support
 
In an effort to provide low-cost Quick shipping, We ship from 5 warehouses throughout the US.

3:30PM PST from California
3:30PM CST from Illinois
3:30PM CST from Texas
3:30PM EST from MA
3:30PM EST from Georgia.

 
 
Since 2007 ... We stand behind our Non-OEM products, manufactured under ISO 9001 certifications. 100% satisfaction or you may return your purchase to us within 6 months of purchase for a replacement or exchange, free of charge. OEM Products come with a manufacturer warranty only.
 
3D Printing (12)
Airwolf (24)
Amano (68)
Apple (78)
Brother (12971)
Canon (15383)
Casio (630)
Citizen (250)
Copystar (786)
Danka/Infotec (48)
DEC (25)
Dell (1755)
Epson (4264)
Fujitsu (22)
Gestetner (1537)
Hasler (26)
Hitachi (15)
HP (37216)
IBM (1518)
KIP (36)
Kodak (171)
Konica Minolta (4300)
Kyocera Mita (2335)
Lanier (1820)
Lexmark (9112)
MakerBot (48)
Muratec (234)
Nashuatec (74)
NEC (155)
Neopost (34)
OkiData (4570)
Olivetti (221)
Panasonic (1602)
Pitney Bowes (981)
Printek (11)
Printronix (243)
RepRap (24)
Rex Rotary (28)
Ricoh (4492)
Risograph (340)
Samsung (6008)
Savin (1761)
Sharp (4547)
Smith Corona (886)
Star Micronics (322)
Tally Genicom (378)
Texas Instruments (139)
Toshiba (1499)
Underwood (15)
Unisys (24)
Xerox (7383)
Zebra (44)
37 Products for the Lexmark X940E Printer
You Are Here: >  Top >  Lexmark >  "X" Series >  X940E

LEXMARK X940E CYAN TONER CARTRIDGE - HIGH YIELD

Lexmark X940E Cyan Toner Cartridge - 22,000 Pages
  OVER 50
IN STOCK NOW

Price:  $97.89
Product Description
Cyan Toner Cartridge for Lexmark X940E Color Laser Printer (High Yield)

The page yield for this high yield cyan toner cartridge is 22000 pages. The Page Yield can vary depending upon the amount of content printed onto each page.


This product comes with a 6 month Warranty against any defects (including free replacement). We stand behind our products 100%, as these are not manufactured by Lexmark.

Why toner? Why not call it ink? Inkjet printers use liquid ink, while color laser printers use color toner, which is like ink in powder form. A sealed color toner cartridge can be stored for over two years prior to use, as opposed to inkjet cartridges which have a shorter shelf-life.


Product Manuals
When do I Replace a Toner Cartridge in the Lexmark X940e Printer?
The four toner cartridges installed in your Lexmark X940e Printer are consumables, which means that you will have to replace them after a certain number of prints. Please note that you can extend the useful life of the installed toner cartridges by activating the Max Yield feature, and/or by decreasing the toner darkness.
You should replace the installed toner cartridges when/if:
The message [31 Missing or defective cartridge] is displayed on the LCD screen of your Lexmark X940e Printer – The machine does not detect the specified toner cartridge. There are two possible causes for this problem:
o The specified toner cartridge is defective
o The specified toner cartridge is not installed
You should check if the specified toner cartridge is installed, remove it (if it is installed), and then reinstall it. Please check the machine status after the reinstallation. You must replace the indicated toner cartridge with a new one if the problem persists.
The message [32 Replace unsupported cartridge] is displayed – The indicated toner cartridge cannot be used in your Lexmark X940e Printer. Please replace the specified toner cartridge with a new, supported one.
The message [40 invalid refill, change cartridge] is displayed – You have installed an invalid, refilled toner cartridge. Please replace the specified toner cartridge.
The message [88 toner low] is displayed – The toner is low. Please order a new toner cartridge set.
The message [88 Replace toner] is displayed – The indicated toner cartridge is exhausted. The Lexmark X940e Printer will not resume printing/copying until a new toner cartridge is installed.
Print quality is unsatisfactory
How to Install a Toner Cartridge in the Lexmark X940e Printer
Initially, you must make sure that your Lexmark X940e Printer is in Ready/Stand-by mode, and then remove the packing material from the new toner cartridge. After that, you must open the front printer door, and then turn the exhausted toner cartridge counterclockwise to unlock it. Now, you must remove the exhausted toner cartridge by pulling it slowly and carefully towards you, and then insert the new toner cartridge into the empty slot. Once the new toner cartridge is inserted, you must turn it clockwise to lock it into place, and then finalize the replacement procedure by closing the front printer cover.
When do I Replace a Developer Assembly in the Lexmark X940e Printer?
The lifespan of the four developer assemblies installed in your Lexmark X940e Printer is approx. 600,000 prints. You should replace an installed developer assembly if:
The error code [925.00] is displayed – The sensor of the Yellow developer assembly is defective. Please replace the Yellow developer assembly.
The error code [925.01] is displayed – The sensor of the Magenta developer assembly is defective. Please replace the Magenta developer assembly.
The error code [925.02] is displayed – The sensor of the Cyan developer assembly is defective. Please replace the Cyan developer assembly.
The error code [925.03] is displayed – The sensor of the Black developer assembly is defective. Please replace the Black developer assembly.
High frequency bands appear – You should try to improve print quality by replacing the drum units. Please replace the four developer assemblies and the four developer carriers if print quality remains unsatisfactory.
How to Install a Developer Assembly in the Lexmark X940e Printer
To replace a developer assembly, you must remove the following components from the Lexmark X940e Printer:
1. Front door assembly
2. Front left cover
3. Waste toner container cover
4. Waste toner container full sensor
5. Waste toner container interlock switch
6. Cyan, Magenta, Yellow, and Black toner add assemblies
7. Developer interlock plate assembly
All removal and replacement procedures are listed below.
Front door assembly
Initially, you must switch the Lexmark X940e Printer off, unplug the power cord, and then open the front door assembly. After that, you must remove the two flexible supports from the front door assembly, and then remove the mounting screws from the two brackets. Next, you must remove the two brackets, and then detach the front door assembly from the main unit.
Front left cover
You must remove the two screws securing the front left cover to the main frame, and then detach the front left cover.
Waste toner container cover
Once the front left cover is removed, you must remove the C-clip from the cover of the waste toner container, and then slide the cover to the left to remove it from the printer.
Waste toner container full sensor
You must unplug the connector of the full-sensor, and then remove the sensor by releasing its hooks.
Waste toner container interlock switch
You must remove the interlock switch from the waste toner container by releasing the hooks.
Cyan, Magenta, Yellow, and Black toner add assemblies
You must remove the mounting screws from the Cyan, Magenta, and Yellow toner add assemblies, and then pull the corresponding shutters. After that, you must remove the Yellow toner add assembly, and then remove the Magenta toner add assembly. Now, you must remove the Cyan toner add assembly, and then remove the screw securing the Black toner add assembly to the printer frame. In the next step, you must pull the Black add toner shutter, and then remove the Black toner add assembly from the machine.
Developer interlock-plate assembly
Once the toner add assemblies are removed, you must remove the screw from the harness access cover, and then remove the harness access cover from the main unit. After that, you must unplug the three connectors from the developer interlock-plate assembly, and then release the harness from the clamps of the developer interlock-plate assembly. Now, you must unplug the seven connectors from the upper harness strip, and then release the four developer harnesses from the clamps of the developer interlock assembly. In the next step, you must remove the six mounting screws from the developer interlock-plate assembly, and then pull the developer interlock-plate assembly out of the main unit while holding the four developer assemblies into place.
Developer assembly
You must remove the developer assembly that you want to replace by pulling it gently out of the machine. After that, you must unpack the new developer assembly, and then insert it into the corresponding slot of the Lexmark X940e Printer. Finally, you must reinstall all previously removed components by executing the corresponding removal procedures in reverse order.
When do I Replace a Drum Unit in the Lexmark X940e Printer?
The Lexmark X940e Printer is equipped with four drum units. The lifespan of a new drum unit is approx. 53,000 pages at 5% coverage. You can check the status of the installed drum units from the Supplies menu.
You should replace the installed drum units when/if:
The message [84 pc unit life warning] is displayed – The indicated drum unit is nearing end of life. You must make sure that you have a replacement drum unit in stock. Please install the new drum unit soon to avoid print quality problems.
The message [84 pc unit missing] is displayed – The Lexmark X940e Printer has detected that the drum slot is empty. You must make sure that the corresponding drum unit is installed. Please replace the drum unit if the problem persists.
The message [84 Replace pc unit(s)] is displayed – The Lexmark X940e Printer has detected that the photoconductive drum of the indicated drum unit can no longer produce quality toner images. You must replace the indicated drum unit with a new one.
The message [84 Unsupported pc unit] is displayed – The indicated drum unit is not designed for use in your Lexmark X940e Printer. Please replace the indicated component with a new compatible one.
Dark lines appear
White lines
Repetitive image defects occur at intervals of 1.7 and/or 3.7 inches
Toner fog
Background shading
Uneven print density
How to Install a Drum Unit in the Lexmark X940e Printer
In the initial step of the replacement procedure, you must open the front printer door, and then unlock the metal bar by pressing the release buttons of the two latches. Next, you must lower the metal bar, and then remove the exhausted drum unit by pulling it slowly towards you. After that, you must unpack the new drum unit, and then align it with the corresponding slot. Now, you must insert the front end of the new drum unit into the slot, and then remove the protective tape from the top side of the new component. In the next step of the replacement procedure, you must slide the new drum unit completely into the slot, and remove the protective casing. Once the new drum unit is installed, you must raise the metal bar, and then lock it into place by pressing the latch towards the machine. Finally, you must close the front door of your Lexmark X940e Printer.
When do I Replace a Fuser Assembly Unit in the Lexmark X940e Printer?
You should replace the fuser assembly unit when the fuser counter reaches 100,000 prints, or if any of the listed error codes and print quality problems appears. Please check the fuser assembly unit for correct installation and connection before replacing it.
[200.01 ]
[920.00 ]
[920.01 ]
[920.02 ]
[920.03 ]
[920.04
]
[920.05
]
[920.06 ]
[920.07 ]
After image
Insufficient fusing; Loose toner;
How to Install a Fuser Assembly Unit in the Lexmark X940e Printer
Initially, you must switch the Lexmark X940e Printer off, and then wait at least 10 minutes in order to allow the installed fuser assembly unit to cool. After that, you must open the left side door, loosen the two thumbscrews of the exhausted fuser assembly unit, and then remove the exhausted component by pulling it slowly and carefully towards you. Now, you must unpack the new fuser assembly unit, and then insert it into the Lexmark X940e Printer. In the next step of the replacement procedure, you must tighten the two thumbscrews of the new fuser assembly unit, and then close the left side cover of the printer. Finally, you must switch on and test your Lexmark X940e Printer.
How to Install a Lower Print Engine Card Assembly in the Lexmark X940e Printer
Initially, you must switch the Lexmark X940e Printer off, remove the blind cover, and then unplug all connectors and cords from the rear cover assembly. After that, you must remove the four mounting screws from the rear cover assembly, and then pull the rear cover assembly towards you to remove it from the machine. Now, you must unplug the connector from the rear upper bracket of the fan assembly, and then remove the two screws from the bracket. In the next step of the replacement procedure, you must remove the rear upper bracket of the fan assembly, and then loosen the mounting screw of the ground wire. After that, you must remove the ground wire, unplug the five connectors from the HVPS card of the developer/transfer roller assembly, and then remove the three screws from the HVPS card. Next, you must unplug the connector from the HVPS card, and then release the harnesses from the clamps. Once the harnesses are released, you must lift the right side of the HVPS card, and then remove the card from the Lexmark X940e Printer. Now, you must unplug the fifteen connectors from the bracket assembly of the lower print engine card assembly, release the harnesses from the clamps, and then remove the two mounting screws of the bracket assembly. In the next step, you must push the bracket assembly of the lower print engine card assembly gently down, and then remove it from the machine. After that, you must remove the two mounting screws from the lower print engine card assembly, and then remove the assembly by releasing the two plastic retainers. Finally, you must unpack the new lower print engine card assembly, and then install it by executing the current procedure in reverse order.
When do I Replace a Transfer Belt in the Lexmark X940e Printer?
The transfer belt removes the developed toner image from the four photoconductive drums of the installed drum units. You should inspect the condition of the installed transfer belt once every 100,000 prints and replace it if necessary. One of the listed error codes and print quality problems will appear when the installed transfer belt reaches the end of its useful life.
[904.01]
[904.02]
[904.05]
[904.06]
[904.07]
Color misregistration
Image deletions
How to Install a Transfer Belt in the Lexmark X940e Printer
Initially, you must open the front door of your Lexmark X940e Printer, and then unlock the transfer belt latch by pressing its release button. After that, you must raise the latch, and then lower the lift-handle of the exhausted transfer belt. Now, you must lower the transfer belt access-cover, and then pull the exhausted transfer belt slightly towards you while lifting the safety latch. Please do not touch the belt surface. In the next step of the replacement procedure, you must remove the exhausted transfer belt from the machine, and then unpack the replacement component. Finally, you must install the new transfer belt by executing the current procedure in reverse order.
When do I Replace a Waste Toner Container in the Lexmark X940e Printer?
The Lexmark X940e Printer will display one of the listed messages if it detects a waste toner container-related abnormality or status change.
[82 Replace waste toner box] – The installed waste toner container is full. All print/copy operations are disabled in this situation. Thus, you should replace the installed waste toner container with a new one.
[82 Waste toner box nearly full] – You should order a new waste toner container for your Lexmark X940e Printer. Please note that you can continue printing/copying by touching [Continue].
[82 Waste toner box missing] – The Lexmark X940e Printer does not detect the waste toner container. You must make sure that the waste toner container is installed correctly. Please replace the installed waste toner container if the problem persists.
How to Install a Waste Toner Container in the Lexmark X940e Printer
In the initial step of the replacement procedure, you must open the front door of your Lexmark X940e Printer, and then open the inner cover. After that, you must remove the old printhead lens cleaner from the front door, and then pull the waste toner container towards you to remove it from the main unit. Now, you must unpack the new waste toner container, and then clean the printhead lenses with the included lens cleaner. Once you have finished cleaning the printhead lenses, you must insert the new waste toner container into Lexmark X940e Printer, and then place the new printhead lens cleaner in the notches on the inside of the front cover. Finally, you must close the inner cover, and then close the front door of the laser printer.
LEXMARK X940E TONER CARTRIDGES (BLACK, CYAN, MAGENTA, YELLOW)
Lexmark X940E Toner - Black, Cyan, Magenta & Yellow Cartridges
  OVER 50
IN STOCK NOW

Price:  $371.89
LEXMARK X940E BLACK TONER CARTRIDGE - HIGH YIELD
Lexmark X940E Black Toner Cartridge - 36,000 Pages
  OVER 50
IN STOCK NOW

Price:  $97.89
LEXMARK X940E MAGENTA TONER CARTRIDGE - HIGH YIELD
Lexmark X940E Magenta Toner Cartridge - 22,000 Pages
  OVER 50
IN STOCK NOW

Price:  $97.89
LEXMARK X940E YELLOW TONER CARTRIDGE - HIGH YIELD
Lexmark X940E Yellow Toner Cartridge - 22,000 Pages
  OVER 50
IN STOCK NOW

Price:  $97.89
LEXMARK X940E OEM TONER CARTRIDGES SET
Lexmark X940E Toner Cartridge Set (OEM) Black, Cyan, Magenta, Yellow
Lexmark 10 IN STOCK NOW

Price:  $1,728.89
LEXMARK X940E YELLOW TONER CARTRIDGE
Lexmark X940E Yellow Toner Cartridge (OEM) 22,000 Pages
Lexmark 10 IN STOCK NOW

Price:  $542.89
LEXMARK X940E MAGENTA TONER CARTRIDGE
Lexmark X940E Magenta Toner Cartridge (OEM) 22,000 Pages
Lexmark 10 IN STOCK NOW

Price:  $542.89
LEXMARK X940E CYAN TONER CARTRIDGE
Lexmark X940E Cyan Toner Cartridge (OEM) 22,000 Pages
Lexmark 10 IN STOCK NOW

Price:  $542.89
LEXMARK X940E BLACK TONER CARTRIDGE
Lexmark X940E Black Toner Cartridge (OEM) 36,000 Pages
Lexmark 11 IN STOCK NOW

Price:  $190.89
LEXMARK X940E DRUM
Lexmark X940 OEM Black PhotoConductor Unit - 53,000 Pages
Lexmark OVER 100
IN STOCK NOW

Price:  $203.89
LEXMARK X940E 3-COLOR DRUM VALUE PACK
Lexmark X940 OEM Color PhotoConductor Kit - 53,000 Pages Ea.
Lexmark 34 IN STOCK NOW

Price:  $1,040.89
LEXMARK X940E WASTE TONER CONTAINER
Lexmark X940 OEM Waste Toner Container - 30,000 Pages
Lexmark 40 IN STOCK NOW

Price:  $47.89
X940E FUSER ASSEMBLY UNIT
Lexmark X940E Fuser Assembly Unit
 

Price:  $629.89
LEXMARK X940E FUSER ASSEMBLY UNIT
Lexmark X940 OEM Fuser Assembly (110-120V)
Lexmark

Price:  $702.89
X940E FUSER KIT 220V
Lexmark X940 OEM Fuser Kit (220V) 100,000 Pages
Lexmark

Price:  $1,420.89
LEXMARK X940E FUSER MAINTENANCE KIT
Lexmark X940E Fuser Maintenance Kit (OEM 110V) 100,000 Pages
Lexmark 10 IN STOCK NOW

Price:  $1,060.89
LEXMARK X940E BLACK DEVELOPER
Lexmark X940E Black Developer Carrier (OEM)
Lexmark

Price:  $288.89
X940E YELLOW DEVELOPER
Lexmark X940E Yellow Developer Carrier (OEM)
Lexmark SHIPS FROM MANUFACTURER
(extra 3-5 days)

Price:  $291.89
X940E MAGENTA DEVELOPER
Lexmark X940E Magenta Developer Carrier (OEM)
Lexmark SHIPS FROM MANUFACTURER
(extra 3-5 days)

Price:  $292.89
X940E CYAN DEVELOPER
Lexmark X940E Cyan Developer Carrier (OEM)
Lexmark

Price:  $293.89
LEXMARK X940E DEVELOPER ASSEMBLY
Lexmark X940E Developer Assembly (OEM)
Lexmark 10 IN STOCK NOW

Price:  $237.89
LEXMARK X940E TRANSFER BELT CLEANER ASSEMBLY
Lexmark X940 Transfer Belt Cleaner Assembly (OEM)
Lexmark 10 IN STOCK NOW

Price:  $117.89
LEXMARK X940E TRANSFER BELT MAINTENANCE KIT
Lexmark X940E Transfer Belt Maintenance Kit (OEM) 600,000 Pages
Lexmark

Price:  $2,533.89
LEXMARK X940E ADF MAINTENANCE KIT
Lexmark X940E ADF Maintenance Kit (OEM) 150,000 Pages
Lexmark 10 IN STOCK NOW

Price:  $125.89
X940E MEDIA TRAY ASSEMBLY KIT
Lexmark X940E Media Tray Assembly Kit (OEM) 500 Sheets
Lexmark

Price:  $174.89
LEXMARK X940E STAPLE CARTRIDGES
Lexmark X940E Staple Cartridges 3Pack (OEM) 5,000 Staples Ea.
Lexmark 31 IN STOCK NOW

Price:  $135.89
LEXMARK X940E TRANSFER BELT UNIT ASSEMBLY
Lexmark X940E Transfer Belt Unit Assembly (OEM)
Lexmark 1 IN STOCK NOW

Price:  $1,309.89
X940E TRANSFER BELT AUGER ASSEMBLY
Lexmark X940E Transfer Belt Auger Assembly (OEM)
Lexmark

Price:  $11.89
X940E TRANSFER BELT AUGER FRONT GEAR
Lexmark X940E Transfer Belt Auger Front Gear (OEM) 14T
Lexmark

Price:  $2.89
X940E OPERATOR PANEL TOUCH SCREEN
Lexmark X940E Operator Panel Touch Screen (OEM)
Lexmark

Price:  $699.89
X940E STAPLE CARTRIDGES
Lexmark X940E Saddle Stitch Staple Cartridge 4Pack (OEM)
Lexmark

Price:  $196.89
X940E LOWER PRINT ENGINE CARD ASSEMBLY
Lexmark X940E Lower Print Engine Card Assembly (OEM)
Lexmark

Price:  $87.89
X940E LARGE PLATEN GLASS
Lexmark X940E Large Platen Glass (OEM)
Lexmark

Price:  $200.89
X940E CMY ERASE LAMP ASSEMBLY
Lexmark X940E CMY Erase Lamp Assembly (OEM)
Lexmark

Price:  $75.89
X940E UPPER PRINT ENGINE CARD CHASSIS
Lexmark X940E Upper Print Engine Card Chassis (OEM)
Lexmark

Price:  $167.89
X940E MFP STAND ATTACH BRACKET
Lexmark X940E Main Stand Attach Bracket (OEM)
Lexmark

Price:  $62.89

About My Lexmark X940E Multifunction Printer

Pages Per Minute
Cost of Consumables
Printer Resolution
Based Off 2504 Similar Printers
 
Sign Up and Save To Get Exclusive Offers!  

Home | About Us | Search | My Account | CUSTOMER SUPPORT | Blog

Copyright © 2005-2016. QuikShip California.

View our Privacy Policy / Conditions of Use

 

TradeMark Disclosure: QuikShip Toner is a registered US Trademark. 3D Printing, Airwolf, Amano, Apple, Brother, Canon, Casio, Citizen, Copystar, Danka/Infotec, DEC, Dell, Epson, Fujitsu, Gestetner, Hasler, Hitachi, HP, IBM, KIP, Kodak, Konica Minolta, Kyocera Mita, Lanier, Lexmark, MakerBot, Muratec, Nashuatec, NEC, Neopost, OkiData, Olivetti, Panasonic, Pitney Bowes, Printek, Printronix, RepRap, Rex Rotary, Ricoh, Risograph, Samsung, Savin, Sharp, Smith Corona, Star Micronics, Tally Genicom, Texas Instruments, Toshiba, Underwood, Unisys, Xerox, Zebra and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by quikshiptoner.com. Any use of a brand name or model designation for a non-OEM cartridge is made solely for purposes of demonstrating compatibility, and unless noted as OEM, All products listed on this site is are non-OEM.

 

 

Popular Ink & Toner