BROTHER HL-2700CN YELLOW OEM TONER CARTRIDGE

Your Brother HL-2700CN Laser Printer is equipped with a built-in system, which is constantly monitoring the status of all four toner cartridges. Once the toner level in any/several of the installed toner cartridges becomes too low, you will see one/several of the listed below warning messages:

• ‘’READY ‘’K’’ (BLACK)’’
• ‘’READY ‘’C’’ (CYAN)’’
• ‘’READY ‘’M’’ (MAGENTA)’’
• ‘’READY ‘’Y’’ (YELLOW)’’

You should replace the exhausted toner cartridge/cartridges, soon after the initial appearance of any of the above messages. Otherwise, the remaining toner in the nearly empty toner cartridge will be consumed very soon, which will lead to the disabling of all printing operations. The non-operational printer`s mode will be indicated with one/several of the listed below error messages:

• ‘’TONER EMPTY ‘’C’’ (Cyan). Replace the ‘’C’’ toner cartridge’’
• ‘’TONER EMPTY ‘’M’’ (Magenta). Replace the ‘’M’’ toner cartridge’’
• ‘’TONER EMPTY ‘’Y’’ (Yellow). Replace the ‘’Y’’ toner cartridge’’
• ‘’TONER EMPTY ‘’K’’ (Black). Replace the ‘’K’’ toner cartridge’’

The toner cartridge replacement is one of the easiest procedures, which won`t take you more than 10 minutes for complete execution. Initially, you must open the front cover of your Brother HL-2700CN Laser Printer and locate the exhausted toner cartridge. Then, you must pull the exhausted toner cartridge out of the printer`s slot by pulling it in direction straight towards you, but avoid shaking or tilting the cartridge too much. Now, you must unpack the new toner cartridge, and shake it 4-5 times horizontally afterwards. After that, you must remove the protective tape and the protective plastic cover from the new toner cartridge. Immediately after the new toner cartridge preparation, you must slide the cartridge along the guides of the toner cartridge slot, but do not push it completely, because it will be automatically positioned, once the front cover is closed. In the final step of the toner cartridge replacement procedure, you must close the front cover and test your Brother HL-2700CN Laser Printer.