IMAGERUNNER 2230 DOCUMENT FEED ROLLER

You should replace the installed staple cartridge when the message [The stapler unit is out of staples] appears on the touch panel LCD of your Canon imageRUNNER 2230 Multifunctional Device.

You must start the replacement procedure by opening the front cover of the finisher. Then, you must slide the finisher to the left while pulling its release lever up. After that, you must pull the staple case out of the staple unit, and then pull the stapler cartridge stopper (the upper portion of the staple case) up while pushing the area indicated ‘’PUSH’’ to unlock the exhausted staple cartridge. Now, you must pull the exhausted staple cartridge out of the staple case, and then remove the new staple cartridge from the box. In the next step of the replacement procedure, you must insert the new staple cartridge into the staple case, and then return the staple cartridge stopper back to its original position by pushing it down. Once the new staple cartridge is locked into the case, you must remove the seal that holds the new staples together, and then insert the staple case into the finisher. Finally, you must return the finisher back to its original position, and then close the front cover.