support
 
In an effort to provide low-cost Quick shipping, We ship from 5 warehouses throughout the US.

3:30PM PST from California
3:30PM CST from Illinois
3:30PM CST from Texas
3:30PM EST from MA
3:30PM EST from Georgia.

 
 
Since 2007 ... We stand behind our Non-OEM products, manufactured under ISO 9001 certifications. 100% satisfaction or you may return your purchase to us within 6 months of purchase for a replacement or exchange, free of charge. OEM Products come with a manufacturer warranty only.
 
3D Printing (12)
Airwolf (24)
Amano (68)
Apple (78)
Brother (12971)
Canon (15383)
Casio (630)
Citizen (250)
Copystar (786)
Danka/Infotec (48)
DEC (25)
Dell (1755)
Epson (4264)
Fujitsu (22)
Gestetner (1537)
Hasler (26)
Hitachi (15)
HP (37216)
IBM (1518)
KIP (36)
Kodak (171)
Konica Minolta (4300)
Kyocera Mita (2335)
Lanier (1820)
Lexmark (9112)
MakerBot (48)
Muratec (234)
Nashuatec (74)
NEC (155)
Neopost (34)
OkiData (4570)
Olivetti (221)
Panasonic (1602)
Pitney Bowes (981)
Printek (11)
Printronix (243)
RepRap (24)
Rex Rotary (28)
Ricoh (4492)
Risograph (340)
Samsung (6008)
Savin (1761)
Sharp (4547)
Smith Corona (886)
Star Micronics (322)
Tally Genicom (378)
Texas Instruments (139)
Toshiba (1499)
Underwood (15)
Unisys (24)
Xerox (7383)
Zebra (44)
12 Products for the Brother MFC-7460DN MultiFunction Center
You Are Here: >  Top >  Brother >  MFC - All-in-One >  MFC-7460DN

BROTHER MFC-7460DN DRUM

Brother MFC-7460DN Drum - 12000 Pages
  OVER 100
IN STOCK NOW

Price:  $28.89
Product Description
Drum for Brother MFC-7460DN MultiFunction Center

This Drum is good for printing 12000 pages, on average. Average page coverage is 5% of toner per page (compared to white space on the paper), which is the standard Brother specification for this drum, and a standard measuring term for the consumer printing industry.


This product comes with a 6 month Warranty against any defects (including free replacement). We stand behind our products 100%, as these are not manufactured by Brother.

What's the difference between a drum and a toner cartridge? A toner cartridge is just that: a cartridge that contains toner. The drum does all the work.


Product Manuals
When do I Replace a Drum Unit in the Brother MFC-7460DN Multifunction Printer?
The drum unit installed in your Brother MFC-7460DN Multifunction Printer must be replaced, if any of the described below warning/error messages appears on the control LCD.

''Replace Drum'' – This warning message indicates an exhausted drum unit. In order to avoid a variety of print quality issues, you must install a new drum unit soon.

''Drum Error'' – This error message usually appears when the primary corona wire is dirty. Herein, you should clean the primary corona wire of the drum unit. However, in some cases the message will appear even after a corona wire cleaning has been performed. The only available action in this situation is a new drum unit installation.

''Drum Stop'' – This is an error message which indicates a faulty drum unit. You could continue using your printer with the faulty drum unit, however, the printing quality will be drastically decreased. The recommended action in this situation is a drum unit replacement.

You could easily replace the drum unit in your Brother MFC-7460DN Multifunction Printer by performing the included below replacement procedure.
How to Install a Drum Unit in the Brother MFC-7460DN Multifunction Printer
Important: Before proceeding with the current drum unit replacement procedure, you must open the front printer`s cover while the printer is turned on and wait at least 10 minutes, in order to allow the printer to cool down.

Initially, you must grab the front side of the drum assembly (exhausted drum unit+toner cartridge) and pull towards you, in order to remove the drum assembly from the printer. After that, you must remove the still useable toner cartridge from the exhausted drum unit by pushing down the green lock lever with your left hand and pulling the cartridge upwards with your other hand. Please note that you should avoid touching the contact area of the toner cartridge. Then, you must unpack the new drum unit, but avoid touching the sensitive photoconductive drum, which is located on the top side of the drum unit. Now, you must insert the toner cartridge into the new drum unit, but make sure that it clicks securely into place. Please note that the green lock lever will be automatically raised, if the toner cartridge is installed properly. In the next step of the replacement procedure, you must slide the corona wire cleaning tab (little green tab located on the top side of the drum unit) to the end of the cleaning channel and then back to its ''home'' position. Please note that you should slide the cleaning tab at least 4-5 times to optimally clean the primary corona wire, and then return the tab to its original position. After the corona wire cleaning, you must insert the drum assembly (new drum unit+toner cartridge) into the printer, and then press the [Clear button]. Then, you must confirm the drum counter reset by pressing the [1] button. Finally, you must wait for the following confirmation message ''Accepted'' to appear on the LCD, and then close the front cover of your Brother MFC-7460DN Multifunction Printer.
BROTHER MFC-7460DN DRUM
Brother MFC-7460DN Drum Unit (OEM) made by Brother -Prints 12000 Pages
Brother OVER 100
IN STOCK NOW

Price:  $97.89
BROTHER MFC-7460DN TONER CARTRIDGE
Brother MFC-7460DN Toner Cartridge (Extra Capacity - 2600 Pages)
  OVER 100
IN STOCK NOW

Price:  $13.89
BROTHER MFC-7460DN TONER CARTRIDGE - HIGH YIELD
Brother MFC-7460DN Toner Cartridge (OEM) 2,600 pages
Brother OVER 100
IN STOCK NOW

Price:  $62.89
MFC-7460DN FUSER ASSEMBLY UNIT
Brother MFC-7460DN Fuser Assembly Unit (OEM) 230V
Brother

Price:  $106.89
MFC-7460DN PAPER TRAY
Brother MFC-7460DN Paper Tray Cassette (OEM) Black
Brother

Price:  $26.89
MFC-7460DN FUSER GEAR
Brother MFC-7460DN Fuser Gear (OEM) 28T/34T
Brother

Price:  $2.89
MFC-7460DN MAIN MOTOR
Brother MFC-7460DN Main Motor (OEM)
Brother

Price:  $17.89
BROTHER MFC-7460DN ROLLER HOLDER ASSEMBLY
Brother MFC-7460DN Roller Holder Assembly (OEM)
Brother 5 IN STOCK NOW

Price:  $14.89
MFC-7460DN FUSER FAN ASSEMBLY
Brother MFC-7460DN Fuser Fan Assembly (OEM) 60
Brother

Price:  $14.89
MFC-7460DN DUPLEX TRAY
Brother MFC-7460DN Duplex Tray (OEM)
Brother

Price:  $16.89
MFC-7460DN FUSER COVER
Brother MFC-7460DN Fuser Cover (OEM)
Brother

Price:  $16.89
 
Sign Up and Save To Get Exclusive Offers!  

Home | About Us | Search | My Account | CUSTOMER SUPPORT | Blog

Copyright © 2005-2016. QuikShip California.

View our Privacy Policy / Conditions of Use

 

TradeMark Disclosure: QuikShip Toner is a registered US Trademark. 3D Printing, Airwolf, Amano, Apple, Brother, Canon, Casio, Citizen, Copystar, Danka/Infotec, DEC, Dell, Epson, Fujitsu, Gestetner, Hasler, Hitachi, HP, IBM, KIP, Kodak, Konica Minolta, Kyocera Mita, Lanier, Lexmark, MakerBot, Muratec, Nashuatec, NEC, Neopost, OkiData, Olivetti, Panasonic, Pitney Bowes, Printek, Printronix, RepRap, Rex Rotary, Ricoh, Risograph, Samsung, Savin, Sharp, Smith Corona, Star Micronics, Tally Genicom, Texas Instruments, Toshiba, Underwood, Unisys, Xerox, Zebra and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by quikshiptoner.com. Any use of a brand name or model designation for a non-OEM cartridge is made solely for purposes of demonstrating compatibility, and unless noted as OEM, All products listed on this site is are non-OEM.

 

 

Popular Ink & Toner