The following directions will explain how to set up the environment for communication between the machine and computers on your network. The first action is to press SNMP Settings on the network settings screen. Then you should specify the settings for SNMP v.3. Next users should establish monitoring for the printer management information. Afterwards use the Network Settings screen and select ENABLE DEDICATED PORT. The proceeding step is to select USE SPOOLER.

Use the TCP/IP settings screen to select IPv4 Settings and select the IP Address Settings. Then use the IP Address Settings to choose the IP address. Users can choose either DHCP, RARP, and BOOTP. The third step is to press the DNS Settings<DNS Server Address Settings.  This in the IPv4 you need to specify whether you want to use DNS updating. Next you will see the DNS Settings screen. You need to choose DNS HOST NAME/DOMAIN NAME SETTINGS. Users will enter the name of the machine as HOST NAME and the network name of the machine as DOMAIN NAME. Afterwards use the DNS Settings Screen to select DNS Dynamic Update Settings. You will select whether you want a DNS Dynamic Update, register a stateless address, register a manual address, and register a stateful address.  Then look at the TCP/IP Settings screen and choose LPD Print settings. The following step is to select RAW Print Settings to specify the following.

Users should next press SNTP Settings and choose among several selections. Then on the TCP/IP settings screen, select FTP Print Settings. Next on the TCP/IP screen choose WSD Print Settings and specify whether you want WSD browsing on. WSD is for print applications. You will also have the option of turning <Use WSD Browsing>off. Next you will select USE PASV FTP which will allow you to choose whether you want PASV on or off.  It is recommended that you contact your network administrator before specifying the PASV mode.