BROTHER DCP-9010CN MAGENTA OEM TONER CARTRIDGE

One of the listed indications will appear if any of the toner cartridges installed in your Brother DCP-9010CN needs replacing.

 

·         Vertical white streaks

 

·         Vertical color streaks

 

·         Horizontal color streaks

 

·         Blank printouts

 

·         Missing color(s)

 

·         Image defects appearing at intervals of 1.1811 in

 

·         Variations in image density (one or multiple colors)

 

·         The message [Cartridge Error <> put the Black Toner Cartridge back in] is displayed

 

·         The message [No Toner] is displayed

 

·         The message [Replace Toner] is displayed

 

·         The message [Toner Low] is displayed

 

·         The message [Prepare New X Toner Cartridge] is displayed

In the initial step of the replacement procedure, you must make sure that your Brother DCP-9010CN is switched off, and then unplug the power cord. After that, you must open the top cover of the machine by pulling the release lever up, and then remove the corresponding drum unit and toner cartridge assembly from the main compartment. Now, you must press the release lever that is located on the left side of the drum unit, and then detach the exhausted toner cartridge from the drum unit. In the next step of the replacement procedure, you must grasp the blue tab that is located on the top side of the drum unit, and then slide it several times from left to right and right to left. After that, you must return the blue tab to its home position, and then take the replacement toner cartridge out of the protective bag. Next, you must shake the new toner cartridge several times from side to side, and then detach the protective plastic cover from the new component. Once the plastic cover is removed, you must insert the new toner cartridge into the drum unit until it clicks into place, and then insert the drum unit and toner cartridge assembly into the corresponding slot. Finally, you must close the top cover, and then test your Brother DCP-9010CN.