BROTHER HL-6180DW OEM TONER CARTRIDGE - HIGH YIELD

Depending on its type, the toner cartridge installed in your Brother HL-6180DW Laser Printer will last 3,000, 8,000, or 12,000 pages. One of the listed messages will be displayed when the installed toner cartridge reaches end of life.

 

·         [TONER LOW]

 

·         [REPLACE TONER]

In the initial step of the replacement procedure, you must switch the Brother HL-6180DW Laser Printer on, and then wait at least 15 minutes. After that, you must unlock the front cover by pressing the release button located on the top side of laser printer, and then open the cover. Now, you must remove the drum unit and toner cartridge assembly from the Brother HL-6180DW Laser Printer by pulling it towards you, and then detach the exhausted toner cartridge from the drum unit while pressing the green lock lever. In the next step of the replacement procedure, you must unpack the new toner cartridge, and then shake it several times from side to side. After that, you must remove the protective cover, and then insert the new toner cartridge into the drum unit, making sure that it locks into place. Once the new toner cartridge is installed, you must clean the primary corona wire of the drum unit by sliding the green tab along the cleaning channel, and then return the tab to its original position. Finally, you must insert the drum unit and toner cartridge assembly into the Brother HL-6180DW Laser Printer, and then close the front cover.