support
 
In an effort to provide low-cost Quick shipping, We ship from 5 warehouses throughout the US.

3:30PM PST from California
3:30PM CST from Illinois
3:30PM CST from Texas
3:30PM EST from MA
3:30PM EST from Georgia.

 
 
Since 2007 ... We stand behind our Non-OEM products, manufactured under ISO 9001 certifications. 100% satisfaction or you may return your purchase to us within 6 months of purchase for a replacement or exchange, free of charge. OEM Products come with a manufacturer warranty only.
 
3D Printing (12)
Airwolf (24)
Amano (68)
Apple (78)
Brother (12971)
Canon (15383)
Casio (630)
Citizen (250)
Copystar (786)
Danka/Infotec (48)
DEC (25)
Dell (1755)
Epson (4264)
Fujitsu (22)
Gestetner (1537)
Hasler (26)
Hitachi (15)
HP (37216)
IBM (1518)
KIP (36)
Kodak (171)
Konica Minolta (4300)
Kyocera Mita (2335)
Lanier (1820)
Lexmark (9112)
MakerBot (48)
Muratec (234)
Nashuatec (74)
NEC (155)
Neopost (34)
OkiData (4570)
Olivetti (221)
Panasonic (1602)
Pitney Bowes (981)
Printek (11)
Printronix (243)
RepRap (24)
Rex Rotary (28)
Ricoh (4492)
Risograph (340)
Samsung (6008)
Savin (1761)
Sharp (4547)
Smith Corona (886)
Star Micronics (322)
Tally Genicom (378)
Texas Instruments (139)
Toshiba (1499)
Underwood (15)
Unisys (24)
Xerox (7383)
Zebra (44)
16 Products for the Lexmark E322 Laser Printer
You Are Here: >  Top >  Lexmark >  "E" Series >  E322

LEXMARK E322 TONER CARTRIDGE

Lexmark E322/E322n Toner Cartridge - Prints 6000 Pages
  OVER 50
IN STOCK NOW

Price:  $53.89
Product Description
Lexmark E322/E322n Toner Cartridge - 6,000 Pages
This Toner is designed for Use in any of the Following Printers:

Lexmark E322, E322n


This Toner Cartridge prints 6000 pages with an average 5% page coverage. The amount of pages can vary depending upon the amount of ink printed onto each page. (5% page coverage is a standard Lexmark specification)


This product comes with a 6 month Warranty against any defects (including free replacement). We stand behind our products 100%, as these are not manufactured by Lexmark.

Why toner? Why not call it ink? Regular ink dries quickly, which is why cartridges for inkjet printers do not last long. Laser Printers use toner, which is ink in the form of powder. A sealed toner cartridge can be stored for 2+ years prior to usage.


Product Manuals
When do I Replace a Toner Cartridge in the Lexmark E322 Laser Printer?
The lifespan of the toner cartridge installed in your Lexmark E332 Laser Printer depends on the toner coverage of your print jobs. Please note that you can conserve toner by decreasing Toner Darkness. You can check how much toner is left in the installed cartridge by printing a menu settings page.
The installed toner cartridge should be replaced when/if any of the listed messages and print quality problems appears.
The [Toner Low/Replace PC Kit] indicator is on – The installed toner cartridge is nearing end of life. To maintain optimal print quality, you should install a new toner cartridge soon after the initial appearance of the Toner Low light sequence.
The [Toner Low/Replace PC Kit] and the [Error] indicators are on – The Lexmark E332 Laser Printer has detected a toner cartridge error. You should reinstall the toner cartridge, and then check the printer status. Please replace the installed toner cartridge with a new one if the problem persists.
The [Toner Low/Replace PC Kit] indicator is on and the [Error] indicator flashes – The installed toner cartridge is incompatible. Please install a new toner cartridge that is designed for use in your Lexmark E332 Laser Printer.
White lines appear
Streaked horizontal lines
Streaked vertical lines
Insufficient toner darkness
Print density is too high
Toner specks
Background shading
Uneven print density
Ghosting
Blank pages
How to Install a Toner Cartridge in the Lexmark E322 Laser Printer

Initially, you must press the release button located on the left side of your Lexmark E332 Laser Printer, and then open the front cover. After that, you must unlock the exhausted toner cartridge by pressing the button located on the front side of the drum unit, and then pull the exhausted component carefully out of the laser printer. Now, you must remove the packing material from the new toner cartridge, and then redistribute the toner by shaking the new component several times from side to side. In the next step of the replacement procedure, you must align the new toner cartridge with the drum unit, and then insert it until it locks into place. Finally, you must close the front cover of your Lexmark E332 Laser Printer.

When do I Replace a Fuser Assembly Unit in the Lexmark E322 Laser Printer?
The fuser assembly unit affixes the toner to the paper. You should replace the installed fuser assembly unit if any of the listed indications and print quality problems appears.
All operator panel lights blink in a continuous pattern – The Lexmark E322 Laser Printer has detected a hardware malfunction. You should press the operator panel button to view the secondary indication. If the [Toner Low] indicator remains on (after you have pressed the operator panel button), you must turn the Lexmark E322 Laser Printer off, wait at least 10 minutes, and then test the machine. Please replace the installed fuser assembly unit if the same error occurs.
Paper curls/wrinkles – The fuser backup roller has reached end of life. Please replace the installed fuser assembly unit with a new one.
Poor fusing; Toner rubs off the page; - The installed fuser assembly unit is defective. Please install a new fuser assembly unit in your Lexmark E322 Laser Printer.
Toner stains on the unprinted side of the page – You should try to improve print quality by cleaning the paper path. Please replace the installed fuser assembly unit if print quality remains unsatisfactory.
How to Install a Fuser Assembly Unit in the Lexmark E322 Laser Printer
Please switch the Lexmark E322 Laser Printer off and unplug the power cord before proceeding with the replacement procedure.
Initially, you must open the front cover of your Lexmark E322 Laser Printer, and then disengage the arm hinges of the front cover from the charge roll assembly by removing the two plastic clips. Next, you must remove the front cover by releasing it from the pivot points, and then detach the top cover by removing the two mounting screws. After that, you must remove the left side cover by releasing the tabs and removing the mounting screw, and then press the two finger tabs of the right side cover while releasing the center tab to remove the right side cover from the Lexmark E322 Laser Printer. Now, you must remove the screw from the cover of the controller card, and then remove the four screws of the controller card and the two screws of the parallel cable. In the next step of the replacement procedure, you must unplug all cables from the controller card, and then remove the controller card from the main unit. Once the controller card is removed, you must remove the rear mounting screw of the controller card cage, and then detach the cage by loosening the three remaining screws. At this stage of the procedure, you must remove the two screws from the cooling fan, and then remove the toner cartridge from the laser printer. Next, you must detach the top cover of the fuser assembly unit by removing the two screws, and then remove the two brackets from the charge roll assembly. After that, you must remove the charge roll assembly from the Lexmark E322 Laser Printer, and then remove the four bottom cover screws. Now, you must unplug the thermistor connector from the engine card, and then remove the two mounting screws of the exhausted fuser assembly unit. In the next step, you must disconnect the fuser wires, and then remove the exhausted fuser assembly unit from the Lexmark E322 Laser Printer. Finally, you must unpack the new fuser assembly unit, and then install it by executing the current procedure in reverse order.
How to Install a Printhead Assembly in the Lexmark E322 Laser Printer
Initially, you must switch the Lexmark E322 Laser Printer off, and then open the front cover. Next, you must remove the two plastic clips from the support arm hinges of the front cover, disengage the arm hinges from the charge roll assembly, and then release the front cover from its pivot points. After that, you must remove the two screws securing the top cover to the main frame, and then remove the top cover from the laser printer. Now, you must remove the four screws from the top side of the printhead mounting plate, and then remove the screw from the ground strap of the plate. In the next step of the replacement procedure, you must remove the controller cage screw from the mounting plate of the printhead assembly, and then disconnect the printhead cables. Once all cables are disconnected, you must remove the three mounting screws from the printhead assembly, and then then pull the printhead assembly out of the Lexmark E322 Laser Printer. Next, you must unpack the new printhead assembly, and then install it by executing the current procedure in reverse order. Finally, you must perform a registration check and adjust the new printhead assembly by executing the maintenance procedure included below.
1. Open the front door of your Lexmark E322 Laser Printer
2. Turn the printer on while pressing the [Cancel] button
3. Hold the [Cancel] button until the error light comes on, and then close the front door.
4. Wait until the four top indicators light
5. Press the [Cancel] button three times
6. Press and hold the [Continue] button until the indicators cycle
7. Wait for the Lexmark E322 Laser Printer to start printing, and then press the [Cancel] button.
8. Adjust the new printhead assembly.
LEXMARK E322 TONER CARTRIDGE
Lexmark E322 Toner Cartridge (OEM)
Lexmark 10 IN STOCK NOW

Price:  $220.89
E322 PRINTHEAD ASSEMBLY
Lexmark E322 Printhead Assembly
 

Price:  $112.89
LEXMARK E322 TONER FOR PRINTING CHECKS
Lexmark E322/E322n MICR Toner Cartridge - 6,000 Pages
  OVER 50
IN STOCK NOW

Price:  $86.89
LEXMARK E322 FUSER ASSEMBLY UNIT
Lexmark E322 Fuser Assembly Unit - 110V
 

Price:  $85.89
E322 PAPER CASSETTE
Lexmark E322 Paper Cassette (OEM) 250 Sheets
Lexmark

Price:  $134.89
LEXMARK E322 SEPARATION PAD
Lexmark E322 Separation Pad
 

Price:  $16.89
LEXMARK E322 TRANSFER ROLLER
Lexmark E322 Transfer Roller
 

Price:  $22.89
E322 IDLER ROLLER ASSEMBLY
Lexmark E322 Idler Roller Assembly (OEM)
Lexmark

Price:  $20.89
LEXMARK E322 EXIT IDLER ROLLER
Lexmark E322 Exit Idler Roller (OEM)
Lexmark

Price:  $9.89
LEXMARK E322 UPPER FUSER ROLLER
Lexmark E322 Upper Fuser Roller (OEM)
Lexmark

Price:  $31.89
E322 LEFT HAND TRANSFER BUSHING
Lexmark E322 Left Hand Transfer Bushing (OEM)
Lexmark

Price:  $10.89
E322 PARTS PACK
Lexmark E322 Parts Pack (OEM)
Lexmark

Price:  $9.89
LEXMARK E322 EXIT REDRIVE ROLLER
Lexmark E322 Fuser Exit Redrive Roller (OEM)
Lexmark

Price:  $17.89
E322 CARD ASSEMBLY SDRAM MEMORY DIMM
Lexmark E322 Card Assembly SDRAM Memory DIMM (OEM) 16MB
Lexmark

Price:  $193.89
E322 BEARING
Lexmark E322 Bearing Transfer (OEM)
Lexmark

Price:  $7.89

About My Lexmark E322 High Voltage Laser Printer

Pages Per Minute
Cost of Consumables
Printer Resolution
Based Off 1659 Similar Printers


Lexmark E322 Printer Review


Overview:

The Lexmark E322 laser printer is compact and affordable. It is a personal laser printer that offers decent output speeds. The quality of text documents is exceptional for a printer in its class.


Pros:

This unit offers outstanding features for a personal laser printer. The standard paper capacity is 150 sheets which can be expanded to 400 sheets without costing you a lot. Its processer is fast at 133 MHZ. This will allow you to get a lot of printing done.

The Lexmark E322 offers USB and parallel connections. Additionally an Ethernet connection can be added.

Toner cartridges for this unit are affordable. Standard cartridges for the Lexmark E322 yield 3,000 pages and high yield toner cartridges yield 6,000 pages. Output quality is outstanding as well. Text is sharp and shows no signs of feathering. Graphics and photo quality, however, are a bit lackluster.

Overall, the Lexmark E322 is an outstanding option for offices looking for an affordable printing option.


Cons:

There are several drawbacks to owning the Lexmark E322. The unit lacks built in networking. Furthermore it doesn’t offer color printing. Color printing is essential to producing marketing documents since high quality color prints will increase the effectiveness of your company’s presentation.



 
Sign Up and Save To Get Exclusive Offers!  

Home | About Us | Search | My Account | CUSTOMER SUPPORT | Blog

Copyright © 2005-2016. QuikShip California.

View our Privacy Policy / Conditions of Use

 

TradeMark Disclosure: QuikShip Toner is a registered US Trademark. 3D Printing, Airwolf, Amano, Apple, Brother, Canon, Casio, Citizen, Copystar, Danka/Infotec, DEC, Dell, Epson, Fujitsu, Gestetner, Hasler, Hitachi, HP, IBM, KIP, Kodak, Konica Minolta, Kyocera Mita, Lanier, Lexmark, MakerBot, Muratec, Nashuatec, NEC, Neopost, OkiData, Olivetti, Panasonic, Pitney Bowes, Printek, Printronix, RepRap, Rex Rotary, Ricoh, Risograph, Samsung, Savin, Sharp, Smith Corona, Star Micronics, Tally Genicom, Texas Instruments, Toshiba, Underwood, Unisys, Xerox, Zebra and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by quikshiptoner.com. Any use of a brand name or model designation for a non-OEM cartridge is made solely for purposes of demonstrating compatibility, and unless noted as OEM, All products listed on this site is are non-OEM.

 

 

Popular Ink & Toner