support
 
In an effort to provide low-cost Quick shipping, We ship from 5 warehouses throughout the US.

3:30PM PST from California
3:30PM CST from Illinois
3:30PM CST from Texas
3:30PM EST from MA
3:30PM EST from Georgia.

 
 
Since 2007 ... We stand behind our Non-OEM products, manufactured under ISO 9001 certifications. 100% satisfaction or you may return your purchase to us within 6 months of purchase for a replacement or exchange, free of charge. OEM Products come with a manufacturer warranty only.
 
3D Printing (12)
Airwolf (24)
Amano (68)
Apple (78)
Brother (12971)
Canon (15383)
Casio (630)
Citizen (250)
Copystar (786)
Danka/Infotec (48)
DEC (25)
Dell (1755)
Epson (4264)
Fujitsu (22)
Gestetner (1537)
Hasler (26)
Hitachi (15)
HP (37216)
IBM (1518)
KIP (36)
Kodak (171)
Konica Minolta (4300)
Kyocera Mita (2335)
Lanier (1820)
Lexmark (9112)
MakerBot (48)
Muratec (234)
Nashuatec (74)
NEC (155)
Neopost (34)
OkiData (4570)
Olivetti (221)
Panasonic (1602)
Pitney Bowes (981)
Printek (11)
Printronix (243)
RepRap (24)
Rex Rotary (28)
Ricoh (4492)
Risograph (340)
Samsung (6008)
Savin (1761)
Sharp (4547)
Smith Corona (886)
Star Micronics (322)
Tally Genicom (378)
Texas Instruments (139)
Toshiba (1499)
Underwood (15)
Unisys (24)
Xerox (7383)
Zebra (44)
4 Products for the Brother DCP-7010 Digital Copier Printer
You Are Here: >  Top >  Brother >  DCP - Copy Machine >  DCP-7010

BROTHER DCP-7010 TONER CARTRIDGE

Brother DCP-7010 Toner Cartridge - 2,500 Pages
  OVER 100
IN STOCK NOW

Price:  $15.89
Product Description
Toner Cartridge for Brother DCP-7010 Laser Printer

This Toner Cartridge prints 2500 pages with an average 5% page coverage. The amount of pages can vary depending upon the amount of ink printed onto each page. (5% page coverage is a standard Brother specification)


This product comes with a 6 month Warranty against any defects (including free replacement). We stand behind our products 100%, as these are not manufactured by Brother.

Why toner? Why not call it ink? Regular ink dries quickly, which is why cartridges for inkjet printers do not last long. Laser Printers use toner, which is ink in the form of powder. A sealed toner cartridge can be stored for 2+ years prior to usage.


Product Manuals
When do I Replace a Toner Cartridge in the Brother DCP-7010
The lifespan of the toner cartridge installed in your Brother DCP-7010 is approx. 2,500 pages. You can extend the useful life of the installed toner cartridge by selecting [Ecology] – [Toner Save]. The installed toner cartridge should be replaced if any of the listed indications persists.
The message [No Cartridge] is displayed
The message [Toner Life End] is displayed
The message [Toner Low] is displayed
Insufficient toner density
Gray background
Toner stains down the page
White vertical lines
How to Install a Toner Cartridge in the Brother DCP-7010
In the first step of the replacement procedure, you must open the front cover of your Brother DCP-7010, and then remove the drum unit and toner cartridge assembly. After that, you must press the lock release button, and then remove the exhausted toner cartridge from the drum unit. Now, you must take the new toner cartridge out of the aluminum bag, and then shake it several times from side to side. In the next step of the replacement procedure, you must remove the protective cover from the new toner cartridge, and then install the cartridge into the drum unit. Once the new toner cartridge is installed, you must clean the primary corona wire, and then reinstall the drum unit and toner cartridge assembly. Finally, you must close the front cover of your Brother DCP-7010.
How to Install an ADF Unit in the Brother DCP-7010
In the initial step of the replacement procedure, you must make sure that the Brother DCP-7010 is switched off, and then open the ADF unit. After that, you must open the scanner unit, and then remove the taptite screw. Now, you must remove the ADF FG harness and the FB FG harness, and then unplug the two ADF connectors from the main PCB. In the next step of the replacement procedure, you must unplug the two connectors of the scanner unit from the main PCB, and then close the ADF unit and the scanner unit. After that, you must detach the ADF cover by removing the two pins, and then release the two hooks of the pressure roller assembly. Now, you must remove the pressure roller assembly, and then detach the LF springs from the ADF cover. Once the LF springs are removed, you must remove the two rollers from the pressure roller shaft, and then open the ADF unit. Next, you must detach the gear cover from the ADF unit by releasing the hook, and then close the ADF unit. After that, you must remove the bushing and the roller shaft assembly from the ADF unit, and then remove the four taptite screws. In the next step, you must remove the upper document chute by releasing the three hooks, and then remove the separation rubber assembly from the upper chute. Once you have removed the separation rubber assembly, you must detach the separation rubber from the ADF plate spring, and then remove the two screws from the lower document chute. Next, you must remove the lower document chute by releasing the two hooks, and then remove the ejection roller assembly by releasing its hook from the ADF unit. After that, you must remove the ejections rollers from the pressure shaft, and then remove the ADF unit ejection spring. Once the ejection spring is detached, you must remove the following components:
Resin bearing
LF roller assembly
Ejection roller assembly (lower chute)
Ejection roller bearing (lower chute)
Drive frame assembly (lower chute)
ADF motor
ADF motor harness
Rear actuator (lower chute)
Front actuator (lower chute)
ADF sensor PCB
ADF sensor harness assembly
Document hold
Document spring
Document cover assembly
Pressure roller assembly
Hinge arm
Once all of the listed components are removed, you must detach the ADF unit from your Brother DCP-7010, and then unpack the replacement component. Finally, you must install the new ADF unit by executing the current procedure in reverse order.
How to Install a Control Panel in the Brother DCP-7010
Initially, you must make sure that your Brother DCP-7010 is switched off, and then remove the four taptite screws from the scanner unit. After that, you must release the four hooks, and then unplug the control panel connector from the PCB assembly. Now, you must detach the control panel from the scanner unit by releasing the three hooks, and then detach the LCD harness from the PCB of the control panel. In the next step of the replacement procedure, you must remove the control panel PCB from the control panel cover by releasing the three hooks, and then remove the rubber keyboard. Next, you must remove the backlight guide by releasing the two hooks, and then remove the diffusion film. Once the diffusion film has been removed, you must remove the LCD by releasing the two hooks, and then unpack the new control panel. Finally, you must install the new control panel by executing the current procedure in reverse order.
How to Install a Fuser Heat Roller in the Brother DCP-7010
You must start the replacement procedure by switching your Brother DCP-7010 off. After that, you must disconnect the harness connectors of the heater and the thermistor, and then remove the two screws that fix the fuser assembly unit into place. Now, you must remove the fuser assembly unit from the Brother DCP-7010, and then remove the PR springs. In the next step of the replacement procedure, you must detach the pressure roller assembly from the fuser frame, and then remove the PR arm assemblies. Once the arm assemblies are removed, you must remove the PR bush from the pressure roller, and then remove the four separate claw assemblies by releasing the hooks from the springs. Next, you must remove the two screws that secure the exhausted heat roller into place, and then remove the exhausted component from the fuser assembly unit. Finally, you must unpack the new fuser heat roller, and then install it by executing the current procedure in reverse order.
How to Install a Main Motor Assembly in the Brother DCP-7010
In the first step of the replacement procedure, you must make sure that your Brother DCP-7010 is switched off, and then unplug the power cord. After that, you must remove the insulation sheet of the HVPS, and then remove the screws securing the gear plate calking assembly. Now, you must remove the gear plate calking assembly, and then remove the three fixing screws of the main motor assembly. Finally, you must remove the main motor assembly from the Brother DCP-7010, and then install the replacement component by executing the current procedure in reverse order.
How to Install a Main PCB in the Brother DCP-7010
In the first step of the replacement procedure, you must switch the Brother DCP-7010 off, and then unplug the power cord. After that, you must disconnect all thirteen connectors from the Main PCB, and then remove the five cup taptite screws. Now, you must remove the FG harness assembly, and then remove the two flat taptite screws. In the next step of the replacement procedure, you must remove the Main PCB from the printer frame, and then unpack the replacement component. Finally, you must install the new Main PCB by executing the current procedure in reverse order.
How to Install a Speaker in the Brother DCP-7010
In the first step of the replacement procedure, you must switch your Brother DCP-7010 off, and then unplug the power cord. After that, you must unplug the speaker connector from the main PCB, and then remove the speaker cover by releasing the three hooks. Now, you must remove the speaker hold spring by releasing its hook, and then remove the speaker assembly. Finally, you must unpack the new speaker, and then install it by executing the current procedure in reverse order.
BROTHER DCP-7010 DRUM
Brother DCP-7010 Drum Unit - 12,000 Pages
  OVER 100
IN STOCK NOW

Price:  $23.89
DCP-7010 FUSER ASSEMBLY UNIT
Brother DCP-7010 Fuser Assembly (OEM) 230V
Brother

Price:  $107.89
DCP-7010 PAPER TRAY ASSEMBLY
Brother DCP-7010 Paper Tray Assembly (OEM) Light Gray
Brother

Price:  $26.89
 
Sign Up and Save To Get Exclusive Offers!  

Home | About Us | Search | My Account | CUSTOMER SUPPORT | Blog

Copyright © 2005-2016. QuikShip California.

View our Privacy Policy / Conditions of Use

 

TradeMark Disclosure: QuikShip Toner is a registered US Trademark. 3D Printing, Airwolf, Amano, Apple, Brother, Canon, Casio, Citizen, Copystar, Danka/Infotec, DEC, Dell, Epson, Fujitsu, Gestetner, Hasler, Hitachi, HP, IBM, KIP, Kodak, Konica Minolta, Kyocera Mita, Lanier, Lexmark, MakerBot, Muratec, Nashuatec, NEC, Neopost, OkiData, Olivetti, Panasonic, Pitney Bowes, Printek, Printronix, RepRap, Rex Rotary, Ricoh, Risograph, Samsung, Savin, Sharp, Smith Corona, Star Micronics, Tally Genicom, Texas Instruments, Toshiba, Underwood, Unisys, Xerox, Zebra and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by quikshiptoner.com. Any use of a brand name or model designation for a non-OEM cartridge is made solely for purposes of demonstrating compatibility, and unless noted as OEM, All products listed on this site is are non-OEM.

 

 

Popular Ink & Toner