KONICA MINOLTA COLORFORCE CF3102 CYAN TONER CARTRIDGE

One of the listed messages will be displayed on the LCD screen if the Konica Minolta CF3102 Color Laser Printer detects a toner cartridge related abnormality.

[Install the CF toner cartridge, and then move the lever to the correct position.] – The Konica Minolta CF3102 Color Laser Printer has detected that the <Color> toner cartridge slot is empty. Please make sure that all toner cartridges are installed correctly. You will have to replace the corresponding toner cartridge if the problem persists.

[CF Toner cartridge (X) needs to be replaced soon] – You should replace the indicated toner cartridge soon to avoid print quality problems.

[Replace the CF toner cartridge] – The indicated toner cartridge is empty. Copies can no longer be made in this situation. Therefore, you should replace the indicated toner cartridge.

To install a new toner cartridge in your Konica Minolta CF3102 Color Laser Printer, you must open the front door, and then unlock the exhausted toner cartridge by turning its release lever counterclockwise. Next, you must pull the exhausted toner cartridge out of the machine, and then remove the desiccant from the replacement toner cartridge. After that, you must redistribute the toner by shaking the new cartridge several times up and down, and then remove the protective tape and the plastic cap from the new component. Now, you must align the new toner cartridge with the corresponding slot, and then insert it into place. In the next step of the replacement procedure, you must secure the new toner cartridge into place by turning the locking lever clockwise until it stops, and then slide the charger-cleaning tool several times in and out of the laser printer. Finally, you must insert the charger-cleaning unit back into the Konica Minolta CF3102 Color Laser Printer, and then close the front door.