PANASONIC KX-MB2010 OEM DRUM

There are many signs indicating the need for a drum unit replacement in your KX-MB2010, and these signs vary from a certain worsening of the print quality to reappearing warning messages, displayed by the built-in monitoring system. The most common sign includes one of the following warning messages ‘’REPLACE DRUM’’ or ‘’DRUM LIFE LOW REPLACE SOON’’ reappearing in the control display of your Panasonic KX-MB2010 MultiFunction Printer. Once you have seen any of the above warning messages, you should promptly replace the exhausted drum unit in your Panasonic KX-MB2010 MultiFunction Printer. Otherwise, the print quality will be gradually decreasing, and eventually all printing operations will be blocked due to a faulty drum unit.

Initially, you must open the top cover of your Panasonic KX-MB2010 MultiFunction Printer and locate the exhausted drum unit. Then, you must completely remove the exhausted drum unit from the printer by holding its tabs and pulling upwards. Once the exhausted drum unit is out, you must detach the toner cartridge from its upper side by pulling the toner cartridge upwards, while pressing on its green lock release levers. After that, you must take the new drum unit out of the plastic transport bag, but be careful not to touch the black drum`s surface. Now, you must place the toner cartridge into the new drum unit, and then push it down while pressing its green lock release levers. In the next step of the replacement procedure, you must insert the new drum unit along with the attached toner cartridge into the printer`s slot, but avoid touching the black drum`s surface. Finally, you must make sure that the marks of the new drum unit are matching the marks of the slot, and then close the top cover of your Panasonic KX-MB2010 MultiFunction Printer.