BROTHER DCP-8110DN OEM TONER CARTRIDGE - HIGH YIELD

You should replace the toner cartridge installed in your Brother DCP-8110DN if any of the listed indications persists.

 

·         The error [Cartridge Error] appears

 

·         The error [No Toner] appears

 

·         The error [Replace Toner] appears

 

·         The error [Toner Low] appears

 

·         Various print quality problems appear

In the first step of the replacement procedure, you must switch your Brother DCP-8110DN on, and then wait at least 15 minutes. After that, you must release the lock of the front cover by pressing the little button, and then open the cover. Now, you must remove the drum unit along with the exhausted toner cartridge from the main compartment, and then release the exhausted component by pressing the green lever that is located on the right side of the drum unit. In the next step of the replacement procedure, you must remove the exhausted toner cartridge from the drum unit, and then unpack the replacement toner cartridge. Once the new toner cartridge is unpacked, you must shake it several times from side to side, and then remove the protective cover. Next, you must insert the new toner cartridge into the drum unit until it snaps into place, and then clean the primary corona wire. Finally, you must insert the drum unit and toner cartridge assembly into the Brother DCP-8110DN, and then close the front cover.