HP LASERJET 6P OEM TONER CARTRIDGE

The lifespan of the toner cartridge installed in your HP LaserJet 6P Printer depends upon various factors, such as the average percentage of page coverage, the chosen print density level, the average number of printed pages per job/task, etc… You could increase the cartridge lifespan by turning on the ‘’HP EconoMode’’, which creates draft quality prints by reducing the amount of used toner.
The installed toner cartridge must be replaced, when any of the listed below signals and print quality issues appears.

• Vertical fade, vertical lines, background shade, or/and vertical repetitive defects – These issues are indicating nearly exhausted or damaged toner cartridge. You must install a new toner cartridge in your HP LaserJet 6P Printer.

• The third LED on the control panel is on/lit – The toner cartridge is missing, or it is incorrectly installed. You must make sure that the toner cartridge is fully inserted into the slot. A new toner cartridge must be installed, if the issue persists.

• Blank or incomplete printing – Please make sure that the sealing tape have been removed during the installation of the toner cartridge. A new toner cartridge must be installed, if the issue is still appearing afterwards.

You should always keep a spare toner cartridge for your HP LaserJet 6P Printer in stock, but please store this consumable component in a dark room, at temperatures between -4degreesF to 104degreesF/-20 to 40degreesC. Please avoid unpacking the new toner cartridge until you are ready to use it. The complete replacement procedure is included below.

You must start the installation by opening the top cover of your HP LaserJet 6P Printer. Then, you must remove the exhausted toner cartridge by slowly pulling it out of the main compartment. After that, you must take the new toner cartridge out of the protective packaging, and then loosen and redistribute the toner by shaking the new component several times from side to side. Now, you must completely pull the clear plastic sealing tape out of the right side of the new toner cartridge. Once the new toner cartridge is prepared, you must insert it into the slot, but please make sure that the arrow stamped on the new toner cartridge is pointing towards the inside of the laser printer. Finally, you must close the top cover of your HP LaserJet 6P Printer.