STYLUS PRO 4880 CYAN OEM INK CARTRIDGE (ML YIELD)

You can check the status of the ink cartridges installed in your Epson Stylus Pro 4880 from the [CRTG INFO] menu. One of the listed indications will appear if an installed ink cartridge needs replacing.

 

·         An ink status light is solid red

 

·         An ink status light flashes red

 

·         The message [INK LOW] is displayed

 

·         The message [Replace INK CTRG] is displayed

 

·         The message [INVALID INK CRTG] is displayed

 

·         The message [WRONG INK CTRG] is displayed

 

·         The message [SET INK CTRG] is displayed

 

·         The message [NO INK CTRG] is displayed

 

·         Horizontal banding appears

 

·         Printouts are faint

 

·         Printouts have gaps

In the first step of the replacement procedure, you must make sure that your Epson Stylus Pro 4880 is switched on, and then select [MAINTENANCE] – [<color> INK CARTRIDGE]. After that, you must wait until the message [RAISE RIGHT INK LEVER APPEARS], and then raise the right ink lever. Once the message [RAISE LEFT INK LEVER] appears, you must raise the left ink lever, wait until the message [REMOVE INK CTRG] appears, and then remove all ink cartridges. Now, you must insert the three conversion cartridges, wait until the message [LOWER LEFT INK LEVER], and then lower the left ink lever. In the next step of the replacement procedure, you must wait until the message [RAISE LEFT INK LEVER] appears, and then raise the left ink lever. After that, you must remove the conversion cartridges, wait until the message [INSERT INK CTRG] appears, and then install all ink cartridges (including the new one). Next, you must lower both ink levers, wait until the message [RAISE INK LEVERS] appears, and then raise the ink levers. Finally, you must close the ink compartment covers.