TOSHIBA E-STUDIO 353 TONER CARTRIDGE - HIGH YIELD

The E-Studio 353`s toner cartridge must be replaced, if the following message ``Install new toner cartridge`` appears, or/and the ``Replace toner cartridge`` symbol blinks. The above message will be displayed in the top left corner of your printer`s display, right above the currently selected program.

The toner cartridge replacement procedure requires no more than 5-10 minutes to be completely executed. Initially, you must open the front cover of your E-Studio 353 and lower the toner cartridge holder toward you, while pushing on the latch. Now, you can try to pull out the toner cartridge in direction towards you, but if it cannot be pulled out, then you can try to pull and rotate it in counterclockwise direction. Sometimes, even the above actions are not enough, and you must close the front cover, restart the printer (turn off-on), and then try again. Once the old toner cartridge is out, you can prepare the new one by tapping and shaking it several times to loosen the toner inside. After that, you must put the new toner cartridge on a flat surface and pull out the protective seal in the direction illustrated by the arrow. Now, you must insert the new toner cartridge by matching the orange label on the printer with the shutter`s orange label. Finally, you can return the cartridge holder to its original position and close the front cover of your TOSHIBA E-STUDIO 353 Laser Printer.