FS-C5015 FUSER ASSEMBLY UNIT

In the initial step of the replacement procedure, you must turn the Kyocera Mita FS-C5015 Laser Printer off, and then unplug the power cord. Next, you must open the rear cover, and then remove the opening and closing axis from the main frame. After that, you must remove the rear cover from the main unit, and then open the top cover. Now, you must detach the top cover from the main unit, and then remove the mounting screw from the top side of the right cover. In the next step of the replacement procedure, you must remove the paper-feed unit, and then use a flat-blade screwdriver to unlatch the top side of the right cover. Once the right cover is unlatched, you must remove it from the Kyocera Mita FS-C5015 Laser Printer, and then open the left side cover. Next, you must remove the screw from the left side cover, and then remove the waste toner container from the machine. At this stage of the procedure, you must remove the left side cover by releasing its tabs, and then remove the two screws from the front side of the exhausted fuser assembly unit. Finally, you must pull the exhausted fuser assembly unit out of the Kyocera Mita FS-C5015 Laser Printer, and then install the replacement component by executing the current procedure in reverse order.