KONICA MINOLTA MAGICOLOR 5650EN CYAN OEM TONER CARTRIDGE

Your KONICA MINOLTA MagiColor 5650EN is equipped with four toner cartridges, which are consumable components with a certain, limited lifespan. Therefore, the installed toner cartridges are constantly monitored by the precise built-in system of your laser printer. The built-in system will display a warning or an error message, once it detects a toner cartridge related abnormality. All of the used messages indicating such abnormalities are listed and described below.

''TONER LOW X'' – This is a warning message, and it indicates that one or several toner cartridges is/are near the end of its/their useful life. You should install new toner cartridges of the indicated colors soon. Otherwise, the remaining toner will be completely consumed after less than 1200 new prints at 5% coverage.

''TONER OUT X'' or ''TONER OUT <second line> REPLACE X'' – This is an error message, which indicates that one or several toner cartridges have been completely exhausted. All print operations will be suspended, until a new toner cartridge/cartridges of the indicated colors are installed.

''TONER MISSING <second line> CHECK X'' – This is an error message, which is usually indicating an incorrect installation of one or several toner cartridges. However, you will have to install new toner cartridges of the indicated colors, if the message is still appearing after a correct re-installation of the problematic toner cartridges.

You should always keep a spare set of toner cartridges for your KONICA MINOLTA MagiColor 5650EN in stock, but please remember to store all consumable components in accordance with the manufacturer's recommendations and instructions. 

Initially, you must open the front cover of your KONICA MINOLTA MagiColor 5650EN, and locate the exhausted toner cartridge. Please note that the installed toner cartridges are arranged in the following order (left-right): Yellow, Magenta, Cyan, and Black. In the next step of the replacement procedure, you must pull the lever in front of the exhausted toner cartridge to the right, and then unlock the exhausted component by pulling the front lever towards you. After that, you must remove the exhausted toner cartridge from the laser printer by grabbing its handle and pulling straight towards you, and then unpack the new toner cartridge. Now, you must prepare the new toner cartridge for installation by shaking it at least 5 times horizontally, and then insert it into the corresponding (regarding color) slot of the laser printer. Once the new toner cartridge has been completely inserted, you must remove its protective film by pulling it straight towards you, and then raise the front lever to ''upper''/locked position. Finally, you must slide the front lever to the left, and then close the front cover of your KONICA MINOLTA MagiColor 5650EN color laser printer.