SHARP MX-2300N COLOR TONER CARTRIDGES SET

Your Sharp MX-2300N Color Laser Multifunctional System is equipped with four toner cartridges, and the toner level of each cartridge is constantly monitored by the built-in system. There are three different messages, that will be displayed on your MX-2300N display, when a toner cartridge/cartridges is running out of toner. The first message includes only the color of the exhausted cartridge, and it is displayed when the current toner level is lower than 25%. When the toner cartridge is close to the end of its lifecycle, you will see the following message ``Toner supply is low`` on the display. Once the toner cartridge is completely out of toner, the following message ``Change the toner cartridge`` will appear on the display. All three messages are displayed under the ``Ready to scan for copy`` status bar. If you notice any of the following messages, you must purchase a new toner cartridge/cartridges and replace the exhausted/old one.

You must start the toner cartridge replacement procedure by opening the front cover of your Sharp MX-2300N Color Laser Multifunctional System. Then, you will see all four toner cartridges in the following order (from left to right): Yellow, Magenta, Cyan, and Black. Once you`ve found the exhausted cartridge/cartridges, you must raise its lever and slowly pull it out horizontally toward you. Now, you must prepare the new toner cartridge by unpacking and shaking it horizontally 6-7 times, and then you can remove the protective cover from the cartridge by pulling it in the direction illustrated by the arrow. After that, you must insert the new toner cartridge in the MX-2300N by pushing it horizontally until it clicks into place. Finally, you can close the front cover and test your Sharp MX-2300N Color Laser Multifunctional System.