SAVIN 2035DP TONER CARTRIDGE

Your Savin 2035DP Black & White Multifunction Printer is equipped with a built-in system, which is constantly monitoring the toner cartridge status. Once the above system detects a low toner level, you will see the following message ‘’Add toner’’ reappearing in the control display. Additionally, the ‘’Add Toner’’ indicator, which illustrates six black dots in a pyramidal order with an arrow pointing towards the dots, will be on (blinking). You must replace the exhausted toner cartridge, when the above warning message appears. Otherwise, the remaining toner will be completely consumed after approximately 50 new prints/copies, which will lead to the disabling of all printing operations. The printing quality will be also affected by the low toner level. Herein, you should always keep a spare toner cartridge for your Savin 2035DP Black & White Multifunction Printer.

You must start the toner cartridge replacement procedure in your Savin 2035DP Black & White Multifunction Printer by opening the front cover. Then, you must raise the green holder lever and push it in, in order to pull out the toner holder afterwards. Now, you must gently push the exhausted toner cartridge back and slowly pull it out of the printer. Please note, you must avoid shaking the exhausted toner cartridge, because it may leak. After that, you must prepare the new toner cartridge by unpacking and shaking it 7-8 times horizontally. In the next step of the toner cartridge replacement procedure, you must remove the black protective cap and insert the new toner cartridge into the toner cartridge holder. Once the new toner cartridge is in place, you must push the green lever back into the printer until it clicks, and then push it down to locked position. Finally, you can close the front cover and test your Savin 2035DP Black & White Multifunction Printer.