SHARP MX-C401 BLACK TONER CARTRIDGE

The Sharp MX-C401 Color Laser Multifunctional System is equipped with four toner cartridges, and each cartridge is limited to a certain number of printed copies, before it is completely exhausted. When any of the installed toner cartridges is running out of toner, the built-in toner monitoring system will warn you with the following message ``[COLOR]CHANGE THE TONER CARTRIDGE``, where [COLOR] will be replaced with the color of the exhausted toner cartridge (e.g. [Y]:YELLOW TONER CARTRIDGE; [M]:MAGENTA TONER CARTRIDGE; etc…). You must replace the exhausted toner cartridge in the above situation. However, if you decide to continue using the system with the nearly empty toner cartridge, you will see the following message ‘’! Change the toner cartridge [COLOR]’’ very soon, and all printing operations will be suspended/blocked. Herein, you must purchase a new toner cartridge and replace the old/exhausted one.

Initially, you must open the front cover of your Sharp MX-C401 Color Laser Multifunctional System. Behind the cover, you will see all toner cartridges in the following order (left to right): YELLOW, MAGENTA, CYAN, and BLACK. You must locate the exhausted toner cartridge and pull it out in direction towards you. Now, you can unpack the new toner cartridge and shake it 6-7 times horizontally. After that, you can remove the protective cover from the new toner cartridge and insert it in the same location where the removed old/exhausted toner cartridge was placed. Finally, you must push the new toner cartridge until it is completely inserted, and then you can close the front cover. Please note that your Sharp MX-C401 will automatically ‘’enter’’ in image adjusting mode, when you close the front cover.