HP COLOR LASERJET CM1312MFP BLACK TONER CARTRIDGE

One fax error message that you will see when using the HP Color LaserJet CM1312nfi is “Fax delayed-Send memory full”. This message indicates that the fax memory is full. You can cancel the fax by pressing OK or CANCEL. If the error persists you may have to send the fax in separate pieces so that it does not exceed the memory of your machine.

Another error that you may see when faxing is “Fax is busy Canceled send”. This message tells you that the receiving end of the fax is busy. Your fax machine has canceled sending the fax. One way to deal with this problem is to call the recipient to check that their fax machine has been turned on and is functioning.

“Fax memory full Canceling recv.” tells you that your machine ran out of memory. Only the pages that there is enough memory for can be printed. If this error occurs repeatedly, you need to either clear the memory on your machine or add memory to your HP Color LaserJet CM1312nfi.

Sometimes when faxing you may encounter the message “Fax Send Error”. This indicates that an error occurred while trying to send a fax. You may want to resend the fax. Another way to deal with this problem is to try faxing to another fax number. Furthermore you may want to check that you have a dial tone. If the error continues to persist you need to contact a service technician.

“Invalid Entry” may appear when trying to fax. The reason for this is probably invalid data being sent. Simply correct the entry and you should be able to send a fax.

“No document sent” is another message that may appear on your LCD screen. This indicates that the machine didn’t scan any pages and did not receive any pages from the computer. You need to try sending the fax again.

“No fax answer. Canceled send” denotes that redialing the fax number failed or that the redial-no answer option was not turned on. One method for dealing with this problem is to call the recipient to check that their machine was turned on. You may also want to check that you are dialing the right number. If those two solutions don’t work, check that the redial option has been enabled.