How to Install a FUSER MAINTENANCE KIT in the Xerox Phaser 7500 Color Laser Printer
Before starting with the Fuser maintenance kit replacement, you must turn off the printer by pushing its power switch/button to position ‘’O’’ and disconnect its power cord from the AC outlet. Once the printer has been unplugged from the electrical circuit, you must wait for at least 40 minutes before proceeding with the below replacement procedure.
Initially, you must open the left side cover by pulling its lock release lever upwards. Then, you must loosen the side screws of the exhausted fuser maintenance kit, but be careful not to touch the fuser, because it may be still hot. After that, you must remove the exhausted fuser maintenance kit by pulling it straight towards you, but once again avoid touching the fuser`s body and use its tabs to move it. Now, you must unpack the new fuser maintenance kit and slide it into the printer`s slot. Finally, you must secure the new fuser maintenance kit by tightening both side screws, then close the left side cover of your Xerox Phaser 7500 Color Laser Printer.