PHASER 7300 YELLOW DRUM

Initially, you must open the top cover of your Xerox Phaser 7300 Color Laser Printer, taking care not to touch the LED print heads that are located on the inner side of the cover. Then, you must remove the toner cartridge that is inserted into the exhausted drum from the laser printer. After that, you must cover the removed toner cartridge with a sheet of dark paper to reduce the exposure of the cartridge to direct light, and then remove the exhausted drum by pulling it straight upwards. Please do not shake or tilt the used drum unit. Now, you must unpack a new drum of the corresponding color, and then remove the protective tape and paper from the new component. In the next step of the installation, you must insert the new drum firmly into the corresponding slot, and then remove the protective cover. Once the new drum is installed, you must reinstall the toner cartridge, and then push its lock/release lever towards the rear side of the main unit until you hear a click. Finally, you must use the included cleaning paper to clean the four LED print heads, and then close the top cover of your Xerox Phaser 7300 Color Laser Printer.