E-STUDIO 16 2PACK OF TONER CARTRIDGES

Your Toshiba e-Studio 16 Laser Printer is equipped with a message display panel, where you can check its current status. There are three graphic symbols on the panel with a LED light above each, and if you see any of this LED lights flashing, that indicates the need for certain maintenance or a printing resource replacement. The symbol indicating low toner levels is a box with 6 black dots in pyramidal order and an arrow pointing towards the black dots. When the toner in the toner cartridge becomes too low, the LED lamp above the symbol will be on (without flashing), and you still will be able to print a maximum of 100 pages. The LED symbol is followed by an appropriate message on your e-Studio 16 display, which states ``Toner is LOW`` and it is displayed in the top left corner. When the LED symbol is constantly blinking/flashing, the toner cartridge is completely exhausted and all printing operation will be stopped/blocked. You will also see the following message ``Toner empty`` on your e-Studio 16`s display. In both situations, you must replace the exhausted toner cartridge with a new one.

Initially, you must open the front cover of your Toshiba e-Studio 16 Laser Printer and then locate the exhausted toner cartridge. Once you`ve found it, you must release the hook from the toner cartridge to unlock it, and then you will be able to take the cartridge out by pulling it towards you. Now is the time to unpack your new toner cartridge and shake it horizontally five-six times. After that, you must remove the sealing tape from your new toner cartridge in the direction pointed by the arrow, and then you can install the cartridge by slowly sliding it into the e-Studio 16 Laser Printer. Afterwards, it is very important to move the charger wire cleaning lever (in both possible directions) of the Process Unit, because by moving it you will clean the charger wire. The charger wire cleaning lever is located next to the toner cartridge (on the left). Finally, you can close the front cover and continue using your Toshiba e-Studio 16 Laser Printer.