X6570 HIGH YIELD BLACK OEM INK CARTRIDGE

The average yield of a standard color or black toner cartridge is 210 pages continuous printing. You can check the ink levels of the installed toner cartridges by selecting [Maintenance] – [Ink Level]. An installed ink cartridge should be replaced if any of the listed indications appears. Please note that you can solve some print quality problems by cleaning and aligning the installed ink cartridges.

Blank pages

Skewed lines

Dark print

Smudges

Faded print

Streaks

Incorrect colors

White lines

Light and/or dark lines

Improperly formed characters

[1102], [1203], [1204], or [120F] is displayed – The Lexmark X6570 Printer has detected a cartridge error. You should try to solve the problem by reinstalling the ink cartridges. Please also check the ink cartridges for damages. All damaged ink cartridges must be replaced.

[Black Ink Low] or [Color Ink Low] is displayed – The indicated ink cartridge is nearly empty and will have to be replaced soon. Therefore, you should obtain a new ink cartridge of the indicated color soon.

[Error 1104 – Both Ink Cartridges], [Error 1205 – Black Cartridge], or [Error 1206 – Color Cartridge] – You should reinstall the ink cartridges, and then test the Lexmark X6570 Printer. Please replace the corresponding ink cartridge if the problem persists.

[Left Cartridge Incorrect] or [Right Cartridge Incorrect] is displayed – You must make sure that the ink cartridges are installed into the corresponding/proper slots. If the error message is still displayed, you must make sure that the indicated ink cartridge is designed for use in your Lexmark X6570 Printer. All incompatible ink cartridges must be replaced.

[Left Cartridge Missing] or [Right Cartridge Missing] is displayed – The Lexmark X6570 Printer does not detect the specified ink cartridge. You must make sure that the indicated ink cartridge is installed. A new ink cartridge of the corresponding color must be installed if the problem persists.

You must make sure that the Lexmark X6570 Printer is on, and then lift the scanner unit. Once the ink-cartridge carrier stops moving, you must open the cover of the slot where the exhausted ink cartridge is installed. After that, you must remove the exhausted ink cartridge from the machine, and then remove the protective tape from the back and bottom of the new ink cartridge. In the next step of the replacement procedure, you must insert the new ink cartridge into the corresponding slot of the carrier, and then close the cover of the slot. Finally, you must close the scanner unit, and then print an alignment page.