X500N YELLOW OEM TONER CARTRIDGE

You should replace the toner cartridges installed in your Lexmark X500n Laser Printer when any of the listed messages and print quality problems appears.

[<x> Toner Empty: Replace Toner <x>] – The indicated toner cartridge is empty and must be replaced.

[Missing: Install Toner <x>] – The Lexmark X500n Laser Printer does not detect the specified toner cartridge. Please make sure that the specified toner cartridge is installed correctly, and then test the laser printer. You must install a new toner cartridge of the specified color if the problem persists.

[Toner Error: Install Supported Toner Cartridge] – The indicated toner cartridge cannot be used in your Lexmark X500n Laser Printer. Please replace the specified toner cartridge with a new, compatible one.

[Toner Low <xxxx>] – The specified toner cartridge is nearly empty. You must make sure that you have a new set of toner cartridges in stock.

Repeating defects occurring every 1.38 in

White or incorrectly colored lines appear

Streaked horizontal lines

Printouts are too light

Printouts are too dark

Gray background

Uneven print density

Blank pages

Solid color printouts

Toner specks

In the first step of the replacement procedure, you must press the lock release button on the right side of the Lexmark X500n Laser Printer, and then open the front cover. After that, you must pull the exhausted toner cartridge towards you to remove it, and then take the new toner cartridge out of the transport box. Now, you must shake the new toner cartridge 7-8 times from side to side, and then remove the sealing tape and the protective cover from the new component. In the next step of the replacement procedure, you must align the new toner cartridge with the corresponding slot, and then insert it into the slot as far as it will go. Finally, you must close the front cover of your Lexmark X500n Laser Printer.