HP LASERJET M3027 TONER CARTRIDGE - HIGH YIELD

The lifespan of the standard toner cartridge installed in your HP LaserJet M3027 Multifunction Printer is approx. 6500 prints at 5% page coverage. The actual cartridge yield could not be precisely specified, because it depends upon various factors, such as the average number of pages printed per job, the complexity of the printed documents, and the selected print quality settings. You can obtain information about the estimated remaining pages and the toner level by printing a supplies status page. Please note that you can print a supplies status page by selecting [Administration] – [Information] – [Configuration/Status pages] – [Supplies Status Page] – [Print] from the control panel of your HP LaserJet M3027 Multifunction Printer.
An appropriate warning or error message will be displayed on the control panel, when a toner-cartridge status change or an abnormality occurs. You should replace the installed toner cartridge, if any of the listed messages is continuously displayed.

‘’10.XX.YY Supply memory error’’ – The e-label of the installed toner cartridge is missing, or the cartridge is incorrectly installed. You should confirm that the toner cartridge is firmly inserted into the laser printer. A new toner cartridge must be installed, if the issue persists.

‘’Install black cartridge’’ – The HP LaserJet M3027 Multifunction Printer cannot detect an installed toner cartridge. You must make sure that the toner cartridge is correctly installed. You will have to install a new toner cartridge, if the problem persists.

‘’Order black cartridge’’ – The installed toner cartridge is nearly empty. Please note that all print/copy operations will be disabled after less than 100 new prints. Therefore, you should install a new toner cartridge as soon as possible.

‘’Replace black cartridge’’ – The installed toner cartridge is empty. You must install a new toner cartridge to continue printing.

Please note that some toner cartridge abnormalities could not be detected by the built-in monitoring system. You can determine if the installed toner cartridge needs to be replaced by evaluating the print quality results achieved by your HP LaserJet M3027 Multifunction Printer. A nearly empty, expired, or damaged toner cartridge can cause various print quality issues, such as faded prints, specks, lines, gray background, toner smear, ‘’ghosting’’, ‘’tire tracks’’, and white spots on black. You should replace the installed toner cartridge, if any of the listed print quality issues appears. Please follow the instructions given below to install a new toner cartridge in your HP LaserJet M3027 Multifunction Printer.

You must start the replacement procedure by opening the front door of your HP LaserJet M3027 Multifunction Printer. Then, you must remove the used toner cartridge from the laser printer by pulling it carefully towards you. In the next step of the replacement procedure, you must take the new toner cartridge out of the protective plastic bag, and then redistribute the toner by shaking the new consumable component 7-8 times from side to side. Please do not touch the shutter or the roller of the new toner cartridge, in order to avoid future print quality problems. Now, you must pull the protective shipping tape out of the new toner cartridge, and then align the cartridge with the guides of the slot. After that, you must insert the new toner cartridge firmly into the printer, and then close the front door of your HP LaserJet M3027 Multifunction Printer. Once the front door is closed, you must confirm that ‘’Ready’’ is displayed on the control panel, and then test your laser printer.