LASERJET 1150 PAPER PICKUP ASSEMBLY

In the first step of the replacement procedure, you must turn the HP LaserJet 1150 Laser Printer off, unplug the power cord, and then wait 5-10 minutes to allow the printer to cool. After that, you must open the toner-cartridge door, and then pull the toner cartridge out of the laser printer. Now, you must cover the toner cartridge with a sheet of paper, and then locate the exhausted pickup roller inside the toner-cartridge cavity. Once you have located the exhausted pickup roller, you must release its two tabs by pulling them gently outwards, and then rotate the exhausted pickup roller towards you. In the next step of the replacement procedure, you must remove the exhausted pickup roller by pulling it up and out of the main unit, and then unpack the new component. After that, you must position the new pickup roller in the slot, and then rotate the new component forward until it clicks into place. Next, you must insert the toner cartridge into the HP LaserJet 1150 Laser Printer, and then close the toner-cartridge door. Finally, you must plug the power cord in, and then turn the laser printer on.