KONICA MINOLTA MAGICOLOR 2300DL CYAN TONER CARTRIDGE

The message window will display which toner cartridge is empty by displaying TONER EMPTY [COLOR]. When this appears, press the MENU SELECT button to automatically cycle the toner so that the correct color will be removable, then open the front door of the printer.

Pull out the toner cartridge by inserting fingers into the two holes in front of it. Before discarding the used cartridge through a recycling program, check that the color and size matches that of the new toner cartridge to be installed. If the cartridges are a match, shake the new cartridge in various directions to break up the toner inside, then remove the yellow protective cover from the cartridge.

Before installing the cartridge, make sure that the color on the compartment inside the printer matches that of the cartridge itself. The Konica Minolta Magicolor 2300DL WILL ACCEPT toner of incorrect colors and therefore installing the wrong will could damage the printer.

Slide the new cartridge into place and close the front door behind it. It will then complete a 150 second calibration cycle on the new cartridge and then the message IDLE/MAGICOLOR 2300DL will appear. If you have installed a MINOLTA-QMS cartridge, you must also follow this procedure:

1) When IDLE MAGICOLOR 2300DL appears, press MENU SELECT.
2) MENU LANGUAGE will appear. Press RIGHT ARROW.
3) MENU ENGINE will appear. Press MENU SELECT.
4) Press RIGHT ARROW.
5) When ENGINE CHANGE TONER SZ appears, press MENU SELECT.
6) Select the correct color. Press RIGHT ARROW.
7) When [COLOR] HIGH CAPACITY appears, press MENU SELECT.