In an effort to provide low-cost Quick shipping, We ship from 5 warehouses throughout the US.

3:30PM PST from California
3:30PM CST from Illinois
3:30PM CST from Texas
3:30PM EST from MA
3:30PM EST from Georgia.

Since 2007 ... We stand behind our Non-OEM products, manufactured under ISO 9001 certifications. 100% satisfaction or you may return your purchase to us within 6 months of purchase for a replacement or exchange, free of charge. OEM Products come with a manufacturer warranty only.
3D Printing (12)
Airwolf (24)
Amano (68)
Apple (78)
Brother (12971)
Canon (15383)
Casio (630)
Citizen (250)
Copystar (786)
Danka/Infotec (48)
DEC (25)
Dell (1755)
Epson (4264)
Fujitsu (22)
Gestetner (1537)
Hasler (26)
Hitachi (15)
HP (37216)
IBM (1518)
KIP (36)
Kodak (171)
Konica Minolta (4300)
Kyocera Mita (2335)
Lanier (1820)
Lexmark (9112)
MakerBot (48)
Muratec (234)
Nashuatec (74)
NEC (155)
Neopost (34)
OkiData (4570)
Olivetti (221)
Panasonic (1602)
Pitney Bowes (981)
Printek (11)
Printronix (243)
RepRap (24)
Rex Rotary (28)
Ricoh (4492)
Risograph (340)
Samsung (6008)
Savin (1761)
Sharp (4547)
Smith Corona (886)
Star Micronics (322)
Tally Genicom (378)
Texas Instruments (139)
Toshiba (1499)
Underwood (15)
Unisys (24)
Xerox (7383)
Zebra (44)
7 Products for the Kyocera Mita FS-3830n Laser Printer
You Are Here: >  Top >  Kyocera Mita >  "FS" Series >  FS-3830n


Kyocera Mita FS-3830n Toner Cartridge - 20,000 Pages
  OVER 50

Price:  $37.89
Product Description
Kyocera Mita FS-3830n Toner Cartridge - 20,000 Pages

This Toner Cartridge prints 20000 pages with an average 5% page coverage. The amount of pages can vary depending upon the amount of ink printed onto each page. (5% page coverage is a standard Kyocera Mita specification)

This product comes with a 6 month Warranty against any defects (including free replacement). We stand behind our products 100%, as these are not manufactured by Kyocera Mita.

Why toner? Why not call it ink? Regular ink dries quickly, which is why cartridges for inkjet printers do not last long. Laser Printers use toner, which is ink in the form of powder. A sealed toner cartridge can be stored for 2+ years prior to usage.

Product Manuals
When do I Replace a Toner Cartridge in the Kyocera Mita FS-3830N Laser Printer?
You can check the status of the installed toner cartridge by printing a Status Page. To print a Status Page, you must press the [MENU] key, and then select [Print Status Page]. The installed toner cartridge should be replaced in the following circumstances:

Printouts are blank

Black or white vertical streaks appear

Faint or blurred printouts

Background is grey

The message [Replace toner <> Clean printer] is displayed – The installed toner cartridge is empty. You must install a new toner cartridge to be able to continue printing.

The message [Toner Low] is displayed – The Kyocera Mita FS-3830N Laser Printer has detected that the installed toner cartridge is nearly empty. You should install a new toner cartridge soon.
How to Install a Toner Cartridge in the Kyocera Mita FS-3830N Laser Printer
Initially, you must open the top cover of your Kyocera Mita FS-3830N Laser Printer, and then slide the cartridge-release lever to the right. Next, you must pull the used toner cartridge out of the laser printer, and then take the replacement component out of the plastic bag. After that, you must loosen the toner by shaking the new cartridge 10-15 times up and down, and then remove the protective seal from the new component. Once the new toner cartridge is prepared, you must slide it into the slot until it locks into place, and then close the top cover of your Kyocera Mita FS-3830N Laser Printer. Now, you must open the left cover, and then clean the charger wire by pulling the cleaning knob in and out several times. In the next step of the replacement procedure, you must slide the cleaning knob into the printer, and then remove the cap from the grid cleaner. After that, you must pull the charger unit approximately 2 inches towards you, and then attach the grid cleaner. Next, you must slide the charger unit several times in and out, and then remove the grid cleaner. At this stage of the replacement procedure, you must slide the charger unit into the laser printer as far as it will go, and then close the left cover. Finally, you must press the [MENU] key, and then reset the toner counter by selecting [Life Counters] – [New Toner Installed].
Kyocera FS-3830n Toner Cartridge (OEM) 20,000 Pages
Kyocera Mita 38 IN STOCK NOW

Price:  $83.89
Kyocera Mita FS-3830n Drum Unit (OEM) 300,000 Pages
Kyocera Mita

Price:  $234.89
Kyocera Mita FS-3830n Fuser Kit (OEM) 300,000 Pages

Price:  $671.89
Kyocera FS-3830n Fuser Assembly Unit (OEM) 300,000 Pages
Kyocera Mita

Price:  $165.89
Kyocera FS-3830n Developer Unit (OEM) 300,000 Pages
Kyocera Mita 5 IN STOCK NOW

Price:  $163.89
Kyocera Mita FS-3830n Feed Unit (OEM)
Kyocera Mita 11 IN STOCK NOW

Price:  $61.89

About My Kyocera Mita FS-3830N Laser Printer

Pages Per Minute
Cost of Consumables
Printer Resolution
Based Off 1659 Similar Printers

Kyocera Mita FS-3830n Printer Review


The Kyocera-Mita FS-3830n offers outstanding output at an affordable price. It can handle a lot of paper which saves you the time of having to add more sheets. The machine doesn’t take long to warm-up and is ready to print in just 15 seconds. It offers speeds of up to 35 pages per minute on letterhead and 29 pages per minute on legal sized paper.


The Kyocera Mita FS-3830n is an outstanding printer that offers a resolution of up to 2400dpi. It packs a variety of outstanding options. With the Kyocera Mita FS-3830n you get a 500-sheet paper drawer and a 100-sheet multipurpose tray for specialty paper. It can print on a variety of media types including envelopes, labels, and card stock. An additional 2,000-sheet paper feeder can be added for people with high volume printing needs.

Toner cartridges are easy to remove and replace. The Kyocera-Mita FS-3830 comes with a 10,000 page starter toner cartridge. Standard toner cartridges yield 20,000 pages.

Another way that the FS-3830 will save you money is it duplex printing features. This will reduce your paper usage. The device offers a number of connective options, including a parallel and high-speed USB port, as well as an Ethernet networking base.


One shortcoming of the Kyocera Mita FS-3830n is that it lacks color printing capabilities. Many offices use color printing to enhance the effectiveness of documents. Another drawback of this printer is that it lacks faxing as well.

Sign Up and Save To Get Exclusive Offers!  

Home | About Us | Search | My Account | CUSTOMER SUPPORT | Blog

Copyright © 2005-2016. QuikShip California.

View our Privacy Policy / Conditions of Use


TradeMark Disclosure: QuikShip Toner is a registered US Trademark. 3D Printing, Airwolf, Amano, Apple, Brother, Canon, Casio, Citizen, Copystar, Danka/Infotec, DEC, Dell, Epson, Fujitsu, Gestetner, Hasler, Hitachi, HP, IBM, KIP, Kodak, Konica Minolta, Kyocera Mita, Lanier, Lexmark, MakerBot, Muratec, Nashuatec, NEC, Neopost, OkiData, Olivetti, Panasonic, Pitney Bowes, Printek, Printronix, RepRap, Rex Rotary, Ricoh, Risograph, Samsung, Savin, Sharp, Smith Corona, Star Micronics, Tally Genicom, Texas Instruments, Toshiba, Underwood, Unisys, Xerox, Zebra and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by Any use of a brand name or model designation for a non-OEM cartridge is made solely for purposes of demonstrating compatibility, and unless noted as OEM, All products listed on this site is are non-OEM.



Popular Ink & Toner