CANON FAX JX210P BLACK OEM INK CARTRIDGE TWIN PACK

Your Canon FAX JX210P is equipped with a built-in system, which is constantly monitoring the ink level of the installed ink cartridge. The main purpose of the constant ink cartridge monitoring is any occurred abnormalities to be detected as soon as possible, in order to be avoided non-operational print/copy modes, and resp. interruptions of your work. Therefore, the built-in monitoring system will display the following warning message ''RECOMMEND NEW CRT'', once a low ink level is detected. You should install a new ink cartridge soon after the initial appearance of this advance notification. Otherwise, the remaining ink will be consumed, which will lead to the disabling of all print operations. The non-operational print mode will be indicated with the displaying of the following error message ''NO INK'' on the control display of your FAX JX210P. Please note that the machine will still receive faxes, but it will store them into the internal memory, until a new ink cartridge is installed. Please also note that the installed ink cartridge should be replaced, if the following message ''INK VOL UNKNOWN'' is reappearing on the control LCD. It is always better, if you keep a spare ink cartridge for your Canon FAX JX210P in stock, but please remember to store all consumable components in accordance with the manufacturer's instructions.  

Initially, you must make sure that your Canon FAX JX210P is in ''stand-by'' mode, and then open the top cover until it locks in ''upper''/''opened'' position. After that, you must unlock the exhausted ink cartridge by gently pushing it down, and then remove it from the fax machine by pulling carefully towards you. Please be aware that you should avoid shaking the exhausted ink cartridge. Now, you must take the new ink cartridge out of the protective transport packaging, and then remove its protective tape, but please avoid touching the contact area of the new toner cartridge and also avoid shaking the cartridge. Once the new ink cartridge is prepared, you must insert it into the main unit until it clicks into place, and then load paper in the rear tray. Finally, you must close the top cover and test your Canon FAX JX210P.