IBM INFOPRINT 1332 TONER CARTRIDGE

You can obtain information about the status of the toner cartridge installed in your IBM InfoPrint 1332 Laser Printer by printing a menu settings page, which can be selected from the [Utilities] menu. Please note that the IBM InfoPrint 1332 Laser Printer uses the second line of the control panel display to notify you about any detected abnormalities or status changes.
You should replace the installed toner cartridge if any of the listed messages and print-quality problems appears.

The IBM InfoPrint 1332 Laser Printer stops printing and repeats three beeps every ten seconds – The installed toner cartridge has been exhausted. You must install a new toner cartridge.

[Change Cartridge Invalid Refill] is displayed – You have installed an incompatible refilled toner cartridge. Please replace the installed cartridge with a new, compatible product.

[Close Door or Insert Cartridge] – You must make sure that the toner cartridge is correctly installed, and then close the upper front cover firmly. You will have to replace the installed toner cartridge if the problem persists.

[Toner Low] – The IBM InfoPrint 1332 Laser Printer has detected a low toner level. You should install a new toner cartridge soon in order to be avoided print-quality issues.

[32 Unsupported Print Cartridge] is displayed – The installed toner cartridge is not intended for use in your IBM InfoPrint 1332 Laser Printer. Please install a new, compatible toner cartridge.

Printouts are too light

Toner fog or background shading appears

Vertical streaks appear

Part of the page or the entire page is printed in black

Initially, you must turn the IBM InfoPrint 1332 Laser Printer off, unplug the power cord, and then remove all printouts from the output bins. After that, you must open the upper front door, and remove the exhausted toner cartridge by lifting it up and out of the laser printer. Once the exhausted toner cartridge is removed, you must use a clean, lint-free cloth to clean the toner-cartridge cavity, but please avoid touching the transfer roller. In the next step of the replacement procedure, you must remove the new toner cartridge from the black plastic bag, and then remove the red plastic peace and foam. Please do not touch the photoconductor drum, which is located on the underside of the new toner cartridge. Next, you must redistribute the toner by shaking the new cartridge several times from side to side, and then align the tabs on each side of the new component with the guides of the toner-cartridge slot. After that, you must insert the new toner cartridge firmly into the slot, and then close the upper front door. Finally, you must turn the IBM InfoPrint 1332 Laser Printer on, and then print five sheets of paper.