XEROX PHASER 3635 OEM TONER CARTRIDGE

Your Xerox Phaser 3635MFPS is equipped with a built-in system, which is constantly monitoring the status of the toner cartridge. Once the toner level in the toner cartridge becomes too low, the toner monitoring system will display the following message ‘’Replace the Print Cartridge’’ on the Phaser 3635MFPS` control display. Please note, the above message will be displayed, only when the ‘’Notification Message’’ is enabled. If you decide to use the printer without replacing the toner cartridge, the remaining toner will be consumed very soon, which will lead to the complete disabling of the system`s copying/printing capabilities. Herein, you should always keep a spare toner cartridge for your Xerox Phaser 3635MFPS.

The toner cartridge replacement in your Xerox Phaser 3635MFPS is a very easy procedure, which won`t take you more than 5-10 minutes for complete execution. Initially, you must open the right side cover of your 3635MFPS, so the release latch of the front cover is accessible. Then, you must use the release latch to open the front cover, behind which is located the toner cartridge. Now, you must remove the exhausted toner cartridge by pulling it slowly towards you, until it is completely out of the system. Once the old/exhausted toner cartridge is out, you must prepare the new one by shaking it 5-6 times horizontally and removing its protective cover. After that, you must insert the new toner cartridge into the system by pushing it slowly into the toner cartridge slot. Finally, you must close the front cover of your 3635MFPS and press the ‘’Confirm’’ button. Please note, if the toner cartridge has been replaced after the appearance of the ‘’Replace the Print Cartridge’’ message, then the system will automatically reset the toner usage counters.