BROTHER MFC-9465CDN OEM DRUM

The approx. lifespan of the drum unit installed in your Brother MFC-9465CDN is 25,000 pages. The Brother MFC-9465CDN will display one of the listed messages if it detects a drum related abnormality.

· The message [Calibrate] is displayed – You should try to solve the problem by restarting the Brother MFC-9465CDN and pressing [Mono Start]. Please replace the installed drum unit if the problem persists.

· The message [Drum Error] is displayed – You should try to solve the problem by cleaning the corona wire of the installed drum unit. Please install a new drum unit if the problem persists.

· The message [Drum Stop] is displayed – The components of the installed drum unit have been exhausted. Please install a new drum unit.

· The message [Replace Parts Drum] is displayed – The installed drum unit has reached end of life. Please install a new drum unit.

Initially, you must switch your Brother MFC-9465CDN on, and then unlock the front cover by pressing its release button. After that, you must open the front cover, and then pull the exhausted drum unit towards you until it stops. Now, you must rotate the drum release lever to the left, and then remove the exhausted drum unit from the Brother MFC-9465CDN. In the next step of the replacement procedure, you must unlock all toner cartridges, and then remove them from the exhausted drum unit. After that, you must unpack the new drum unit, and then remove the protective cover from the new component. Once the protective cover is removed, you must install the toner cartridges into the new drum unit, and then align the green guides on the new component with the marks on the Brother MFC-9465CDN. Next, you must insert the new drum unit as far as it will go, and then rotate the drum lock lever to the right until it stops. Now, you must slide the new drum unit into the main compartment, and then close the front cover. Finally, you must reset the drum counter by selecting [Menu] – [8] – [4] – [Drum] – [1].