support
 
In an effort to provide low-cost Quick shipping, We ship from 5 warehouses throughout the US.

3:30PM PST from California
3:30PM CST from Illinois
3:30PM CST from Texas
3:30PM EST from MA
3:30PM EST from Georgia.

 
 
Since 2007 ... We stand behind our Non-OEM products, manufactured under ISO 9001 certifications. 100% satisfaction or you may return your purchase to us within 6 months of purchase for a replacement or exchange, free of charge. OEM Products come with a manufacturer warranty only.
 
3D Printing (12)
Airwolf (24)
Amano (68)
Apple (78)
Brother (12971)
Canon (15383)
Casio (630)
Citizen (250)
Copystar (786)
Danka/Infotec (48)
DEC (25)
Dell (1755)
Epson (4264)
Fujitsu (22)
Gestetner (1537)
Hasler (26)
Hitachi (15)
HP (37216)
IBM (1518)
KIP (36)
Kodak (171)
Konica Minolta (4300)
Kyocera Mita (2335)
Lanier (1820)
Lexmark (9112)
MakerBot (48)
Muratec (234)
Nashuatec (74)
NEC (155)
Neopost (34)
OkiData (4570)
Olivetti (221)
Panasonic (1602)
Pitney Bowes (981)
Printek (11)
Printronix (243)
RepRap (24)
Rex Rotary (28)
Ricoh (4492)
Risograph (340)
Samsung (6008)
Savin (1761)
Sharp (4547)
Smith Corona (886)
Star Micronics (322)
Tally Genicom (378)
Texas Instruments (139)
Toshiba (1499)
Underwood (15)
Unisys (24)
Xerox (7383)
Zebra (44)
78 Products for the Lexmark X642e Printer
You Are Here: >  Top >  Lexmark >  "X" Series >  X642e

LEXMARK X642E TONER CARTRIDGE

Lexmark X642e Toner Cartridge - Prints 32000 Pages
  39 IN STOCK NOW

Price:  $95.89
Product Description
Lexmark X642e TONER - 32,000 Pages

This Toner Cartridge prints 32000 pages with an average 5% page coverage. The amount of pages can vary depending upon the amount of ink printed onto each page. (5% page coverage is a standard Lexmark specification)


This product comes with a 6 month Warranty against any defects (including free replacement). We stand behind our products 100%, as these are not manufactured by Lexmark.

Why toner? Why not call it ink? Regular ink dries quickly, which is why cartridges for inkjet printers do not last long. Laser Printers use toner, which is ink in the form of powder. A sealed toner cartridge can be stored for 2+ years prior to usage.


Product Manuals
When do I Replace a Toner Cartridge in the Lexmark X642e Printer?
You can obtain information about the type and the status of the installed toner cartridge by printing a Menu Settings Page.
The installed toner cartridge should be replaced when/if any of the listed status messages, attendance messages, and print quality problems appears.
The message [Toner Low] is displayed – The installed toner cartridge is nearing end of life. You should order a new toner cartridge. Please be aware that print quality may decrease when the toner level is low.
The message [Close door or insert cartridge] is displayed – You should open and close the upper front cover. If the message is still displayed, you should try to solve the problem by reinstalling the toner cartridge. Please install a new toner cartridge if the problem persists.
The message [30.yy Invalid refill, change cartridge] is displayed – You have installed an invalid toner cartridge. Please install a new toner cartridge.
The message [31.yy Replace defective print cartridge] is displayed – The Lexmark X642e Printer has detected a hardware problem. You must replace the installed toner cartridge with a new one to resume printing/copying.
The message [32.yy Replace unsupported print cartridge] is displayed – The installed toner cartridge is not intended for use in your Lexmark X642e Printer. Please install a new supported toner cartridge.
The message [42.xy Cartridge region mismatch] is displayed – The toner cartridge region differs from the printer region. You should install a new toner cartridge that has a proper region.
Printouts are too light
Toner fog
Blank printouts
Vertical black streaks
Residual images
How to Install a Toner Cartridge in the Lexmark X642e Printer
In the first step of the replacement procedure, you must press the release latch of the multipurpose feeder, and then lower the multipurpose feeder. After that, you must open the top front cover, and then lift the used toner cartridge slightly up to release it from the slot. Now, you must pull the used toner cartridge out of the Lexmark X642e Printer, and then take the replacement component out of the package. In the next step of the replacement procedure, you must remove the transport spacers from the new toner cartridge, and then shake the cartridge several times from side to side. Once the new toner cartridge is prepared, you must slide it along the guides of the slot, and then push it gently down to ensure proper contact. Finally, you must close the top front cover, and then close the multipurpose feeder.
How to Install an ADF CCD Module Assembly in the Lexmark X642e Printer
Initially, you must switch the Lexmark X642e Printer off, and then unplug the power cord. Next, you must disconnect the data cable of the ADF assembly from the main unit, and then remove the ADF mounting screws. After that, you must remove the ADF assembly by detaching it from the hinges, and then open the ADF top cover. Now, you must remove the two screws securing the ADF top cover, and then remove the ADF top cover by releasing the two latches. Once the ADF top cover is removed, you must open the document cover, and then peel the Velcro pad (flatbed cushion) off. In the next step of the replacement procedure, you must carefully turn the ADF assembly upside down, and then open the lower exit-guide assembly. After that, you must remove the six screws securing the ADF CCD module assembly, and then remove the ADF jam tray sensor. Next, you must unplug the ADF CCD cable, and then remove the ADF CCD module assembly from the Lexmark X642e Printer. Finally, you must unpack the new ADF CCD module assembly, and then install it by executing the current procedure in reverse order.
How to Install a Flatbed CCD Module Assembly in the Lexmark X642e Printer
In order to replace the Flatbed CCD Module Assembly, you must remove the following components from the Lexmark X642e Printer:
1. Scanner flatbed glass holder assembly
2. Upper glass holder
3. Flatbed contact glass
4. Scan cover
5. Scanner right side cover
6. Scanner left side cover
All removal procedures and the replacement procedures are listed below.
Scanner Flatbed Glass Holder Assembly Removal
You must open the document cover, and then remove the two mounting screws of the scanner flatbed glass-holder assembly. Please do not touch the calibration strip. After that, you must pry up the inner side of the assembly by pulling it carefully up, and then release the three tabs. Finally, you must take the scanner flatbed glass-holder assembly and place it on a clean, dry cloth.
Upper Glass Holder Removal
You must slide the upper glass holder to the left, and then remove it by pulling it up.
Flatbed Contact Glass Removal
You must slide the flatbed contact glass to the left, and then lift it. Please place the flatbed contact glass on a clean, dry cloth.
Scan Cover Removal
You must remove the three screws securing the scan cover, and then lift the cover.
Scanner Right Side Cover Removal
You must remove the mounting screw, and then remove the scanner right side cover by sliding it back.
Scanner Left Side Cover Removal
You must remove the two mounting screws, and then remove the scanner left side cover by releasing its latches.
Flatbed CCD Module Assembly Replacement
To replace the flatbed CCD module assembly, you must loosen the CCD belt by pushing the tension spring, and then unhook the belt from the motor shaft. After that, you must slide the flatbed CCD module assembly to the left as far as it will go, and then unhook the main CCD guide shafts. Now, you must unplug the flatbed CCD ribbon cable from the flatbed CCD module, and then disconnect the CCD belt from the retainer. In the next step of the replacement procedure, you must remove the flatbed CCD module assembly from the Lexmark X642e Printer, and then unpack the replacement component. Finally, you must install the new flatbed CCD module assembly by executing the current procedure in reverse order.
When do I Replace a Main Fan in the Lexmark X642e Printer?
The Lexmark X642e Printer will display one of the listed error codes if it detects a main fan-related abnormality.
[927.00] – You must make sure that the fan connector is properly inserted, and then check the fan blades for external blockage. Please install a new main fan if the same error appears again.
[927.01] – The main fan has stalled. You should check the main fan for external blockages. Please replace the main fan if the problem persists.
[927.03] – The installed main fan is defective. Please install a new main fan.
How to Install a Main Fan in the Lexmark X642e Printer
In the initial step of the replacement procedure, you must switch the printer off, and then loosen the two thumbscrews of the ADF data cable. Next, you must disconnect the ADF data cable from the main unit, and then remove the ADF mounting screws. After that, you must remove the ADF assembly from the Lexmark X642e Printer, open the upper and lower front covers, and then press the two latches of the left door. Now, you must open the left door, release its top hinge, and then remove the door by releasing it from the bottom pin. Once the left door is removed, you must remove the two mounting screws from the scanner left side cover, and then remove the cover by sliding it towards the rear side of the machine. In the next step of the replacement procedure, you must remove the flatbed scan assembly from the Lexmark X642e Printer, and then loosen the mounting screws of the outer shield. After that, you must slide the outer shield up to remove it, and then detach the upper plenum by removing the two screws. Next, you must unplug the main fan cable from the J4 connector of the system board, and then remove the main fan from the printer. Finally, you must unpack the new main fan, and then install it by executing the current procedure in reverse order.
When do I Replace an Operator Panel Right Cover Assembly in the Lexmark X642e Printer?
You should replace the operator panel right cover assembly if any of the listed problems and errors appears.
None of the operator panel buttons works
One button does not work
The LCD is blank, the LED is off, and the buttons do not work.
The Lexmark X642e Printer operates normally but the operator panel LED does not come on
The error code [953.00] is displayed
The contrast control does not work properly – You should try to solve the problem by replacing the operator panel left cover assembly. Please replace the operator panel right cover assembly if the problem persists.
The LCD turns on, but it does not work when touched – You must make sure that the 4-pin card cable is correctly attached to the J3 connector of the operator panel. Please replace the operator panel right cover assembly if the problem persists.
How to Install an Operator Panel Right Cover Assembly in the Lexmark X642e Printer
Initially, you must open the upper front cover of your Lexmark X642e Printer, and then remove the two screws from the underside of the operator panel right cover assembly. After that, you must lift the operator panel right cover assembly slightly up, and then disconnect the four cables. Please be careful not to damage the small ribbon cable and its connector. Now, you must remove the operator panel right cover assembly from the main unit, and then unpack the replacement component. In the next step of the replacement procedure, you must connect the four cables to the new operator panel right cover assembly, and then fasten the latches on the top of the new component into the upper front cover hinge locks. After that, you must push the new operator panel right cover assembly down, and then secure the new component with the two screws. Finally, you must close the upper front cover of your Lexmark X642e Printer.
How to Install a Paper Size Sensing Board in the Lexmark X642e Printer
You must start the replacement procedure by opening the upper and lower front covers. Then, you must open the left door of your Lexmark X642e Printer by pressing the two latches. In the next step, you must release the top hinge of the left cover, and then remove the left cover by lifting it. After that, you must loosen the mounting screw of the outer shield, and then slide the outer shield up to remove it from the machine. Now, you must disconnect all cables from the system board, remove all features and options from the interface card, and then remove the six mounting screws from the system board. Next, you must pull the system board together with the inner shield out of the Lexmark X642e Printer, and then remove the mounting screw of the paper size sensing board. After that, you must unlatch the paper size sensing board, and then remove it from the printer. Finally, you must unpack the new paper size sensing board, and then install it by executing the current procedure in reverse order.
When do I Replace a Printhead Assembly in the Lexmark X642e Printer?
The installed printhead assembly should be replaced if any of the listed errors and print quality problems appears.
The error code [936.00] is displayed – The Lexmark X642e Printer has detected that the mirror motor does not reach operational speed. The most common cause for this hardware problem is a defective printhead assembly. Thus, you should replace the installed printhead assembly if the problem persists.
Background print quality problems – You should try to solve the problem by replacing the toner cartridge and loading a different type of paper. Please replace the installed printhead assembly if print quality remains unsatisfactory.
The error code [930.xx] is displayed – You have installed an incompatible printhead assembly. Please install a new printhead assembly that has been designed for use in your Lexmark X642e Printer.
Repetitive paper jams prior to or at the printhead assembly; error code [201.xx];
How to Install a Printhead Assembly in the Lexmark X642e Printer
Please be aware that the printhead is not a serviceable component. The replacement procedure of the printhead assembly includes the complete removal of the following components:
1. ADF assembly
2. Printer left side cover
3. Scanner left side cover
4. Flatbed scan assembly
5. Printer right cover
6. Upper tray cover
7. Upper sub cover
8. Fuser wiper cover assembly
9. Upper cover
The nine removal procedures and the replacement procedure are included separately below.
ADF Assembly
You must disconnect the ADF data cable from the Lexmark X642e Printer, and then remove the ADF mounting screw. Next, you must remove the ADF assembly by lifting it carefully up.
Printer Left Side Cover
You must open the upper and lower front covers, and then open the left door by pressing the two latch buttons. After that, you must remove the left side cover by releasing the top hinge and the pin.
Scanner Left Side Cover
You must remove the two mounting screws, and then slide the scanner left side cover towards the rear to remove it.
Flatbed Scan Assembly
Once the scanner left side cover is removed, you must remove the seven screws securing the SCC and HDD shield, and then loosen the fixing screws of the outer shield. After that, you must slide the outer shield to the left, and then remove the SCC (scanner control card) and HDD (hard disc drive) shield. Now, you must disconnect the two cables, and then remove the two screws from the left side. In the next step, you must detach the ground bracket (if available) from the SCC and HDD shield by removing the two fixing screws, and then remove the right side cover of the scanner. After that, you must remove the two screws from the right side of the scanner, and then remove the scanner unit by unhooking it from the Lexmark X642e Printer.
Upper Sub-Cover
You must remove the screw from the right side of the frame that holds the upper sub cover, and then detach the right side of the upper sub cover from the frame. After that, you must remove the upper sub cover by sliding it to the right.
Printer Right Cover
Initially, you must open the upper and lower front covers, and then remove the toner cartridge from the Lexmark X642e Printer. Next, you must remove the mounting screw of the right front cover, and then remove the redrive door. After that, you must remove the mounting screw from the right rear cover, and then remove the mounting screws of the redrive. Now, you must press the two latches and pull the redrive assembly out of the printer. In the next step, you must unlatch the front side of the right cover, and then release the three cover retainers at the bottom to remove the right cover.
Upper Tray Cover
You must raise the upper tray cover, and then remove it by releasing its latches.
Fuser Wiper Cover Assembly
You must squeeze the two latches located on the top side of the fuser wiper cover assembly, and then pull up to remove the fuser wiper cover assembly.
Upper Cover
In the first step, you must detach the upper plenum by removing the two screws, and then remove the two screws securing the right side of the upper cover to the main frame. After that, you must remove the four mounting screws from the top side of the upper cover, and then remove the screw from the shield. Now, you must remove the upper cover by releasing the front right and front left cover posts.
Printhead Assembly Replacement
Once the upper cover is removed, you must unplug the printhead cable from the printhead assembly, and then remove the four mounting screws from the printhead assembly. After that, you must pull the exhausted printhead assembly out of the Lexmark X642e Printer, and then unpack the replacement component. Now, you must install the new printhead assembly by executing the current procedure in reverse order, but please leave the top mounting screw loose to allow the printhead assembly to move from side to side within the slots, and then reinstall all previously removed components. In the next step of the replacement procedure, you must press and hold the [3] and [6] buttons simultaneously, and switch the Lexmark X642e Printer on. After that, you must load A4 paper in tray 1, and then select [Registration] – [Quick Test Page]. Once the test page is printed, you should use it to adjust the position of the printhead (adjust the left or right mounting screws of the printhead assembly), and then tighten all four mounting screws of the new printhead assembly. Finally, you must close all printer covers, and then print 5-10 pages.
How to Install an Upper Entrance Guide Assembly in the Lexmark X642e Printer
In the initial step of the replacement procedure, you must switch the Lexmark X642e Printer off, unplug the power cord, and then remove ADF pickup assembly by sliding it to the right. Next, you must open the ADF top cover, and then remove the two screws securing the ADF front cover. After that, you must remove the ADF front cover by releasing its latches, and then remove the three mounting screws of the ADF rear cover. Now, you must remove the cable blocks from the notches, and then remove the ADF rear cover from the main unit. Once the ADF rear cover is removed, you must remove the two screws that fix the document tray assembly to the main unit, and then remove the document tray assembly. In the next step of the replacement procedure, you must remove the three screws securing the upper entrance guide assembly, and then pull the upper entrance guide assembly out of the Lexmark X642e Printer. Finally, you must unpack the new upper entrance guide assembly, and then install it by executing the current procedure in reverse order.
LEXMARK X642E TONER CARTRIDGE
Lexmark X642e Toner Cartridge (OEM, Made by Lexmark) 10000 Pages
Lexmark 38 IN STOCK NOW

Price:  $478.89
LEXMARK X642E PRINTHEAD ASSEMBLY
Lexmark X642e Printhead Assembly
 

Price:  $144.89
LEXMARK X642E TONER FOR PRINTING CHECKS
Lexmark X642e MICR Toner Cartridge For Printing Checks - 32,000 Pages
  OVER 50
IN STOCK NOW

Price:  $117.89
LEXMARK X642E FUSER ASSEMBLY UNIT
Lexmark X642e Fuser Assembly Unit - 115V
 

Price:  $126.89
LEXMARK X642E FUSER MAINTENANCE KIT
Lexmark X642e Fuser Maintenance Kit - 300000 Pages
  44 IN STOCK NOW

Price:  $141.89
LEXMARK X642E SUB COMPONENTS MAINTENANCE KIT
Lexmark X642e Sub Components Maintenance Kit
  10 IN STOCK NOW

Price:  $35.89
LEXMARK X642E FUSER MAINTENANCE KIT
Lexmark X642 Fuser Maintenance Kit (OEM) 300000 Pages
Lexmark 10 IN STOCK NOW

Price:  $336.89
LEXMARK X642E FUSER ASSEMBLY UNIT
Lexmark X642e Fuser Assembly Unit (OEM)
Lexmark 15 IN STOCK NOW

Price:  $253.89
X642E FUSER KIT 220V
Lexmark X642e 220V Fuser Maintenance Kit (OEM) 300000 Pages
Lexmark

Price:  $474.89
X642E PAPER TRAY
Lexmark X642e Paper Tray - 250 Sheets
 

Price:  $141.89
X642E AUTO DUPLEX UNIT
Lexmark X642e Auto Duplex Unit (OEM)
Lexmark

Price:  $339.89
X642E SHEET DRAWER WITH MEDIA TRAY
Lexmark X642e Sheet Drawer with Media Tray (OEM) 500 Sheets
Lexmark

Price:  $311.89
X642E SHEET DRAWER
Lexmark X642e Sheet Drawer (OEM) 500 Sheets
Lexmark

Price:  $267.89
LEXMARK X642E TRANSFER ROLLER
Lexmark X642e Transfer Roller
 

Price:  $16.89
X642E ENVELOPE FEEDER
Lexmark X642e Envelope Feeder - 85 Envelopes
 

Price:  $332.89
X642E REDRIVE ASSEMBLY
Lexmark X642e Redrive Assembly - 500 In/500 Out
 

Price:  $70.89
X642E GEAR BOX ASSEMBLY WITH MOTOR
Lexmark X642e Gear Box Assembly with Motor
 

Price:  $90.89
LEXMARK X642E PICK ARM ASSEMBLY
Lexmark X642e Pick Arm Assembly - 500 Sheets
 

Price:  $156.89
LEXMARK X642E PICKUP ROLLER 2PACK
Lexmark X642e Pickup Roller 2Pack
 

Price:  $4.89
X642E FLATBED SCANNER ASSEMBLY
Lexmark X642e Flatbed Scanner Assembly
 

Price:  $519.89
LEXMARK X642E CHARGE ROLLER ASSEMBLY
Lexmark X642e Charge Roller Assembly
  10 IN STOCK NOW

Price:  $26.89
X642E BEVEL GEAR KIT
Lexmark X642e Bevel Gear Kit
 

Price:  $13.89
X642E FUSER WAND COVER
Lexmark X642e Fuser Wand Cover
 

Price:  $7.89
LEXMARK X642E COVER ASSEMBLY
Lexmark X642e Cover Assembly
  10 IN STOCK NOW

Price:  $16.89
LEXMARK X642E TONER CHARGE ROLL KIT
Lexmark X642e Toner Charge Roll Kit (OEM)
Lexmark 42 IN STOCK NOW

Price:  $45.89
LEXMARK X642E TRANSFER ROLLER
Lexmark X642e Transfer Roll (OEM)
Lexmark 11 IN STOCK NOW

Price:  $26.89
LEXMARK X642E POWER TAKEOFF SHAFT
Lexmark X642e Power Takeoff Shaft (OEM)
Lexmark

Price:  $5.89
LEXMARK X642E PICKUP ROLLER 2PACK
Lexmark X642e Pickup Roller 2Pack (OEM)
Lexmark 17 IN STOCK NOW

Price:  $20.89
X642E CRANK SPRING ARM
Lexmark X642e Spring Arm Bellcrank (OEM)
Lexmark

Price:  $13.89
LEXMARK X642E CHARGE ROLLER ASSEMBLY
Lexmark X642e Dual Charge Roll Assembly (OEM) 300,000 Pages
Lexmark 42 IN STOCK NOW

Price:  $45.89
LEXMARK X642E ADF ASSEMBLY
Lexmark X642e ADF Pickup Assembly (OEM)
Lexmark 10 IN STOCK NOW

Price:  $89.89
LEXMARK X642E GUIDE
Lexmark X642e Upper Entrance Guide Kit (OEM)
Lexmark 10 IN STOCK NOW

Price:  $56.89
X642E DEFLECTOR
Lexmark X642e Deflector - Upper Paper Feeder (OEM)
Lexmark

Price:  $5.89
X642E REDRIVE DOOR ASSEMBLY
Lexmark X642e Redrive Door Assembly (OEM) 500 In/500 Out
Lexmark

Price:  $63.89
X642E REDRIVE MOUNTING SCREWS
Lexmark X642e Redrive Screws Parts Pack (OEM)
Lexmark

Price:  $28.89
X642E ADF ASSEMBLY
Lexmark X642e ADF CCD Module Assembly (OEM)
Lexmark

Price:  $320.89
X642E FLATBED CCD MODULE ASSEMBLY
Lexmark X642e Flatbed CCD Module Assembly (OEM)
Lexmark

Price:  $286.89
X642E FLATBED INTERCONNECT CARD ASSEMBLY
Lexmark X642e Flatbed Interconnect Card Assembly (OEM)
Lexmark

Price:  $84.89
X642E MOTOR DRIVER CARD
Lexmark X642e Motor Driver Card (OEM)
Lexmark

Price:  $213.89
X642E FLATBED CCD RIBBON CABLE
Lexmark X642e Flatbed CCD Ribbon Cable (OEM)
Lexmark

Price:  $22.89
X642E MULTIPURPOSE TRAY
Lexmark X642e Multipurpose Tray Assembly (OEM)
Lexmark

Price:  $39.89
X642E OPERATOR PANEL RIGHT COVER ASSEMBLY
Lexmark X642e Operator Panel Right Cover Assembly (OEM)
Lexmark

Price:  $159.89
X642E LCD TOUCHSCREEN INVERTER CARD
Lexmark X642e LCD Touchscreen Inverter Card (OEM)
Lexmark

Price:  $62.89
X642E MODEM CABLE
Lexmark X642e Modem Cable (OEM) 30-pin
Lexmark

Price:  $17.89
X642E LCD RIBBON CABLE
Lexmark X642e LCD Operation Panel Cable (OEM) 32-pin
Lexmark

Price:  $15.89
LEXMARK X642E LVPS/AIO
Lexmark X642e Power Supply: LVPS/AIO (OEM 110V)
Lexmark

Price:  $86.89
X642E LVPS/AIO
Lexmark X642e Power Supply: LVPS/AIO (OEM 220V)
Lexmark

Price:  $115.89
X642E AC ADAPTER/POWER SUPPLY
Lexmark X642e High Voltage Power Supply (OEM)
Lexmark

Price:  $53.89
X642E BOARD ASSEMBLY
Lexmark X642e System Board Assembly (OEM)
Lexmark

Price:  $341.89
X642E DRIVE SHAFT
Lexmark X642e Drive Shaft (OEM) 500 Sheets
Lexmark

Price:  $6.89
X642E DEVELOPER DRIVE ASSEMBLY
Lexmark X642e Developer Drive Assembly (OEM)
Lexmark

Price:  $31.89
X642E FUSER COVER KIT
Lexmark X642e Fuser Cover Kit (OEM)
Lexmark

Price:  $31.89
X642E UPPER FRONT COVER HINGE ASSEMBLY
Lexmark X642e Upper Front Cover Hinge Assembly (OEM)
Lexmark

Price:  $57.89
X642E MP FEEDER LOWER DEFLECTOR ASSEMBLY
Lexmark X642e MP Feeder Lower Deflector Assembly (OEM)
Lexmark

Price:  $30.89
X642E ALIGNMENT ASSEMBLY
Lexmark X642e Alignment Assembly for Paper Feed (OEM)
Lexmark

Price:  $64.89
LEXMARK X642E PICK ARM ASSEMBLY
Lexmark X642e Pick Arm Assembly (OEM) 500 Sheets
Lexmark

Price:  $214.89
LEXMARK X642E SIGNATURE BUTTON FOR CONTACT ASSEMBLY
Lexmark X642e Signature Button for Contact Assembly (OEM)
Lexmark

Price:  $15.89
X642E MAIN FAN WITH CABLE
Lexmark X642e Main Fan with Cable (OEM) 500 Sheets
Lexmark

Price:  $39.89
X642E SPRING
Lexmark X642e Power Takeoff Shaft Spring (OEM)
Lexmark

Price:  $1.89
LEXMARK X642E PARTS PACKET WITH SHAFT & GEAR
Lexmark X642e Parts Packet with Shaft & Gear (OEM)
Lexmark

Price:  $15.89
X642E RIGHT HAND ARM CHANGE
Lexmark X642e Right Hand Arm Change (OEM)
Lexmark

Price:  $9.89
X642E TRANSFER ROLLER RIGHT ARM ASSEMBLY
Lexmark X642e Transfer Roller Right Arm Assembly (OEM)
Lexmark

Price:  $2.89
X642E LEFT ARM ASSEMBLY FOR TRANSFER ROLLER
Lexmark X642e Left Arm Assembly for Transfer Roller (OEM)
Lexmark

Price:  $4.89
X642E CASSETTE WEAR STRIP
Lexmark X642e Cassette Wear Strip (OEM)
Lexmark

Price:  $12.89
X642E BASE ASSEMBLY
Lexmark X642e Base Assembly (OEM)
Lexmark

Price:  $329.89
X642E SENSOR ASSEMBLY
Lexmark X642e Sensor Assembly for Toner (OEM)
Lexmark

Price:  $17.89
X642E PAPER SIZE SENSING BOARD ASSEMBLY
Lexmark X642e Paper Size Sensing Board Assembly (OEM)
Lexmark

Price:  $8.89
X642E STANDARD BIN LEVEL SENSOR
Lexmark X642e Standard Bin Level Sensor (OEM)
Lexmark

Price:  $4.89
X642E HIGH VOLTAGE CONTACT KIT
Lexmark X642e High Voltage Contact Kit (OEM)
Lexmark

Price:  $77.89
X642E PAPER OUT ARM
Lexmark X642e Paper Out Arm (OEM) 500 Sheets
Lexmark

Price:  $61.89
X642E SWITCH SPRING
Lexmark X642e Actuator Switch Spring (OEM)
Lexmark

Price:  $15.89
X642E POWER TAKE OFF SPRING
Lexmark X642e Power Take Off Spring (OEM)
Lexmark

Price:  $11.89
X642E UPPER REDRIVE DEFLECTOR
Lexmark X642e Upper Redrive Deflector (OEM)
Lexmark

Price:  $8.89
X642E INPUT SENSOR
Lexmark X642e Input Sensor (OEM)
Lexmark

Price:  $16.89
LEXMARK X642E PICKUP ROLL ASSEMBLY
Lexmark X642e Pickup Roll Assembly (OEM)
Lexmark

Price:  $27.89
X642E PICK ARM ASSEMBLY
Lexmark X642e Multipurpose Feeder Pick Arm Assembly (OEM)
Lexmark

Price:  $23.89
X642E TRAY COVER
Lexmark X642e Upper Tray Cover (OEM)
Lexmark

Price:  $35.89

About My Lexmark X642E Multifunction Printer

Pages Per Minute
Cost of Consumables
Printer Resolution
Based Off 2504 Similar Printers


Lexmark X642e Printer Review


Overview:

The Lexmark X642e is an outstanding choice for any business, especially if you need to quickly print copies in the morning. The first print is out in just eight seconds. With print speeds of 45 pages per minute you can get a lot done with the Lexmark X642. It is ready to meet the needs of any business thanks to its 200,000 page monthly duty cycle.


Pros:

The Lexmark X642e can scan, print copy, and fax. Plus it packs networking features that are easy to use. Print quality is outstanding. Color images and photos are bright and show no signs of dithering. Using its copy features you can reduce duplicates to a minimum of 25% and enlarge them to a maximum of 400%.
High yield toner cartridges are available for the Lexmark X642e and yield 21,000 pages. The cartridge that comes with the printer yields 10,000 sheets. One advantage of these high yield cartridges is that they don’t need to be replaced as often. This saves you time and money.
The unit's scanner offers outstanding scans with a resolution of 600x600 dpi. Its flatbed scan area supports paper with a maximum size of 8.5x14 inches. With this unit you get a 100-sheet multipurpose tray and can handle A4, A5, executive, folio, legal letter, statement and universal paper sizes.
This unit is well built and requires little maintenance. While owning this machine you will be overjoyed with how little maintenance it requires.


Cons:

The only shortcoming of the Lexmark X642e is its limited paper handling capacity. Additionally, it seems to jam about twice every week which can be a pain to deal with.



 
Sign Up and Save To Get Exclusive Offers!  

Home | About Us | Search | My Account | CUSTOMER SUPPORT | Blog

Copyright © 2005-2016. QuikShip California.

View our Privacy Policy / Conditions of Use

 

TradeMark Disclosure: QuikShip Toner is a registered US Trademark. 3D Printing, Airwolf, Amano, Apple, Brother, Canon, Casio, Citizen, Copystar, Danka/Infotec, DEC, Dell, Epson, Fujitsu, Gestetner, Hasler, Hitachi, HP, IBM, KIP, Kodak, Konica Minolta, Kyocera Mita, Lanier, Lexmark, MakerBot, Muratec, Nashuatec, NEC, Neopost, OkiData, Olivetti, Panasonic, Pitney Bowes, Printek, Printronix, RepRap, Rex Rotary, Ricoh, Risograph, Samsung, Savin, Sharp, Smith Corona, Star Micronics, Tally Genicom, Texas Instruments, Toshiba, Underwood, Unisys, Xerox, Zebra and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by quikshiptoner.com. Any use of a brand name or model designation for a non-OEM cartridge is made solely for purposes of demonstrating compatibility, and unless noted as OEM, All products listed on this site is are non-OEM.

 

 

Popular Ink & Toner