FS-C5020N COLOR TONER CARTRIDGES SET

First connect the printer to the computer. Next connect the power cord to an outlet. Turn on the power switch on the printer which is located on the left side of the FS-C5020n. Then set the color registration.

When using the Kyocera FS-C5020n you may see an error message that says Clean printer press Go. This issue can be dealt with by cleaning the inside of the printer. You will see this message after you have replaced the toner container.

Close paper transfer unit is another error message you may have to deal with when using your Kyocera printer. This indicates that the paper transfer unit is open. You need to close the unit.

Check waste toner box warns you that either the waste toner box was not installed correctly or that the waste toner box is full.

The first step to install the toner container and waste toner box is to close the paper transfer unit tightly. Then open the top cover and remove the packing item. Next make sure that the toner container is facing down and shake it several times so that it is distributed evenly. Next set the new toner container in the printer with the markings upward. Now you can install the toner container by pushing down on the container. It will eventually click tightly into place. Then apply light pressure to the toner container and push the lock to its original position. The other color toner containers can be installed the same way. Finally close the top cover of the printer.

After you are finished installing the toner container, you can install the waste toner box. Begin by opening the left cover. Then open the cap of the waste toner box. Now install the waste toner box into the printer as seen in the figure and set the box into the correct space. It is essential to make sure that the waste toner box is inserted correctly and close the left cover. Then you need to connect the printer.