In an effort to provide low-cost Quick shipping, We ship from 5 warehouses throughout the US.

3:30PM PST from California
3:30PM CST from Illinois
3:30PM CST from Texas
3:30PM EST from MA
3:30PM EST from Georgia.

Since 2007 ... We stand behind our Non-OEM products, manufactured under ISO 9001 certifications. 100% satisfaction or you may return your purchase to us within 6 months of purchase for a replacement or exchange, free of charge. OEM Products come with a manufacturer warranty only.
3D Printing (12)
Airwolf (24)
Amano (68)
Apple (78)
Brother (12971)
Canon (15383)
Casio (630)
Citizen (250)
Copystar (786)
Danka/Infotec (48)
DEC (25)
Dell (1755)
Epson (4264)
Fujitsu (22)
Gestetner (1537)
Hasler (26)
Hitachi (15)
HP (37216)
IBM (1518)
KIP (36)
Kodak (171)
Konica Minolta (4300)
Kyocera Mita (2335)
Lanier (1820)
Lexmark (9112)
MakerBot (48)
Muratec (234)
Nashuatec (74)
NEC (155)
Neopost (34)
OkiData (4570)
Olivetti (221)
Panasonic (1602)
Pitney Bowes (981)
Printek (11)
Printronix (243)
RepRap (24)
Rex Rotary (28)
Ricoh (4492)
Risograph (340)
Samsung (6008)
Savin (1761)
Sharp (4547)
Smith Corona (886)
Star Micronics (322)
Tally Genicom (378)
Texas Instruments (139)
Toshiba (1499)
Underwood (15)
Unisys (24)
Xerox (7383)
Zebra (44)
6 Products for the Toshiba e-Studio 850 Laser Printer
You Are Here: >  Top >  Toshiba >  e-Studio >  e-Studio 850


Toshiba E-Studio 850 Toner Cartridge - 6,000 Pages
  OVER 50

Price:  $42.89
Product Description
Toshiba E-Studio 850 Toner Cartridge - 6,000 Pages

This toner cartridge prints 6000 pages with average 5% coverage (Nearly all Printer manufacturers base their ink/toner cartridge yields on 5% page coverage).

This product comes with a 6 month Warranty against any defects (including free replacement). We stand behind our products 100%, as these are not manufactured by Toshiba.

Why toner? Why not call it ink? Regular ink dries quickly, which is why cartridges for inkjet printers do not last long. Laser Printers use toner, which is ink in the form of powder. A sealed toner cartridge can be stored for 2+ years prior to usage.

Product Manuals
When do I Replace a Toner Cartridge in the TOSHIBA E-STUDIO 850 Laser Printer?
The TOSHIBA E-STUDIO 850 Laser Printer is equipped with a built-in toner level monitoring system, which will warn you, when the toner cartridge runs out of toner. When the toner level becomes too low, you will see the following message ``Install new toner cartridge`` in the upper left corner of your printer`s display. A second message ``Open the toner cover`` will be displayed above the previous. Additionally, the ``Toner cover`` symbol will be blinking. In this situation, you will be able to print a maximum of 2000 sheets, before the toner runs out completely. Once the toner cartridge is completely out of toner, you will see the following message ``Add toner`` and the ``Toner cartridge`` symbol will be blinking. Please note, that all copying functions will be disabled until you replace the toner cartridge. In both of the above situations, you must replace the exhausted toner cartridge with a new one.
How to Install a Toner Cartridge in the TOSHIBA E-STUDIO 850 Laser Printer
Initially, you must open the front cover of your E-Studio 850 by inserting you fingers in its access and pulling towards you. Now, you must take out the exhausted toner cartridge by pulling its holder towards you, and then you can unpack the new one. You must shake the new toner cartridge several times, and after that you must hold it in a horizontal position and pull out the protective seal in the direction illustrated by the arrow. Once the new toner cartridge is prepared, you must match the orange label of the printer with the orange shutter of the cartridge and insert it into position. Finally, you can return the toner cartridge holder to its original position and close the toner cover of your TOSHIBA E-STUDIO 850 Laser Printer.
When do I Replace a Developer Material in the TOSHIBA E-STUDIO 850 Laser Printer?
There are various signals indicating the need of a Developer material change in your Toshiba E-STUDIO 850 Laser Printer. The most common signals are all including a certain worsening of the printed image`s quality. You can notice a background fogging, blurred images, blank copies, solid copies, multiple white bandings, or various black bandings on the printed image. In all of the above cases, you may have to replace your Toshiba E-STUDIO 850`s Developer material.
How to replace a Developer Material in the TOSHIBA E-STUDIO 850 Laser Printer
The replacement procedure of the developer material in your TOSHIBA E-STUDIO 850 Laser Printer includes the complete disassembly of several other components. You can find the complete procedure below in the exact order of execution.

Initially, you must remove both front upper and front lower covers. You can remove the upper front cover by turning both hinge pins to point at the front side and then pulling them upwards. Once the front upper cover is out, you can take off the lower cover by lifting it up.

The second component on the disassembly list is the front right inner cover. You can take off the front right inner cover by removing its holding screws and then pulling it towards you.

Next for disassembly is the toner cartridge drive unit. You must disconnect the connector and loosen the screw of the bracket. After that, you must take off the bracket, pull down the fixing pin and rotate it by 90 degrees in clockwise direction. Now, you will be able to pull out the toner cartridge unit up to 30-40 degrees from the main printer`s unit and take it off.

The fourth component on the disassembly list is the toner recycle unit. Initially, you must remove 2 screws to take off the left inner cover, and then you must detach the connector. Now, you must remove both side screws, and then you will be able to take off the toner recycle unit by pulling it towards you. Please note, that you must avoid excessive vibrations and toner spillage, while attaching/detaching the toner recycle unit.

The last component disassembly, before the actual developer material replacement, is the Developer unit disassembly. Once the toner recycle unit is out, you must release the developer unit lock by rotating the L-shaped shaft upward. Now, you will be able to take off the developer unit by detaching its connector and pulling it out in direction towards you.

After the complete disassembly of the above five printer components, you can proceed with the developer material replacement. Initially, you must take off the top cover of the developer unit by removing both screws. Now, you can discharge the old/exhausted developer material by tilting the developer unit and rotating the gear on the rear side. After that, you can unpack the new bottle of developer material and pour it in, while rotating the rear side gear. Finally, you must return all printer components to their original places by following the above procedure in reverse order, and then you can test your TOSHIBA E-STUDIO 850 Laser Printer.
Toshiba e-Studio 850 Toner Cartridge (OEM)
Toshiba 35 IN STOCK NOW

Price:  $75.89
Toshiba e-Studio 850 Staple Cartridge 3Pack (OEM) 2,000 Staples Ea.

Price:  $34.89
Toshiba e-Studio 850 Waste Toner Auger (OEM)

Price:  $47.89
Toshiba e-Studio 850 Module Kit (OEM) 450,000 Pages

Price:  $635.89
Toshiba e-Studio 850 Staple Cartridges 3Pack (OEM) 5,000 Staples Ea.
Toshiba 43 IN STOCK NOW

Price:  $50.89

Toshiba e-Studio 850 Printer Review


The Toshiba e-Studio 850 is one of the fastest copiers on the market. It can produce the first copy in just 3.5 seconds. This unit offers print speeds of 85 pages per minute. Text is sharp and easily readable at smaller fonts.


This unit can handle a variety of media types. It can print envelopes, labels, recycled paper, and regular paper. The Toshiba e-Studio 850 can copy originals up to 11" x 17". It comes with 256 MB Memory and 40 GB hard drive.
The Toshiba e-Studio 850 has outstanding paper handling capacity. It comes with four 500 sheet paper trays. Documents can be reduced and enlarged from 25% to 400%.
It delivers good output quality that everyone loves. Optional finishing features are available for the e-Studio 850 such as a multi-Position Stapling Finisher (50-Sheet), Multi-Position Stapling Finisher with Saddle-Stitch (50-Sheet), hole punch unit, and a finisher guide rail.


The Toshiba e-Studio 850 lacks color printing. Color printing can really increase the effectiveness of brochures and promotional material for your business.

Sign Up and Save To Get Exclusive Offers!  

Home | About Us | Search | My Account | CUSTOMER SUPPORT | Blog

Copyright © 2005-2016. QuikShip California.

View our Privacy Policy / Conditions of Use


TradeMark Disclosure: QuikShip Toner is a registered US Trademark. 3D Printing, Airwolf, Amano, Apple, Brother, Canon, Casio, Citizen, Copystar, Danka/Infotec, DEC, Dell, Epson, Fujitsu, Gestetner, Hasler, Hitachi, HP, IBM, KIP, Kodak, Konica Minolta, Kyocera Mita, Lanier, Lexmark, MakerBot, Muratec, Nashuatec, NEC, Neopost, OkiData, Olivetti, Panasonic, Pitney Bowes, Printek, Printronix, RepRap, Rex Rotary, Ricoh, Risograph, Samsung, Savin, Sharp, Smith Corona, Star Micronics, Tally Genicom, Texas Instruments, Toshiba, Underwood, Unisys, Xerox, Zebra and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by Any use of a brand name or model designation for a non-OEM cartridge is made solely for purposes of demonstrating compatibility, and unless noted as OEM, All products listed on this site is are non-OEM.



Popular Ink & Toner