HP COLOR LASERJET CP4005N IMAGE TRANSFER KIT

The approximate useful life of the electrostatic transfer belt installed in your HP Color LaserJet CP4005n Printer is 100,000 pages. You can obtain information about the status of the installed electrostatic transfer belt by printing a supplies status page, which can be selected from the [INFORMATION] menu of the control panel. You should replace the electrostatic transfer belt, if the following conditions are met:

‘’59.XY PRINTER ERROR’’ is displayed – You must make sure that the electrostatic transfer unit is correctly installed into the laser printer. You must install a new image transfer kit, if the problem persists.

‘’INSTALL TRANSFER UNIT’’ – Your HP Color LaserJet CP4005n Printer cannot detect the electrostatic transfer belt. The most common cause of this problem is a faulty, missing, or incorrectly installed electrostatic transfer belt. You should try to resolve the problem by reinstalling the electrostatic transfer belt. A new image transfer kit must be installed, if the message is still displayed after the reinstallation.

‘’ORDER TRANSFER KIT <> LESS THAN X PAGES’’ – The installed electrostatic transfer belt is near the end of its useful life. You must install a new image transfer kit soon to avoid print quality issues.

‘’REPLACE TRANSFER KIT’’ – The HP Color LaserJet CP4005n Printer has printed more than 100,000 pages since the last replacement of the image transfer kit. You must install a new image transfer kit as soon as possible. The complete replacement procedure is included below.

Initially, you must turn the HP Color LaserJet CP4005n Printer off, and then open its top and front covers. After that, you must lower the used electrostatic belt by pulling its green handle gently towards you. Then, you must remove the used electrostatic transfer belt by pressing its blue latches and lifting it out of the laser printer. In the next step, you must unpack the new image transfer kit, and then install the new electrostatic transfer belt into the main unit. Finally, you must close the front and top covers, and then test your HP Color LaserJet CP4005n Printer.