MAGICOLOR 2430DL MAGENTA OEM TONER CARTRIDGE

You can check the status of the installed toner cartridges from the Supplies Status window. Alternatively, you can check the condition of the installed toner cartridges from the [CONSUMABLE USAGE] menu of the control panel. You should replace an installed toner cartridge(s) if any of the listed messages and/or print-quality problems appears.

Print-quality problems caused by toner-cartridge related abnormalities: blank printouts, blank spots, solid black printouts, low image density, too dark images, blurred images, uneven color density, mottled image, toner smudges, vertical lines, image defects, lateral lines or bands.

[INCORRECT CART. X] is displayed – The indicated toner cartridge is incompatible and must be replaced. Please install a new, compatible X toner cartridge.

[TONER EMPTY X] – The indicated toner cartridge is empty and must be replaced.

[X TONER LOW] – The Konica Minolta MagiColor 2430DL Color Laser Printer has detected that the specified toner cartridge is nearly empty. You should purchase a new toner-cartridge set.

[TONER LIFE END X] – The X toner cartridge is exhausted. You must replace the X toner cartridge with a new one.

[X TONER NOT INSTALLED] – The indicated toner cartridge is either not/incorrectly installed or defective. You should reinstall the specified toner cartridge, and then test the Konica Minolta MagiColor 2430DL Color Laser Printer. Please install a new X toner cartridge if the problem persists.

You must move the exhausted toner cartridge to the replacement position by pressing [Menu Select] – [>] – [Menu Select] – [Down Arrow] – [>] – [Menu Select]. Then, you must open the top cover of your Konica Minolta MagiColor 2430DL Color Laser Printer. Please avoid touching the transfer belt. Next, you must open the front cover, and then remove the exhausted toner cartridge by pulling it up. After that, you must remove the plastic bag from the new toner cartridge, and then redistribute the toner by shaking the new cartridge 7-8 times up and down. Please do not touch the toner roller. Now, you must remove the cover from the toner roller, and then align the new toner cartridge with the guides of the slot. Once the new toner cartridge is aligned, you must slide it into the slot until it snaps into place, and then close the front cover. Finally, you must close the top cover of your Konica Minolta MagiColor 2430DL Color Laser Printer.