support
 
In an effort to provide low-cost Quick shipping, We ship from 5 warehouses throughout the US.

3:30PM PST from California
3:30PM CST from Illinois
3:30PM CST from Texas
3:30PM EST from MA
3:30PM EST from Georgia.

 
 
Since 2007 ... We stand behind our Non-OEM products, manufactured under ISO 9001 certifications. 100% satisfaction or you may return your purchase to us within 6 months of purchase for a replacement or exchange, free of charge. OEM Products come with a manufacturer warranty only.
 
3D Printing (12)
Airwolf (24)
Amano (68)
Apple (78)
Brother (12971)
Canon (15383)
Casio (630)
Citizen (250)
Copystar (786)
Danka/Infotec (48)
DEC (25)
Dell (1755)
Epson (4264)
Fujitsu (22)
Gestetner (1537)
Hasler (26)
Hitachi (15)
HP (37216)
IBM (1518)
KIP (36)
Kodak (171)
Konica Minolta (4300)
Kyocera Mita (2335)
Lanier (1820)
Lexmark (9112)
MakerBot (48)
Muratec (234)
Nashuatec (74)
NEC (155)
Neopost (34)
OkiData (4570)
Olivetti (221)
Panasonic (1602)
Pitney Bowes (981)
Printek (11)
Printronix (243)
RepRap (24)
Rex Rotary (28)
Ricoh (4492)
Risograph (340)
Samsung (6008)
Savin (1761)
Sharp (4547)
Smith Corona (886)
Star Micronics (322)
Tally Genicom (378)
Texas Instruments (139)
Toshiba (1499)
Underwood (15)
Unisys (24)
Xerox (7383)
Zebra (44)
5 Products for the Kyocera Mita FS-1350dn Laser Printer
You Are Here: >  Top >  Kyocera Mita >  "FS" Series >  FS-1350dn

KYOCERA MITA FS-1350DN TONER CARTRIDGE

Kyocera Mita FS-1350dn Toner Cartridge - 7,200 Pages
  OVER 100
IN STOCK NOW

Price:  $15.89
Product Description
Kyocera Mita FS-1350dn Toner Cartridge - 7,200 Pages

This Toner Cartridge prints 7200 pages with an average 5% page coverage. The amount of pages can vary depending upon the amount of ink printed onto each page. (5% page coverage is a standard Kyocera Mita specification)


This product comes with a 6 month Warranty against any defects (including free replacement). We stand behind our products 100%, as these are not manufactured by Kyocera Mita.

Why toner? Why not call it ink? Regular ink dries quickly, which is why cartridges for inkjet printers do not last long. Laser Printers use toner, which is ink in the form of powder. A sealed toner cartridge can be stored for 2+ years prior to usage.


Product Manuals
When do I Replace a Toner Cartridge in the Kyocera Mita FS-1350dn Laser Printer?
A new, standard-capacity toner cartridge yields up to 7,200 pages. You can check the status of the installed toner cartridge by printing a status page. You should replace the installed toner cartridge if any of the listed messages and print quality problems appears.
[Replace Toner <> Clean printer]
[Toner low]
Completely blank printouts
Vertical black and/or white streaks
Faint or blurred printouts
Gray background
How to Install a Toner Cartridge in the Kyocera Mita FS-1350dn Laser Printer
You must start the replacement procedure by opening the top cover of your Kyocera Mita FS-1350dn Laser Printer. Then, you must pull the lock lever of the used toner cartridge towards you. After that, you must remove the used toner cartridge from the laser printer, and then put it into the plastic bag that is supplied with the new toner cartridge. Now, you must shake the new toner cartridge at least 10 times horizontally, and then remove the label from the new component. In the next step of the replacement procedure, you must insert the new toner cartridge into the Kyocera Mita FS-1350dn Laser Printer, and then push it down until it clicks. Finally, you must turn the lock lever of the new toner cartridge to the locked position, and then close the top cover of the laser printer. Please be aware that there will be a delay of approx. 15 minutes before the Kyocera Mita FS-1350dn Laser Printer gets ready to print/copy.
When do I Replace a Fuser Assembly Unit in the Kyocera Mita FS-1350dn Laser Printer?
You should replace the fuser assembly unit installed in your Kyocera Mita FS-1350dn Laser Printer if:
The error code [6000] is displayed – The temperature of the installed fuser assembly unit does not rise. You should try to solve the problem by reinserting the connectors of the thermistor and the heater lamp. Please replace the installed fuser assembly unit if the problem persists.
The error code [6020] is displayed – The thermistor of the installed fuser assembly unit is defective. You must replace the installed fuser assembly unit with a new one.
The error code [6030] is displayed – This is an indication for a broken thermistor wire. You should reinsert the connector of the thermistor, and then test the Kyocera Mita FS-1350dn Laser Printer. Please replace the installed fuser assembly unit if the error persists.
Dropouts appear – You should try to solve the problem by replacing the developer unit and the drum unit. Please replace the fuser assembly unit if the problem persists.
Repetitive paper jams in the fusing area – This is an indication for extremely dirty or deformed heat and pressure rollers. You should replace the installed fuser assembly unit with a new one.
How to Install a Fuser Assembly Unit in the Kyocera Mita FS-1350dn Laser Printer
In the initial step of the replacement procedure, you must switch the Kyocera Mita FS-1350dn Laser Printer off, and then unplug the power cord. Next, you must open the top cover, and then remove the two mounting screws from the cover. After that, you must release the three hooks of the top cover, unplug the connector, and then remove the top cover from the main unit. Once the top cover is removed, you must remove the paper cassette, open the front cover, and then remove the right cover by unhooking the seven hooks. Now, you must remove the left cover by releasing its hooks, and then unplug the connectors of the heater lamp and the thermistor. In the next step of the replacement procedure, you must release the fuser wires from the clamps, and then unplug the fuser connector. After that, you must remove the rear cover from the laser printer, and then remove the two mounting screws from the exhausted fuser assembly unit. Finally, you must remove the exhausted fuser assembly unit from the Kyocera Mita FS-1350dn Laser Printer, and then install the replacement component by executing the current procedure in reverse order.
KYOCERA MITA FS-1350DN TONER CARTRIDGE
Kyocera FS1350DN Toner Cartridge (OEM) 7,200 Pages
Kyocera Mita OVER 50
IN STOCK NOW

Price:  $68.89
KYOCERA MITA FS-1350DN DRUM
Kyocera FS-1350dn Drum Unit (OEM) 100,000 Pages
Kyocera Mita 16 IN STOCK NOW

Price:  $115.89
KYOCERA MITA FS-1350DN FUSER ASSEMBLY UNIT
Kyocera FS-1350dn Fuser Assembly Unit (OEM)
Kyocera Mita

Price:  $122.89
KYOCERA MITA FS-1350DN PAPER FEEDER
Kyocera Mita FS-1350dn Paper Feeder - 250 Sheets
OVER 50
IN STOCK NOW

Price:  $138.89


Kyocera Mita FS-1350dn Printer Review


Overview:

The Kyocera Mita FS-1350dn has the ability to grow along with your business. This unit lacks faxing capabilities, but delivers fast print speeds.


Pros:

The price of consumables for the Kyocera Mita FS-1350dn is affordable. Black toner cartridges yield around 7,200 prints. Affordable replacement cartridges can easily be purchased online. The Kyocera Mita FS-1350dn delivers outstanding output. Text is sharp and easily readable at smaller fonts.

This unit comes with 128MB of memory that can be upgraded to 1,152MB. The FS-1350dn comes with a 250-sheet input tray, 50-sheet multimedia tray and a 250-sheet output tray. Optional trays are available that will increase its paper capacity to 800 sheets.

Stop standing around in the morning waiting for your printer to warm up. The Kyocera Mita FS-1350dn provides an outstanding solution with warm up times of just 15 seconds. This printer can deliver 30 pages per minute. It is compatible with all major operating systems. Simply connect it to your computer using a USB port or Ethernet interface.


Cons:

One drawback to the Kyocera Mita FS-1350dn is its lacks of finishing capabilities. Automatic sorting and booklet making can save you the time of handling these functions manually.



 
Sign Up and Save To Get Exclusive Offers!  

Home | About Us | Search | My Account | CUSTOMER SUPPORT | Blog

Copyright © 2005-2016. QuikShip California.

View our Privacy Policy / Conditions of Use

 

TradeMark Disclosure: QuikShip Toner is a registered US Trademark. 3D Printing, Airwolf, Amano, Apple, Brother, Canon, Casio, Citizen, Copystar, Danka/Infotec, DEC, Dell, Epson, Fujitsu, Gestetner, Hasler, Hitachi, HP, IBM, KIP, Kodak, Konica Minolta, Kyocera Mita, Lanier, Lexmark, MakerBot, Muratec, Nashuatec, NEC, Neopost, OkiData, Olivetti, Panasonic, Pitney Bowes, Printek, Printronix, RepRap, Rex Rotary, Ricoh, Risograph, Samsung, Savin, Sharp, Smith Corona, Star Micronics, Tally Genicom, Texas Instruments, Toshiba, Underwood, Unisys, Xerox, Zebra and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by quikshiptoner.com. Any use of a brand name or model designation for a non-OEM cartridge is made solely for purposes of demonstrating compatibility, and unless noted as OEM, All products listed on this site is are non-OEM.

 

 

Popular Ink & Toner