MAGICOLOR 1600W MAGENTA OEM TONER CARTRIDGE - HIGH YIELD

Your Konica Minolta MagiColor 1600W Color Laser Printer features four toner-cartridge indicators. The laser printer uses the control panel indicators to notify the user when a toner-cartridge related abnormality occurs. All light-patterns used for indication of such abnormalities are listed and explained below.

The green [Ready] indicator is on and the [X Toner] indicator blinks slowly – The corresponding toner cartridge is nearly empty. You should purchase a new toner cartridge set.

The green [Ready] indicator is on and the [X Toner] indicator blinks rapidly – The indicated toner cartridge is not intended for use in your Konica Minolta MagiColor 1600W Color Laser Printer. Please replace the indicated toner cartridge with a new, compatible one.

The green [Ready] and the [X Toner] indicators are on – The specified toner cartridge is empty. You must install a new X toner cartridge.

The green [Ready] indicator is on, the [Error] indicator flashes, and the [X Toner] indicator is on – The Konica Minolta MagiColor 1600W Color Laser Printer has detected a hardware problem with a component of the indicated toner cartridge. You should try to solve the problem by turning the laser printer off and then back on. Please replace the indicated toner cartridge if the problem persists.

The green [Ready] indicator is off, the [Error] indicator is on, and the [X Toner] indicator is on – The specified toner cartridge is not installed, or it has been exhausted. You should reinstall the specified toner cartridge, and then test the laser printer.

Print quality is unsatisfactory

Initially, you must switch the Konica Minolta MagiColor 1600W Color Laser Printer to Change Toner mode by pressing the Rotate Toner button, and then open the front cover. After that, you must unlock the exhausted toner cartridge by pulling its handle down, and then remove the exhausted cartridge from the laser printer. Now, you must take the new toner cartridge out of the plastic bag, and then shake it several times up and down to ensure equal toner distribution. In the next step of the replacement procedure, you must remove the protective cover from the toner roller, and then align the shafts of the new toner cartridge with the guides of the slot. Once the new toner cartridge is aligned, you must slide it along the guides until it locks into place, and then close the front cover of your Konica Minolta MagiColor 1600W Color Laser Printer. Finally, you must reset the laser printer by pressing the [Clear] key.