PHASER 7760 CONTROL PANEL

Important!
During printing operations the fuser assembly unit becomes very hot. Herein, you should turn the printer power off and wait for at least 10-15 minutes, before proceeding with the below transfer roller replacement procedure.

Initially, you must open the front cover of your Xerox Phaser 7760 Color Laser Printer by pulling up its lock release lever. Then, you must open the transport box of the transfer roller and take out the transfer roller assembly/disassembly tool. Now, you must use the tool to remove all four holding screws from the exhausted transfer roller, and then remove the exhausted transfer roller by lifting it upwards. After that, you must completely unpack the new transfer roller by removing the protective paper, the protective foil, and the protective plastic top cover, but be careful not to touch the surface of the roller. Once the new transfer roller is completely unpacked, you must insert it into the printer, and then secure it by installing all four holding screws. In the next step of transfer roller replacement procedure, you must close the front cover and turn on your Xerox Phaser 7760 Color Laser Printer. Finally, you must reset the transfer roller counter by navigating to [Menu Map] – [Supplies Usage Page] and selecting the [Reset Transfer Roller Life].