MURATEC MFX-1330 OEM TONER CARTRIDGE

The standard yield toner cartridge installed in your Muratec MFX-1330 Multifunction Printer lasts approx. 5,000 pages at 6% coverage. The built-in system of the laser printer monitors the status/condition of the installed toner cartridge constantly. The system will display an appropriate warning message on the LCD screen when the toner level drops under the recommended minimum, or if a toner cartridge related abnormality has been detected. Please replace the installed toner cartridge with a new one if:

‘’No Toner Cartridge’’ – This message will appear on the LCD screen if the toner cartridge is not installed, incorrectly installed, or damaged/defective. For that reason, you should try to resolve the problem by reinstalling the toner cartridge correctly. Please install a new toner cartridge if the problem persists.

‘’Please Replace Toner’’ – The installed toner cartridge is at the end of its useful life. The Muratec MFX-1330 Multifunction Printer cannot print. A new toner cartridge must be installed.

‘’Toner Low’’ – The Muratec MFX-1330 Multifunction Printer has detected a low toner level. Please make sure that you have a new toner cartridge in stock.

Print quality is poor. Examples for print-quality issues that indicate an exhausted toner cartridge: blank printouts, solid black printouts, too light printouts, blurred printouts, incomplete printouts, white/black lines, toner smudges.

In the initial phase of the replacement procedure, you must open the front cover of your Muratec MFX-1330 Multifunction Printer, and then unlock the used toner cartridge by turning its locking lever to the left. After that, you must pull the used toner cartridge straight towards you to remove it from the multifunction laser printer, and then take the new toner cartridge out of the protective box. Now, you must hold the new toner cartridge with both hands and shake it several times up and down to ensure equal toner distribution, and resp. to avoid future print-quality problems. Please do not touch the roller of the new toner cartridge. In the next step of the replacement procedure, you must slide the new toner cartridge slowly along the guides of the slot until it locks into place, and then turn the locking lever to the right (locked position). Finally, you must close the front cover, and then test your Muratec MFX-1330 Multifunction Printer.