KYOCERA MITA FS-C5015 OEM TONER CARTRIDGES SET

The Kyocera Mita FS-C5015 Laser Printer monitors the toner level constantly. The machine will display one of the listed messages when any of the installed toner cartridges reaches near or at the end of its useful life.

[Replace toner C, M, Y, K <> Replace Toner <> Clean Printer] – The indicated toner cartridges are empty. You must install new toner cartridges of the specified colors.

[Toner low C, M, Y, K] – The indicated toner cartridges are nearly empty and will have to be replaced soon. You must make sure that you have a new set of toner cartridges in stock. 

You must start the replacement procedure by opening the top cover of your Kyocera Mita FS-C5015 Laser Printer. Then, you must unlock the exhausted toner cartridge by pulling its blue lock lever towards you. Once the exhausted toner cartridge is unlocked, you must pull it carefully out of the laser printer, and then unpack a new toner cartridge for the corresponding color. In the next step of the replacement procedure, you must loosen the toner by shaking the new cartridge several times from side to side, and then insert the cartridge into the corresponding color-coded slot. After that, you must push the blue lock lever of the new toner cartridge forward until it stops, and then close the top cover of your Kyocera Mita FS-C5015 Laser Printer. Now, you must open the left cover, and then clean the main charger wire by sliding the green wire cleaner-knob in and out 3-4 times. Please return the wire cleaner-knob to its original position once you have finished cleaning the main charger wire. Next, you must take the grid cleaner out of the protective packaging, and then remove its cap. At this stage of the replacement procedure, you must pull the main charger unit 2-3 inches towards you, and then attach the grid cleaner with the pad facing up. Once the grid cleaner is attached, you must slide the handle of the main charger in and out 3-4 times, and then remove the grid cleaner from the machine. After that, you must return the main charger unit to its home position, and then clean the advanced beam array lenses by sliding the green lens cleaner-knob several times along the channel. Finally, you must insert the green lens cleaner-knob into its slot, and then close the left cover of your Kyocera Mita FS-C5015 Laser Printer.