support
 
In an effort to provide low-cost Quick shipping, We ship from 5 warehouses throughout the US.

3:30PM PST from California
3:30PM CST from Illinois
3:30PM CST from Texas
3:30PM EST from MA
3:30PM EST from Georgia.

 
 
Since 2007 ... We stand behind our Non-OEM products, manufactured under ISO 9001 certifications. 100% satisfaction or you may return your purchase to us within 6 months of purchase for a replacement or exchange, free of charge. OEM Products come with a manufacturer warranty only.
 
3D Printing (12)
Airwolf (24)
Amano (68)
Apple (78)
Brother (12971)
Canon (15383)
Casio (630)
Citizen (250)
Copystar (786)
Danka/Infotec (48)
DEC (25)
Dell (1755)
Epson (4264)
Fujitsu (22)
Gestetner (1537)
Hasler (26)
Hitachi (15)
HP (37216)
IBM (1518)
KIP (36)
Kodak (171)
Konica Minolta (4300)
Kyocera Mita (2335)
Lanier (1820)
Lexmark (9112)
MakerBot (48)
Muratec (234)
Nashuatec (74)
NEC (155)
Neopost (34)
OkiData (4570)
Olivetti (221)
Panasonic (1602)
Pitney Bowes (981)
Printek (11)
Printronix (243)
RepRap (24)
Rex Rotary (28)
Ricoh (4492)
Risograph (340)
Samsung (6008)
Savin (1761)
Sharp (4547)
Smith Corona (886)
Star Micronics (322)
Tally Genicom (378)
Texas Instruments (139)
Toshiba (1499)
Underwood (15)
Unisys (24)
Xerox (7383)
Zebra (44)
20 Products for the Lexmark E332 Laser Printer
You Are Here: >  Top >  Lexmark >  "E" Series >  E332

LEXMARK E332 TONER CARTRIDGE

Lexmark E332 Toner Cartridge - Prints 6000 Pages
  OVER 50
IN STOCK NOW

Price:  $38.89
Product Description
Lexmark E332 Toner (Lexmark E332n Toner, Lexmark E332tn Toner)

This Toner Cartridge prints 6000 pages with an average 5% page coverage. The amount of pages can vary depending upon the amount of ink printed onto each page. (5% page coverage is a standard Lexmark specification)


This product comes with a 6 month Warranty against any defects (including free replacement). We stand behind our products 100%, as these are not manufactured by Lexmark.

Why toner? Why not call it ink? Regular ink dries quickly, which is why cartridges for inkjet printers do not last long. Laser Printers use toner, which is ink in the form of powder. A sealed toner cartridge can be stored for 2+ years prior to usage.


Product Manuals
When do I Replace a Toner Cartridge in the Lexmark E332 Laser Printer?
The lifespan of the toner cartridge installed in your Lexmark E332 Laser Printer depends on the toner coverage of your print jobs. Please note that you can conserve toner by decreasing Toner Darkness. You can check how much toner is left in the installed cartridge by printing a menu settings page.
The installed toner cartridge should be replaced when/if any of the listed messages and print quality problems appears.
The [Toner Low/Replace PC Kit] indicator is on – The installed toner cartridge is nearing end of life. To maintain optimal print quality, you should install a new toner cartridge soon after the initial appearance of the Toner Low light sequence.
The [Toner Low/Replace PC Kit] and the [Error] indicators are on – The Lexmark E332 Laser Printer has detected a toner cartridge error. You should reinstall the toner cartridge, and then check the printer status. Please replace the installed toner cartridge with a new one if the problem persists.
The [Toner Low/Replace PC Kit] indicator is on and the [Error] indicator flashes – The installed toner cartridge is incompatible. Please install a new toner cartridge that is designed for use in your Lexmark E332 Laser Printer.
White lines appear
Streaked horizontal lines
Streaked vertical lines
Insufficient toner darkness
Print density is too high
Toner specks
Background shading
Uneven print density
Ghosting
Blank pages
How to Install a Toner Cartridge in the Lexmark E332 Laser Printer
Initially, you must press the release button located on the left side of your Lexmark E332 Laser Printer, and then open the front cover. After that, you must unlock the exhausted toner cartridge by pressing the button located on the front side of the drum unit, and then pull the exhausted component carefully out of the laser printer. Now, you must remove the packing material from the new toner cartridge, and then redistribute the toner by shaking the new component several times from side to side. In the next step of the replacement procedure, you must align the new toner cartridge with the drum unit, and then insert it until it locks into place. Finally, you must close the front cover of your Lexmark E332 Laser Printer.
When do I Replace an Engine Controller Board in the Lexmark E332 Laser Printer?
You should replace the engine controller board if any of the listed errors appears. Please check the engine controller board for correct installation and connection before replacing it.
Error code [955], [956], [957], [958], or [959] – The secure NVRAM on the engine controller board is defective. Please replace the engine controller board.
Error code [970], [971], [972], [973], [974], [975], [976], [978], or [979] – The Lexmark E332 Laser Printer has detected an error in the network circuitry. You must replace the engine controller board.
Error code [980], [981], [982], [983], or [984] – These error codes indicate communication error with Tray 2. You should remove Tray 2 from the machine, and then reinsert it. Please replace Tray 2 if the problem persists. You will have to replace the engine controller board if the same error appears again.
All operator panel lights are dim and operate erratically during POST
How to Install an Engine Controller Board in the Lexmark E332 Laser Printer
Important: Please handle the engine controller board by the edges, and always touch a ground before touching the board.
Initially, you must switch the Lexmark E332 Laser Printer off, and then open the right cover. Next, you must remove the two screws from the metal cover of the engine controller board, and then remove the metal cover. After that, you must unplug all cables from the engine controller board, and then remove the three screws securing the USB and parallel ports. Now, you must remove the five mounting screws from the engine controller board, and then lift the engine controller board out of the Lexmark E332 Laser Printer. In the next step of the replacement procedure, you must unpack the new engine controller board, and then install it by executing the current procedure in reverse order. Finally, you must match the ID of the machine to the ID of the new engine controller board by executing the short procedure included below.
1. Make sure that the Lexmark E332 Laser Printer is switched off
2. Open the front cover of the machine
3. Press the [Power] and [Continue] buttons simultaneously
4. Wait until the [!] LED lights up, and then close the front cover
5. Select [Development] – [Configuration ID]
When do I Replace a Fuser Assembly Unit in the Lexmark E332 Laser Printer?
One of the listed print quality problems will appear when the installed fuser assembly unit reaches the end of its useful life.
Paper curls; Wrinkles; Paper stacks poorly; - The installed fuser assembly unit operates at temperature exceeding the requirements of the printed media. The fuser backup roller is probably exhausted. You should replace the installed fuser assembly unit with a new one.
Toner on back of page – The hot and backup rollers of the installed fuser assembly unit are exhausted. Please install a new fuser assembly unit.
Toner rubs off the page – This is an indication for insufficient fusing. You should replace the installed fuser assembly unit with a new one.
How to Install a Fuser Assembly Unit in the Lexmark E332 Laser Printer
In the first step of the replacement procedure, you have to open the front cover of the Lexmark E332 Laser Printer to gain access to the screw and the latches of the left side cover. Then, you must remove the mounting screw of the left side cover. After that, you must open the rear door, and then release the two latches of the left side cover. Now, you must remove the left side cover from the main unit, and then detach the right side cover. Once the left side cover and the right side cover are removed, you must open the rear door, and then remove its mounting screws. In the next step of the replacement procedure, you must remove the rear cover by unhooking it from the main frame, and then remove the three screws securing the paper exit guide. After that, you must remove the paper exit guide from the machine, and then remove the two screws located on the lower corners of the exhausted fuser assembly unit. Next, you must detach the controller card cover by removing the two screws, and then unplug the connectors of the thermistor and the exit sensor from the controller card. Now, you must slide the exhausted fuser assembly unit slightly towards you, unplug the fuser AC cable, and then remove the exhausted component from the Lexmark E332 Laser Printer. Finally, you must unpack the new fuser assembly unit, and then install it by executing the current procedure in reverse order.
When do I Replace an Operator Panel Assembly in the Lexmark E332 Laser Printer?
You should replace the operator panel assembly if any of the listed errors appears. Please check the operator panel assembly for correct installation and connection before replacing it.
Error code [950], [951], [952], [953], or [954] – The NVRAM of the operator panel circuit board is defective. Please replace the operator panel assembly.
One or more lights/LEDs do not come on during POST
None of the lights come on
One or both operator panel buttons are not responding
An individual light stays on during POST
How to Install an Operator Panel Assembly in the Lexmark E332 Laser Printer
To replace the operator panel assembly of your Lexmark E332 Laser Printer, you must open the front cover, and then open the right cover of the main unit. After that, you must remove the cover of the controller card, and then unplug the connector of the operator panel assembly from the controller card. Now, you must remove the two screws securing the operator panel assembly to the printer frame, and then remove the operator panel assembly from the Lexmark E332 Laser Printer. Finally, you must unpack the new operator panel assembly, and then install it by executing the current procedure in reverse order.
When do I Replace a Transfer Roller in the Lexmark E332 Laser Printer?
You should replace the transfer roller when/if any of the listed indications and print quality problems appears.
The error code [917] is displayed; The [Continue] LED and the [Error] indicator flash (secondary light pattern); - The Lexmark E332 Laser Printer has detected a transfer roller related error. You should reinstall the transfer roller, and then test the laser printer. Please replace the installed transfer roller if the problem persists.
Variation in image density horizontally across the page – You should try to improve print quality by replacing the drum unit. Please replace the transfer roller if print quality does not improve.
Insufficient toner darkness/density – You must make sure that the toner cartridge and the drum unit are installed correctly. You should also check the toner level, and replace the toner cartridge if necessary. If the prints remain faint after you have installed a new toner cartridge, you should replace the drum unit, and then test the Lexmark E332 Laser Printer. Please replace the transfer roller if print quality does not improve.
How to Install a Transfer Roller in the Lexmark E332 Laser Printer
In the initial step of the replacement procedure, you must open the front cover of the laser printer, and then unlatch the right holder of the exhausted transfer roller. After that, you must unlatch the left holder, and then lift the exhausted transfer roller out of the Lexmark E332 Laser Printer. Now, you must make sure that the springs are inserted into the bearings of the slot, and then unpack the new transfer roller. In the next step of the replacement procedure, you must insert the left holder of the new transfer roller against the spring on the left side of the slot, and then insert the right holder of the new component. Finally, you must close the front cover of your Lexmark E332 Laser Printer.
LEXMARK E332 TONER CARTRIDGE
Lexmark E332 Toner Cartridge - 35,000 Pages
  OVER 50
IN STOCK NOW

Price:  $82.89
LEXMARK E332 TONER CARTRIDGE
Lexmark E332 Toner Cartridge (OEM) 2,500 Pages
Lexmark 10 IN STOCK NOW

Price:  $114.89
LEXMARK E332 DRUM
Lexmark E332 Drum Unit/Photoconductor Kit - Prints 20000 Pages
  OVER 50
IN STOCK NOW

Price:  $34.89
LEXMARK E332 DRUM
Lexmark E332 Drum Unit/Photoconductor Kit (made by Lexmark)
Lexmark 23 IN STOCK NOW

Price:  $95.89
LEXMARK E332 TONER FOR PRINTING CHECKS
Lexmark E332 MICR Toner Cartridge For Printing Checks - 6,000 Pages
  OVER 50
IN STOCK NOW

Price:  $65.89
LEXMARK E332 FUSER ASSEMBLY UNIT
Lexmark E332 Fuser Assembly Unit
 

Price:  $119.89
E332 PAPER CASSETTE
Lexmark E332 Paper Cassette (OEM) 250 Sheets
Lexmark

Price:  $35.89
E332 CONTROLLER BOARD
Lexmark E332 Controller Board
 

Price:  $174.89
LEXMARK E332 SENSOR ASSEMBLY
Lexmark E332 Exit Sensor Assembly (OEM)
Lexmark

Price:  $15.89
E332 OPERATOR PANEL
Lexmark E332 Operator Panel Assembly (OEM)
Lexmark

Price:  $18.89
E332 DOOR FUSER IDLE GEAR
Lexmark E332 Link CBM - Door Fuser Idle Gear (OEM)
Lexmark

Price:  $4.89
E332 PICK ARM ASSEMBLY
Lexmark E332 Pick Arm Assembly (OEM)
Lexmark

Price:  $23.89
E332 CARD ASSEMBLY SDRAM MEMORY DIMM
Lexmark E332 Card Assembly SDRAM Memory DIMM (OEM) 16MB
Lexmark

Price:  $193.89
E332 MANUAL FEED CLUTCH
Lexmark E332 Manual Feed Clutch CBM (OEM)
Lexmark

Price:  $4.89
LEXMARK E332 TRANSFER ROLLER
Lexmark E332 Transfer Roller (OEM)
Lexmark

Price:  $38.89
E332 POWER SUPPLY BOARD
Lexmark E332 Power Supply (OEM)
Lexmark

Price:  $156.89
E332 ACM FRONT DOOR SPRINGS
Lexmark E332 ACM Front Door Springs (OEM)
Lexmark

Price:  $2.89
E332 ENGINE CONTROLLER BOARD
Lexmark E332 Engine Controller Board (OEM)
Lexmark

Price:  $220.89
E332 EXIT SENSING FLAG
Lexmark E332 Exit Sensing Flag (OEM)
Lexmark

Price:  $4.89

About My Lexmark E332tn Laser Printer

Pages Per Minute
Cost of Consumables
Printer Resolution
Based Off 1659 Similar Printers


Lexmark E332 Printer Review


Overview:

The Lexmark E332 is an affordable laser printer designed for the small office environment. Toner cartridges for this unit yield around 6,000 pages and as a result you have to change them less often. Unfortunately this unit lacks color printing.


Pros:

This unit features an outstanding processor and has good paper capacity. Users can connect it with either a Parallel port or a USB. Additionally the Lexmark E332 features a built in Ethernet port that will allow you to share the printing across your network.
Toner cartridges for this unit yield 2,500 pages with high yield cartridges yielding 6,000 pages. This unit also comes with a toner saver mode which will decrease your overall printing cost. Toner for the Lexmark E322 is extremely affordable.
Output speed with this model is decent at 21 pages per minute. Text quality is good and smaller fonts are easily readable. However if you are doing a lot of graphics, you should consider purchasing another printer.
The Lexmark E332 offers quality printing at affordable prices. It is affordable to purchase and operate. Best of all the cost of maintaining this printer is extremely low.


Cons:

The paper capacity of the Lexmark E322 is rather limited. The standard version only holds 250 sheets. Another shortcoming of this unit is that it does not print in color. Most people wish to print in color sometimes.



 
Sign Up and Save To Get Exclusive Offers!  

Home | About Us | Search | My Account | CUSTOMER SUPPORT | Blog

Copyright © 2005-2016. QuikShip California.

View our Privacy Policy / Conditions of Use

 

TradeMark Disclosure: QuikShip Toner is a registered US Trademark. 3D Printing, Airwolf, Amano, Apple, Brother, Canon, Casio, Citizen, Copystar, Danka/Infotec, DEC, Dell, Epson, Fujitsu, Gestetner, Hasler, Hitachi, HP, IBM, KIP, Kodak, Konica Minolta, Kyocera Mita, Lanier, Lexmark, MakerBot, Muratec, Nashuatec, NEC, Neopost, OkiData, Olivetti, Panasonic, Pitney Bowes, Printek, Printronix, RepRap, Rex Rotary, Ricoh, Risograph, Samsung, Savin, Sharp, Smith Corona, Star Micronics, Tally Genicom, Texas Instruments, Toshiba, Underwood, Unisys, Xerox, Zebra and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by quikshiptoner.com. Any use of a brand name or model designation for a non-OEM cartridge is made solely for purposes of demonstrating compatibility, and unless noted as OEM, All products listed on this site is are non-OEM.

 

 

Popular Ink & Toner