In an effort to provide low-cost, Quick shipping we ship from 5 warehouses throughout the US.

3:30PM PST from California
3:30PM CST from Illinois
3:30PM CST from Texas
3:30PM EST from MA
3:30PM EST from Georgia

Since 2007 ... We stand behind our Non-OEM products, manufactured under ISO 9001 certifications. 100% satisfaction or you may return your purchase to us within 6 months of purchase for a replacement or exchange, free of charge. OEM Products come with a manufacturer warranty only.
Brother (12572)
Canon (15725)
Casio (609)
Copystar (801)
Dell (1640)
Epson (3992)
Gestetner (1284)
HP (37245)
IBM (898)
Konica Minolta (3393)
Kyocera Mita (2194)
Lanier (1804)
Lexmark (9203)
Muratec (197)
Neopost (51)
OkiData (4291)
Olivetti (202)
Panasonic (1212)
Pitney Bowes (528)
Ricoh (4531)
Risograph (406)
Samsung (4908)
Savin (1940)
Sharp (4412)
Smith Corona (836)
Tally Genicom (124)
Toshiba (1225)
Xerox (6712)
9 Products for the Kyocera Mita KM-1650 Laser Printer
You Are Here: >  Top >  Kyocera Mita >  "KM" Series >  KM-1650


Kyocera Mita KM-1650 Toner Cartridge - 15,000Pages
  OVER 50

Price:  $35.89
Product Description
Kyocera Mita KM-1650 Toner Cartridge - 15,000Pages

This toner cartridge prints 15000 pages with average 5% coverage (Nearly all Printer manufacturers base their ink/toner cartridge yields on 5% page coverage).

This product comes with a 6 month Warranty against any defects (including free replacement). We stand behind our products 100%, as these are not manufactured by Kyocera Mita.

Why toner? Why not call it ink? Regular ink dries quickly, which is why cartridges for inkjet printers do not last long. Laser Printers use toner, which is ink in the form of powder. A sealed toner cartridge can be stored for 2+ years prior to usage.

Product Manuals
Replacing the Tone Cartridge & Waste Toner Box in the Kyocera KM-1650 Printer
When you are out of toner you will get a message on the display of the KM-1650 that says UNABLE TO COPY. PLEASE ADD TONER. The first step to replacing toner is to open the front cover of the Kyocera KM-1650. Then push the waste toner box holder to the left and take out the waste toner box. After that make sure that you don’t invert the old waste toner box. Then use the cap attached to the old waste toner box to shield the opening. Next turn the toner container lever A to the left to pull out the container. You will then place the old waste toner box in a bag for disposal. Then pull out the charger cleaner rod slowly and put it back in again. You need to repeat this action three times. When you are putting the electrical charge part to the right, pull it out about two inches. Your next action is to remove the accompanying grid cleaner from its bag and take off the cap. Make sure the grid cleaner fits and place it into the main body. Then hold the grid cleaner with your left hand. After that you will need to take out the electrical charge section as far as it will go and push it until part B does not make contact with the white pad of the grid cleaner. Do this operation two or three times.

After the electrical charge section is taken out, remove the grid cleaner and place the electrical charge section all the way into the machine. Make sure to hold the new toner vertically and tap the upper part a few times. Then turn the toner container upside down and tap it again. Another critical step is to shake the toner container several times. You still need to hold the toner container horizontally and shake it back and forth. Then you will need to insert the knob that is provided with the new toner container into the white gear of the drive section. It will be located at the back of the container. You will need to pull out the knob and set the toner container in place and turn lever C to the right. Finally install the new waste toner box and close the front cover.
Troubleshooting Problems in the Kyocera KM-1650 Printer
An error message that you may come across when owning the Kyocera KM-1650 is SYSTEM ERROR. MAIN SWITCH OFF/ON. You will often see this error if there has been a malfunction that has resulted due to a communication error during the printing processing. To alleviate this problem first turn the power switch off. If you are in the middle of printing make sure to cancel the printing job. After waiting five seconds then turn the main power switch on. This will clear the error.

Sometimes you will get a message that says RAM DISK ERROR PRESS GO. This error results when the RAM disk cannot be read or written to. The way to get your printer working again is to press the printer key and select GO. After that press the enter key and the error will be taken car of.

Users of the Kyocera KM-1650 may come across the message FORMAT ERROR MEMORY CARD. To put an end to this error message you need to format your memory card.
Kyocera KM1650 Toner Cartridge (OEM) 15,000 Pages

Price:  $54.89
Kyocera KM-1650 Drum Kit (OEM)
Kyocera Mita OVER 50

Price:  $210.89
Kyocera Mita KM-1650 Fuser Fixing Unit (OEM 120V) 300,000 Pages

Price:  $140.89
Kyocera Mita KM-1650 Developer Unit (OEM) 300,000 Pages

Price:  $155.89
Kyocera KM-1650 Staple Cartridges - 3,000 Staples Ea.

Price:  $34.89
Kyocera KM-1650 Staple Cartridges (OEM) 3,000 Pages Ea.

Price:  $98.89
Kyocera KM-1650 Tension Spring (OEM)

Price:  $14.89
Kyocera Mita KM-1650 Corona Charger Unit (OEM)

Price:  $58.89

Kyocera KM-1650 Printer Review


Kyocera offers environmentally friendly printers that are highly durable. The company produces many of the best printers on the market which are also multifunctional. Just like the entire line of Kyocera printers, the KM 1650 is well built and will last a long time without any problems. The device can be tailored to meet the individual needs of your company and is perfect for any business that is growing. It can help reduce cost and avoid waste.


This printer is extremely reliable and durable. The document processors work well on everything except really thin pieces of paper. A highly functional duplex is another great feature and it allows you to email PDFs without having to compress them. With the Kyocera KM-1650 you also get three print PDLs in the same driver which allows employees to choose the driver that functions best with their work. Some projects work better using PostScript while others work better using PCL printing. No matter which PDL you need, you will get a professional grade job with the KM-1650. Kyocera printer users also love the monocomponent system they offer. Not to mention that the photoconductor drum often outlives a Kyocera printer. Their printers work well and seem to require less repair work than printers manufactured by other companies.


For many businesses the price of purchasing the Kyocera KM-1650 is really a major drawback. Not to mention that it offers more power than most offices need for their daily task. The KM-1820 is a little too slow and only prints 18 pages a minute which is snaillike when compared to the latest printers on the market. I also don't like the fact that it takes 20 seconds to warm up the machine after hitting the power button. There are definitely quicker printers on the market for less money.

Sign Up and Save To Get Exclusive Offers!  

Home | About Us | Search | My Account | CUSTOMER SUPPORT | Blog

Copyright © 2005-2020. QuikShip California.

View our Privacy Policy / Conditions of Use

Session ID: QS-87364

TradeMark Disclosure: QuikShip Toner is a registered US Trademark. Brother, Canon, Casio, Copystar, Dell, Epson, Gestetner, HP, IBM, Konica Minolta, Kyocera Mita, Lanier, Lexmark, Muratec, Neopost, OkiData, Olivetti, Panasonic, Pitney Bowes, Ricoh, Risograph, Samsung, Savin, Sharp, Smith Corona, Tally Genicom, Toshiba, Xerox and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by Any use of a brand name or model designation for a non-OEM cartridge is made solely for purposes of demonstrating compatibility, and unless noted as OEM, All products listed on this site is are non-OEM.