QuikShipToner.com, Shopper Approved
 
support
 
In an effort to provide low-cost, Quick shipping we ship from 5 warehouses throughout the US.

3:30PM PST from California
3:30PM CST from Illinois
3:30PM CST from Texas
3:30PM EST from MA
3:30PM EST from Georgia

 
 
Since 2007 ... We stand behind our Non-OEM products, manufactured under ISO 9001 certifications. 100% satisfaction or you may return your purchase to us within 6 months of purchase for a replacement or exchange, free of charge. OEM Products come with a manufacturer warranty only.
Reviews by You! Read what our customers say, click here
 
Brother (12572)
Canon (15725)
Casio (609)
Copystar (801)
Dell (1640)
Epson (3992)
Gestetner (1284)
HP (37245)
IBM (898)
Konica Minolta (3393)
Kyocera Mita (2194)
Lanier (1804)
Lexmark (9203)
Muratec (197)
Neopost (51)
OkiData (4291)
Olivetti (202)
Panasonic (1212)
Pitney Bowes (528)
Ricoh (4531)
Risograph (406)
Samsung (4908)
Savin (1940)
Sharp (4412)
Smith Corona (836)
Tally Genicom (124)
Toshiba (1225)
Xerox (6712)
 
 
3 Products for the Xerox DocuPrint P8 Printer
You Are Here: >  Top >  Xerox >  DocuPrint Series >  DocuPrint P8

XEROX DOCUPRINT P8 DRUM

Xerox DocuPrint P8 Drum - 18,000 Pages
  10 IN STOCK NOW

Price:  $87.89
728111
Product Description
Drum for Xerox DocuPrint P8 Printer

This Drum is good for printing 18000 pages, on average. Average page coverage is 5% of toner per page (compared to white space on the paper), which is the standard Xerox specification for this drum, and a standard measuring term for the consumer printing industry.


This product comes with a 6 month Warranty against any defects (including free replacement). We stand behind our products 100%, as these are not manufactured by Xerox.

What's the difference between a drum and a toner cartridge? A toner cartridge is just that: a cartridge that contains toner. The drum does all the work.


Product Manuals
When do I Replace a Fuser Unit in the Xerox DocuPrint P8
You should replace the fuser unit installed in your Xerox DocuPrint P8 if any of the listed errors persists.
· Error 60
· Error 61
· Error 62
· Error 68
How to Install a Fuser Unit in the Xerox DocuPrint P8
In the first step of the replacement procedure, you must make sure that the Xerox DocuPrint P8 is switched off, and then unplug the power cord. After that, you must open the front cover of the main unit, and then remove the toner cartridge. Now, you must open the face up cover by pressing the two locking tabs, and then detach the cover by releasing its hinge pin. In the next step of the replacement procedure, you must remove the panel board cover, the clear plastic lens, and the Reset button, and then remove the front cover by releasing its pins. Once the front cover is removed, you must remove the three mounting screws of the rear cover, and then detach the rear cover by releasing its tabs. Next, you must detach the top cover by removing the two mounting screws, and then remove the right side cover by releasing its tabs and removing the mounting screw. After that, you must detach the wire cap by removing its fixing screw, and then disconnect the fuser harness from the Engine Controller PWB. Now, you must detach the power wires from the exhausted fuser unit by removing the two screws, and then remove the mounting screws of the exhausted component. In the next step, you must remove the exhausted fuser unit by releasing its locking pins and tabs, and then unpack the replacement component. Finally, you must install the new fuser unit by executing the current procedure in reverse order.
How to Install a DC Fan Motor in the Xerox DocuPrint P8
Initially, you must switch the Xerox DocuPrint P8 off, and then unplug the power cord. After that, you must remove the face up cover, and then remove the front cover and the toner cartridge. Now, you must remove the rear cover, the top cover, the right side covers, and the bottom shield. In the next step of the replacement procedure, you must remove the gear bracket, and then remove the controller PWB. Once the controller PWB has been removed, you must remove the engine controller PWB, and then unplug the fan connector. Next, you must remove the screws securing the exhausted DC fan motor, and then remove the exhausted component from the Xerox DocuPrint P8. Finally, you must unpack the new DC fan connector, and then install it by executing the current procedure in reverse order.
When do I Replace a Laser Unit in the Xerox DocuPrint P8
You should replace the laser unit installed in your Xerox DocuPrint P8 if any of the listed problems persists.
· Error [95] is displayed
· Image density variations
· Black printouts
· Blank printouts
How to Install a Laser Unit in the Xerox DocuPrint P8
In the first step of the replacement procedure, you must switch the Xerox DocuPrint P8 off, and then unplug the power cord. After that, you must remove the face up cover, the toner cartridge, the front cover, the rear cover, and the top cover from the main unit. Now, you must unplug the harnesses from the left side of the exhausted laser unit, and then detach the ground wire by removing its fixing screw. In the next step of the replacement procedure, you must remove the four screws that secure the exhausted laser unit into place, and then remove the exhausted component. Finally, you must unpack the new laser unit, and then install it by executing the current procedure in reverse order.
How to Install a High Voltage Power Supply PWB in the Xerox DocuPrint P8
In the initial step of the replacement procedure, you must make sure that your Xerox DocuPrint P8 is switched off, and then unplug the power cord. After that, you must remove the face up cover, the toner cartridge, and the front cover. Now, you must remove the rear cover, the top cover, and the left side cover. In the next step of the replacement procedure, you must unplug the connectors from the top side of the HVPS, and then lower the HVPS PWB. Once you have lowered the HVPS PWB, you must unplug the CN1 connector, and then remove the HVPS PWB. Finally, you must unpack the new HVPS PWB, and then install it by executing the current procedure in reverse order.
DOCUPRINT P8 TONER CARTRIDGE
Xerox DocuPrint P8 Toner Cartridge - 3000 Pages
 

Price:  $71.89
785445
XEROX DOCUPRINT P8 DEVELOPER REFILL BOTTLE
Xerox DocuPrint P8 Developer Refill Bottle
  10 IN STOCK NOW

Price:  $24.89
785821
 

Home | About Us | Search | My Account | CUSTOMER SUPPORT | FAQ |Blog

Copyright © 2005-2024. QuikShip California.

View our Privacy Policy / Conditions of Use

Session ID: QS-87364

TradeMark Disclosure: QuikShip Toner is a registered US Trademark. Brother, Canon, Casio, Copystar, Dell, Epson, Gestetner, HP, IBM, Kodak, Konica Minolta, Kyocera Mita, Lanier, Lexmark, Muratec, Neopost, OkiData, Olivetti, Panasonic, Pitney Bowes, Ricoh, Risograph, Samsung, Savin, Sharp, Smith Corona, Tally Genicom, Toshiba, Xerox and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by quikshiptoner.com. Any use of a brand name or model designation for a non-OEM cartridge is made solely for purposes of demonstrating compatibility, and unless noted as OEM, All products listed on this site is are non-OEM.