Shopper Award
 
 
In an effort to provide low-cost Quick shipping, We ship from 5 warehouses throughout the US.
 
Shipping Until 3:30PM.

3:30PM PSTfromCalifornia
3:30PM CST from Illinois
3:30PM CST from Texas
3:30PM EST from MA
3:30PM EST from Georgia.

 
 
We stand behind our Non-OEM products, remanufactured under ISO 9001 certifications. 100% satisfaction or you may return your purchase to us within 6 months of purchase for a replacement or exchange, free of charge. OEM Products come with a manufacturer warranty only.
 
3D Systems (25)
Amano (71)
Apple (52)
Brother (9737)
Canon (14045)
Casio (518)
Citizen (108)
Copystar (790)
Danka/Infotec (49)
DEC (24)
Dell (1227)
Epson (3159)
Fujitsu (25)
Gestetner (1340)
Hitachi (20)
HP (28685)
IBM (1150)
Kodak (136)
Konica Minolta (3956)
Kyocera Mita (2116)
Lanier (1472)
Lexmark (9413)
Muratec (241)
Nashuatec (129)
NEC (154)
OkiData (3282)
Olivetti (77)
Panasonic (1550)
Pitney Bowes (594)
Printek (29)
Printronix (364)
Rex Rotary (28)
Ricoh (4098)
Risograph (315)
Samsung (6114)
Savin (1558)
Sharp (5001)
Star Micronics (340)
Tally Genicom (413)
Texas Instruments (88)
Toshiba (1634)
Unisys (65)
Xerox (7110)
Zebra (49)
 
 
13 Products for the HP DesignJet 110 Plus Wide Format InkJet Printer
You Are Here: >  Top >  HP >  DesignJet >  DesignJet 110 Plus

HP DESIGNJET 110 PLUS BLACK OEM INK CARTRIDGE

HP DesignJet 110+ Black OEM Ink Cartridge - 2,200 Pages
HP OVER 100
IN STOCK NOW

Price:  $43.89
Product Description
HP DesignJet 110+ Black OEM Ink Cartridge - 2,200 Pages

This black ink cartridge prints 2200 pages. Page Yield is based on HP's manufacturer specifications. The actual yield can vary depending on factors including: paper size, printer settings and how much content is printed onto each page.


This black inkjet cartridge is great not only for printing text and black-and-white/grayscale images, but also needed to efficiently add rich color to your prints.

Product Manuals
How to Install an Ink Cartridge in the HP DesignJet 110 Plus Wide Format InkJet Printer
In the initial step of the replacement procedure, you must open the top right cover by pulling its hinged flap upwards, and then remove the exhausted ink cartridge by pulling it up and out of the HP DesignJet 110 Plus Wide Format InkJet Printer. Please do not shake the used ink cartridges. After that, you must remove the packing material from the replacement ink cartridge, and then align the new component with the corresponding slot inside the compartment. Once the new ink cartridge is correctly aligned, you must lower it into the slot until it clicks into place, and then finalize the replacement procedure by closing the top right cover of your HP DesignJet 110 Plus Wide Format InkJet Printer.
How to Install a Carriage Belt in the HP DesignJet 110 Plus Wide Format InkJet Printer
The replacement of the carriage belt is a complex procedure, which includes the removal of the following components:
1. Top Cover
2. Center Cover
3. Right End Cover
4. Electronics Module
5. Power Supply Unit
6. Service Station
7. Ink Supply Tubes
8. Carriage Assembly
You can find all removal procedures and the replacement procedure listed (in the correct order of execution) below.
Top Cover
You must switch your HP DesignJet 110 Plus Wide Format InkJet Printer off, and then unplug the power cord. After that, you must open the top cover, and then release its clips. Finally, you must remove the top cover by pulling it away from the main unit.
Center Cover
Once the top cover is removed, you must release the ink supply tubes from the raceway holder, and then remove the raceway holder from the HP DesignJet 110 Plus Wide Format InkJet Printer. Next, you must detach the ink supply tubes from the retaining clips of the center cover, and then remove the six screws that secure the center cover to the main frame. Finally, you must open the printhead door, and then remove the center cover from the main unit.
Right End Cover
You must release the sensor from the right end cover, and then remove the mounting screw from the cover. After that, you must remove the screw from the right side bracket, and then release the clips of the right end cover. Finally, you must remove the right end cover from the HP DesignJet 110 Plus Wide Format InkJet Printer.
Electronics Module
In the first step, you must remove the protective plastic cover from the electronics module, and then unplug all cables from the main PCA. Next, you must remove the screws securing the power supply and the electronics module to the main frame of the printer, and then release the plastic sheet from the trailing cable. After that, you must slide the electronics module together with the power supply unit to the right, and then lift the power supply unit to detach it from the electronics module. Finally, you must pull the electronics module out of the printer.
Power Supply Unit
Once you have removed the electronics module, you must disconnect the motor harness cable, and then remove the fixing screw from the grounding strip. In the next step, you must release the power socket by pressing its clips, and then lift the power supply unit out of the HP DesignJet 110 Plus Wide Format InkJet Printer.
Service Station
Initially, you must detach the reinforcement bracket from the HP DesignJet 110 Plus Wide Format InkJet Printer by removing the two screws, and then unplug the service station cable. After that, you must turn the service station motor clockwise to uncap the carriage assembly, and then slide the carriage assembly to the right. Now, you must detach the encoder strip from its holder, and then remove the screw securing the encoder strip holder to the printer chassis. In the next step, you must remove the encoder strip holder, and then pull the service station out of the printer.
Ink Supply Tubes
You must release the tubes bracket from the ink supply station by pushing its clips inwards, and then detach the trailing cable support from the carriage assembly by removing the mounting screw. After that, you must remove the screw securing the tube crane to the carriage assembly, and then lift the tube crane to release the PH cover. Finally, you must release the ink supply tubes, and then remove them from the HP DesignJet 110 Plus Wide Format InkJet Printer.
Carriage Assembly
You must push the turnaround assembly to the left, and release the belt from the motor. After that, you must detach the trailing cable clip from the main frame by removing the three screws, and then release the trailing cable. Now, you must remove the carriage assembly by sliding it to the right.
Carriage Belt
You must detach the exhausted belt from the bottom of the carriage assembly, and then unpack the replacement component. After that, you must install the new carriage belt and reinstall all previously removed components by executing the listed procedures in reverse order, and then align the printheads.
When do I Replace a Carriage Drive Motor in the HP DesignJet 110 Plus Wide Format InkJet Printer?
You should replace the carriage drive motor if the system error [42:10] occurs.
How to Install a Carriage Drive Motor in the HP DesignJet 110 Plus Wide Format InkJet Printer
In the initial step of the replacement procedure, you must make sure that the HP DesignJet 110 Plus Wide Format InkJet Printer is switched off, and then unplug the power cord. Next, you must remove the top cover by releasing its clips, and then release the ink supply tubes from the raceway holder. After that, you must remove the raceway holder, and then detach the ink supply tubes from the center cover. Now, you must remove the six mounting screws from the center cover, open the printhead door, and then remove the center cover. Once the center cover is removed, you must release the door sensor from the right end cover, and then remove the mounting screws from the right end cover and the right side bracket. In the next step of the replacement procedure, you must remove the right end cover by releasing its clips with a flat-blade screwdriver, and then disconnect the front panel cable. After that, you must remove the screw from the rear left trim, and then remove the rear left trim. Next, you must remove the mounting screw from the left end cover, and then release the clips to remove the left end cover. Once the left end cover is removed, you must push the turnaround assembly towards the spring-loaded base and release the belt from the carriage drive motor. In the next step, you must remove the screws securing the carriage drive motor, and then pull the carriage drive motor out of the HP DesignJet 110 Plus Wide Format InkJet Printer. Finally, you must unpack the new carriage drive motor, and then install it by executing the current procedure in reverse order.
HP DESIGNJET 110 PLUS CYAN OEM INK CARTRIDGE
HP DesignJet 110 Plus Wide Format InkJet Printer Cyan Ink Cartridge - 2,350 Pages
HP OVER 50
IN STOCK NOW

Price:  $43.89
HP DesignJet 110+ - Cyan Ink Cartridge - Compatible
Need Cheaper than 43.89?
We also offer a cheaper compatible version of this ink cartridge, NOT manufactured by HP.
30 Days Warranty.
Price: $13.89
HP DESIGNJET 110 PLUS MAGENTA OEM INK CARTRIDGE
HP DesignJet 110 Plus Wide Format InkJet Printer Magenta Ink Cartridge - 2,000 Pages
HP OVER 50
IN STOCK NOW

Price:  $43.89
HP DesignJet 110+ - Magenta Ink Cartridge - Compatible
Need Cheaper than 43.89?
We also offer a cheaper compatible version of this ink cartridge, NOT manufactured by HP.
30 Days Warranty.
Price: $13.89
HP DESIGNJET 110 PLUS YELLOW OEM INK CARTRIDGE
HP DesignJet 110 Plus Wide Format InkJet Printer Yellow Ink Cartridge - 2,550 Pages
HP OVER 50
IN STOCK NOW

Price:  $43.89
HP DesignJet 110+ - Yellow Ink Cartridge - Compatible
Need Cheaper than 43.89?
We also offer a cheaper compatible version of this ink cartridge, NOT manufactured by HP.
30 Days Warranty.
Price: $13.89
HP DESIGNJET 110 PLUS BLACK OEM PRINTHEAD
HP DesignJet 110+ Black OEM Printhead - 16,000 Pages
HP OVER 100
IN STOCK NOW

Price:  $45.89
HP DESIGNJET 110 PLUS CYAN OEM PRINTHEAD
HP DesignJet 110+ Cyan OEM Printhead - 24,000 Pages
HP OVER 50
IN STOCK NOW

Price:  $45.89
HP DESIGNJET 110 PLUS MAGENTA OEM PRINTHEAD
HP DesignJet 110+ Magenta OEM Printhead - 24,000 Pages
HP OVER 50
IN STOCK NOW

Price:  $45.89
HP DESIGNJET 110 PLUS YELLOW OEM PRINTHEAD
HP DesignJet 110+ Yellow OEM Printhead - 24,000 Pages
HP OVER 100
IN STOCK NOW

Price:  $45.89
DESIGNJET 110 PLUS BELT
HP DesignJet 110 Plus Output Belt (OEM) SVC
HP

Price:  $17.89
DESIGNJET 110 PLUS MOTOR
HP DesignJet 110 Plus Carriage Drive Motor (OEM)
HP

Price:  $21.89
DESIGNJET 110 PLUS 24-INCH SPINDLE
HP DesignJet 110 Plus 24-inch Spindle (OEM)
HP

Price:  $85.89
DESIGNJET 110 PLUS MANUAL ROLL FEED
HP DesignJet 110+ Manual Roll Feed (OEM)
HP

Price:  $565.89
HP DESIGNJET 110 PLUS CARRIAGE BELT
HP DesignJet 110 Plus Carriage Belt (OEM)
HP

Price:  $26.89

About My HP Designjet 110Plus Inkjet Large Format Printer

Pages Per Minute
Cost of Consumables
Printer Resolution
Based Off 346 Similar Printers


HP DesignJet 110 Printer Review


Overview:

The HP DesignJet 110 Plus is an outstanding option for any office. It can handle media up to 24 in x 64 in. This unit is compatible with both Mac and Windows. The HP DesignJet 110 Plus is well known for being an excellent wide-format printer useful for lawyers, home remodelers, and those that need to print drawings, layouts, brochures, cards, posters, etc.


Pros:

This unit takes up a lot of space and weighs 48.5 lbs. Output quality with the HP DesignJet 110 Plus is outstanding. With this device you get maximum resolutions for both monochrome and color prints of 1200 dpi x 600 dpi. Color images are of professional quality and colors are extremely accurate.

The HP DesignJet 110 Plus is perfect for businesses looking for a multifunctional machine for printing in-house and eliminating the need to outsource the production of business documents. Companies will save money since they only need to replace individual ink cartridges that run out, which will reduce cost in the long run.


Cons:

The media capacity of this unit is quite limited. It can only handle 150 sheets at a time. Furthermore print speeds are extremely slow.



 

Home | About Us | Search | My Account | CUSTOMER SUPPORT | >Blog

Copyright © 2005-2014. QuikShip California.

View our Privacy Policy / Conditions of Use

 

TradeMark Disclosure: QuikShip Toner is a registered US Trademark. 3D Systems, Amano, Apple, Brother, Canon, Casio, Citizen, Copystar, Danka/Infotec, DEC, Dell, Epson, Fujitsu, Gestetner, Hitachi, HP, IBM, Kodak, Konica Minolta, Kyocera Mita, Lanier, Lexmark, Muratec, Nashuatec, NEC, OkiData, Olivetti, Panasonic, Pitney Bowes, Printek, Printronix, Rex Rotary, Ricoh, Risograph, Samsung, Savin, Sharp, Star Micronics, Tally Genicom, Texas Instruments, Toshiba, Unisys, Xerox, Zebra and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by quikshiptoner.com. Any use of a brand name or model designation for a non-OEM cartridge is made solely for purposes of demonstrating compatibility. All products listed on this site is sold as compatible or remanufactured.

 

 

Popular Ink & Toner