HP LASERJET PRO 100 COLOR M175A COLOR TONER CARTRIDGES SET

In the initial step of the replacement procedure, you must open the document feeder, and then remove the fixing screw of the left cover. After that, you must remove the left cover by releasing its tabs, and then unplug the three connectors from the formatter PCA. Now, you must remove the two screws that secure the formatter PCA to the main frame, and then pull the formatter PCA out of the HP LaserJet Pro 100 Color M175A. Finally, you must unpack the new Formatter PCA, and then install it by executing the current procedure in reverse order.

In the first step of the replacement procedure, you must remove the right cover from the HP LaserJet Pro 100 Color M175A, and then remove the left cover. After that, you must remove the document feeder, and then remove the document feeder hinges. Now, you must remove the top door, and then remove the rear top cover. In the next step of the replacement procedure, you must remove the delivery cover, and then remove the rear door. Once you have removed the rear door, you must remove the lower rear cover, and then remove the formatter PCA. Next, you must unplug the four connectors from the fuser delivery assembly, and then remove the five screws to detach the metal plate from the fuser power supply. After that, you must disconnect the FFC, and then remove the fuser power supply. Now, you must remove the cable cover by releasing its tab, and then disconnect the four connectors and release the wire harnesses. In the next step, you must remove the six screws that secure the fuser delivery assembly, and then pull the fuser delivery assembly out of the HP LaserJet Pro 100 Color M175A. Finally, you must unpack the new fuser delivery assembly, and then install it by executing the current procedure in reverse order.

Initially, you must switch the HP LaserJet Pro 100 Color M175A off, and then unplug the power cord. After that, you must remove the right cover, and then remove the left cover from the main unit. Now, you must remove the document feeder and its hinges, and then remove the top door, the rear top cover, and the delivery cover. In the next step of the replacement procedure, you must remove the control panel, and then remove the left front cover. Once the left front cover is removed, you must remove the inner cover, and then remove the formatter and the wireless PCA. Next, you must unplug the four connectors, and then detach the metal plate and the fuser power supply by removing the five screws. After that, you must unplug the FFC, and then remove the cable cover by releasing its tab. Now, you must remove the cover of the engine controller assembly by releasing its tabs, and then unplug the eleven connectors from the assembly. Once you have unplugged the connectors, you must remove the six fixing screws from the engine controller assembly, and then remove the assembly by releasing the two tabs. Finally, you must unpack the new engine controller assembly, and then install it by executing the current procedure in reverse order. 

In the initial step of the replacement procedure, you must open the document feeder cover, and then remove the feeder input tray by releasing the two tabs. After that, you must release the tab, and then open the document feeder cover fully. Now, you must remove the document feeder cover by releasing its hinges, and then unplug the FFC from the feeder base. In the next step of the replacement procedure, you must detach the adhesive FFC protector from the document feeder base, and then remove the two fixing screws of the base assembly. Once the fixing screws are removed, you must open the document feeder base assembly, and then remove it from the HP LaserJet Pro 100 Color M175A. Finally, you must unpack the new document feeder base assembly, and then install it by executing the current procedure in reverse order.