In an effort to provide low-cost, Quick shipping we ship from 5 warehouses throughout the US.

3:30PM PST from California

3:30PM CST from Illinois

3:30PM CST from Texas

3:30PM EST from MA

3:30PM EST from Georgia

Since 2007 ... We stand behind our Non-OEM products, manufactured under ISO 9001 certifications. 100% satisfaction or you may return your purchase to us within 6 months of purchase for a replacement or exchange, free of charge. OEM Products come with a manufacturer warranty only.

Reviews by You! Read what our customers say, click here

Shopping Cart: 0 items

2 Products for the Lexmark Optra E Laser Printer

You Are Here: > Top > Lexmark > Lexmark Black & White > Optra E

OPTRA E TONER CARTRIDGE

Lexmark Optra E/E+/EP/ES Toner Cartridge - 3,000 Pages

Price: $46.89

864613

Product Description

Toner Cartridge for Lexmark Optra E/E+/EP/ES Laser Printer

This toner cartridge prints 3000 pages with average 5% coverage (Nearly all Printer manufacturers base their ink/toner cartridge yields on 5% page coverage).

This product comes with a 6 month Warranty against any defects (including free replacement). We stand behind our products 100%, as these are not manufactured by Lexmark.

Why toner? Why not call it ink? Regular ink dries quickly, which is why cartridges for inkjet printers do not last long. Laser Printers use toner, which is ink in the form of powder. A sealed toner cartridge can be stored for 2+ years prior to usage.

Product Manuals

When do I Replace a Fuser Assembly in the Lexmark Optra E

You should replace the fuser assembly installed in your Lexmark Optra E if any of the listed indications persists.

� The second (top – bottom) indicator on the control panel is lit

� The components of the installed fuser assembly are melted

� Loose toner

� Repetitive image defects appear at intervals of 2.2323 in

� Repetitive image defects appear at intervals of 2.7205 in

How to Install a Fuser Assembly in the Lexmark Optra E

In the first step of the replacement procedure, you must open the face up cover, and then detach it from the Lexmark Optra E. After that, you must open the front cover, and then remove the fixing screws from the support straps of the cover. Now, you must remove the front cover, and then remove the three fixing screws of the rear cover. In the next step, you must remove the rear cover by releasing its retaining tabs, and then detach the top cover by removing the two mounting screws. Once the top cover is removed, you must remove the fixing screws of the side covers, and then remove the side covers by releasing their tabs. Next, you must remove the mounting screw of the wire cover, and then remove the mounting screws of the fuser lamp. After that, you must unplug the fuser connector from the LVPS, and then remove the mounting screws of the exhausted fuser assembly. Now, you must release the two snaps, and then remove the exhausted fuser assembly from the Lexmark Optra E. Finally, you must unpack the new fuser assembly, and then install it by executing the current procedure in reverse order.

How to Install an HVPS in the Lexmark Optra E

In the first step of the replacement procedure, you must switch your Lexmark Optra E off, and then unplug the power cord. After that, you must remove all covers from the main unit, and then remove the mounting screws from the HVPS board. Now, you must unplug the cables from the top connectors of the HVPS, and then unplug the cable from the lower HVPS connector. Finally, you must remove the HVPS from the Lexmark Optra E, and then install the replacement component by executing the current procedure in reverse order.

When do I Replace a Printhead Assembly in the Lexmark Optra E

You should replace the printhead assembly installed in your Lexmark Optra E if any of the listed indications persists.

� The third (top – bottom) LED on the control panel is on

� The first two LEDs on the control panel are on

� Blank printouts

How to Install a Printhead Assembly in the Lexmark Optra E

Initially, you must switch your Lexmark Optra E off, and then unplug the power cord. After that, you must remove the front cover and the face up cover, and then detach the top cover by removing its mounting screws. Now, you must unplug the printhead connectors, and then remove the mounting screws from the printhead assembly. Finally, you must remove the printhead assembly, and then install the replacement component by executing the current procedure in reverse order.

When do I Replace a Transfer Roll in the Lexmark Optra E

The transfer roll installed in your Lexmark Optra E should be replaced if any of the listed indications persists.

� Paper stacks poorly or curls

� Image density variations

� Image defects appearing at intervals of 1.8110 in

� Toner on back of page

How to Install a Transfer Roll in the Lexmark Optra E

You must switch your Lexmark Optra E off, and then unplug the power cord. After that, you must remove the front cover, the face up cover, and the black cover of the transfer roll. Now, you must release the exhausted transfer roll by pressing its latches, and then remove the exhausted component. Finally, you must install the replacement component by executing the current procedure in reverse order.

View our Privacy Policy / Conditions of Use

Session ID: QS-87364

TradeMark Disclosure: QuikShip Toner is a registered US Trademark. Brother, Canon, Casio, Copystar, Dell, Epson, Gestetner, HP, IBM, Kodak, Konica Minolta, Kyocera Mita, Lanier, Lexmark, Muratec, Neopost, OkiData, Olivetti, Panasonic, Pitney Bowes, Ricoh, Risograph, Samsung, Savin, Sharp, Smith Corona, Tally Genicom, Toshiba, Xerox and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by quikshiptoner.com. Any use of a brand name or model designation for a non-OEM cartridge is made solely for purposes of demonstrating compatibility, and unless noted as OEM, All products listed on this site is are non-OEM.